2005年10月巴基斯坦MW7.6地震对余震的触发研究

本文研究分析了2005年10月8日巴基斯坦主震产生的库仑破裂应力变化对余震的影响。计算时考虑了以下因素：（1）断层泥区域的孔隙流体压力和介质弹性常数与周围介质中的不同；（2）地震震源区的构造应力场方向；（3）将震源区构造应力和主震破裂产生的应力叠加计算得到余震破裂机制。该研究考虑了多种因素，计算结果与余震的分布比较吻合。结果表明2005年10月8日巴基斯坦主震对大部分余震有触发作用。     

贵州大方煤田主采煤层的矿物学异常及其对元素地球化学的影响

运用电感耦合等离子体质谱(ICP-MS)、X射线荧光光谱(XRF)、带能谱仪的扫描电镜(SEM-EDX)、逐级化学提取(SCEP)和光学显微镜等方法,对贵州大方煤田11号煤层的地球化学和矿物学进行了研究。结果表明,大方煤田11号煤层中有高含量的脉状石英(11.4%)和脉状铁白云石(10.2%),铁白云石周边常被针铁矿所包裹,在脉状石英中发现有热液成因的黄铜矿、闪锌矿和硒方铅矿,此外,还有少量高岭石充填在脉中,这7种矿物常常同脉共存。脉状石英和脉状铁白云石分别来源于硅质和富铁的钙质低温热液流体,形成温度分别为180℃和85℃。脉状石英早于脉状铁白云石形成。根据Ca/Sr和Fe/Mn值,确定出铁白云石的形成至少经历了3个时期。这7种矿物按照从早到晚的生成顺序为硫化物、石英、高岭石、铁白云石和针铁矿。铁白云石是煤中Mn、Cu、Ni、Pb和Zn富集的主要原因,这5种微量元素的含量分别为0.09%、74.0μg/g、33.6μg/g、185μg/g和289μg/g。脉状石英是煤中铂族元素Pd、Pt和Ir的主要载体,它们在煤中的含量分别为1.57μg/g、0.15μg/g和0.007μg/g。另外,黄铜矿、闪锌矿和硒方铅矿亦是11号煤层中Cu、Zn和Pb的重要载体。     

ANN技术在岩溶地下水可开采量评价中的应用——以山西晋祠泉域为例

以晋祠泉域为例,分析该泉域水文地质特征。应用神经网络技术(ANN)建立泉域内县代表性的难老泉岩溶地下水位与各种补排项之间定量数学模型,对该泉域地下水可开采量进行了评价。研究结果表明,所建立的岩溶地下水位多因素神经网络模型具有较好的拟合精度,仿真程度较高,所得到的地下水可采资源量评价结果与该地区地下水开发利用实际情况较为一致。同时,还计算了不同降雨条件下地下水的可开采量,使其对地下水的开采规划更具有指导意义。     

接地电阻测量中应注意的几个问题

参照国家有关规范和标准的要求，对接地装置、接地电阻及其测量原理进行分析和总结，指出4102型和摇表式接地电阻仪测量接地电阻时电极的布置方法对测量结果的影响。     

Evaluation ofCitrullus colocynthis, a desert plant native in Israel, as a potential source of edible oil

Citrulus colocynthis(wild gourd) is a desert plant of the Cucurbitaceae, naturally adapted to arid environments. It was known in biblical times as a source of seed oil and its fruits were used as an efficient laxative. Accessions were collected in Israel and evaluated as a potential oil seed crop adapted to arid zones. It was found that its oil composition is similar to safflower oil, with a total of 80-85% unsaturated fatty acids. A potential yield of oil of 250-400 l ha⁻¹was calculated. The best yield was obtained during the first 4 weeks of the 10-week maturation period. Yield potential should be estimated under desert conditions in order to evaluate the plant's economic future as a crop suitable for an arid environment.     

Some remarks on the development of sedimentary basins

A simple model for the development and evolution of sedimentary basins is proposed. The first event consists of a rapid stretching of continental lithosphere, which produces thinning and passive upwelling of hot asthenosphere. This stage is associated with block faulting and subsidence. The lithosphere then thickens by heat conduction to the surface, and further slow subsidence occurs which is not associated with faulting. The slow subsidence and the heat flow depend only on the amount of stretching, which can be estimated from these quantities and from the change in thickness of the continental crust caused by the extension. The model is therefore easily tested. Preliminary investigations of the Great Basin, the Aegean, the North Sea and the Michigan Basin suggest that the model can account for the major events in their evolution.     

The variation of temperature with time and hydrocarbon maturation in sedimentary basins formed by extension

When a sedimentary basin is formed by extension both the subsidence history and the temperature gradient can be calculated. Hence the time-temperature history of any stratum can be obtained. Three types of behaviour occur. The temperature of material which never reaches depths greater than about 4 km increases at all times. The time-temperature history of material which finally sinks to greater depths reaches a maximum during the subsidence history. The time at which this maximum occurs decreases as the depth increases. At greater depths the maximum temperature occurs at the time the basin is formed. The time-temperature history is then used to calculate Lopatin's maturation index for each stratum as a function of time, and the index plotted as a function of depth and time for different amounts of extension. The maximum temperature at a given depth, and hence Lopatin's index, is almost independent of the amount of extension when the age of the basin is greater than about 150 Ma. Similar calculations taking account of sediment compaction show the same behaviour, though the maturity of the material at a given depth is increased. Because both Lopatin's index and its calibration are empirical it is important to develop new maturation indices based on individual molecular reactions whose activation energies can be determined in the laboratory.     

On the automatic interpretation of direct current resistivity soundings

A method for the automatic inversion of resistivity soundings is presented. The procedure consists of two main stages. First, application of linear filters which transforms the apparent resistivity curve into the kernel function, and vice versa. In the second stage the first and second derivatives of the kernel function are calculated and used in a second-order modified Newton-Raphson iterative fitting procedure. The model obtained is optimal in the least squares sense. The method has been tried on some field examples and produced resistivity models which show a good agreement with the geological well logs.