Inversely graded turbidite sequences in the deep Mediterranean: a record of deposits from flood-generated turbidity currents?

Turbidity currents generated during floods of small and medium rivers have been demonstrated to be an important process of sediment transport from continent to abyss. They produce fine-grained turbidite deposits. No deposit related to these flood-related turbidity currents has yet been described in the deep sea. In this paper, we present some unusual sandy to muddy turbidite beds cored in the Var turbidite system (NW Mediterranean). They show a coarsening-upward basal unit capped with a classical fining-upward unit which are related to the periods of increasing and decreasing discharge at the river mouth, respectively. The two units are separated by a contact which can be gradational to erosional. This intrabed contact is interpreted as resulting from erosion during peak flood conditions. This intrabed contact can be confused with classical basal contacts of turbidite beds. The frequency of hyperpycnal turbidite beds can be used to relate climatic changes inland to the deep-sea sedimentary record, as an increase corresponds to periods of enhanced flooding at the river mouth.     

The R{\overline{3}} c \to R{\overline{3}} m transition in nitratine, NaNO3, and implications for calcite, CaCO3

The temperature dependences of the crystal structure and superstructure intensities in sodium nitrate, mineral name nitratine, NaNO₃, were studied using Rietveld structure refinements based on synchrotron powder X-ray diffraction. Nitratine transforms from $R{\overline{3}} c\;\hbox{to}\;R{\overline{3}} m$ at T _c = 552(1) K. A NO₃ group occupies, statistically, two positions with equal frequency in the disordered $R{\overline{3}} m$ phase, but with unequal frequency in the partially ordered $R{\overline{3}} c$ phase. One position for the NO₃ group is rotated by 60° or 180° with respect to the other. The occupancy of the two orientations in the $R{\overline{3}} c$ phase is obtained from the occupancy factor, x, for the O1 site and gives rise to the order parameter, S = 2x ? 1, where S is 0 at T _c and 1 at 0 K. The NO₃ groups rotate in a rapid process from about 541 to T _c, where the a axis contracts. Using a modified Bragg–Williams model, a good fit was obtained for the normalized intensities (that is, normalized, NI^1/2) for the (113) and (211) reflections in $R{\overline{3}} c\hbox {\,NaNO}_{3},$ and indicates a second-order transition. Using the same model, a reasonable fit was obtained for the order parameter, S, and also supports a second-order transition.     

Sedimentology and sequence stratigraphy of Aquitanian and Burdigalian stratotypes in the Bordeaux area (southwestern France)

The historical stratotypes of the Aquitanian and Burdigalian in the Aquitaine Basin are studied here by using the tools of facies sedimentology and the concept of sequence stratigraphy. This analytical method combines recognition and sequential organization of facies, and several types of stratigraphic markers. This method allows identification of at least six depositional sequences within the Miocene of the Saucats area: the four lower ones belong to the Aquitanian, the fifth one to the whole Burdigalian, while the sixth sequence corresponds to the Serravallian. In addition, this method provides evidence of a period of emersion before each transgression, suggesting potential fluvial erosion. Nevertheless, these phases are of lower amplitude than those observed in the Rhodano-Provençal Basin.

Résumé

Les stratotypes historiques de l’Aquitanien et du Burdigalien, en Aquitaine, sont étudiés ici en termes de sédimentologie de faciès et de stratigraphie séquentielle. Cette méthode d’analyse combine la reconnaissance et l’organisation séquentielle des faciès à plusieurs types de repères stratigraphiques. Elle permet d’identifier au moins six séquences de dépôt dans le Miocène de la région de Saucats : les quatre premières dans l’Aquitanien, la cinquième pour le Burdigalien et la dernière pour le Serravallien. Elle a également permis de mettre en évidence des phases d’émersion anté-transgression, suggérant de possibles érosions fluviatiles, mais d’ampleurs inférieures à celles reconnues dans le Bassin miocène rhodano-provençal.     

Risk of injury and death from lightning in Northern Malawi

Rates of lightning mortality in communities on the western shore of Lake Malawi are higher than any other reported rate in the world: 419 strike victims per million people per annum and 84 deaths per million per annum. To document the background to this phenomenon, we conducted comprehensive household interviews with surviving victims and witnesses of every case of lightning strike in seven administrative areas around Nkhata Bay, Malawi. We find that the consequential lightning strikes are significantly more common in the rainy season and during the morning. Among those victims struck by lightning, there is an average ratio of approximately one death to four injuries, which is substantially higher than the commonly accepted ratio of 1:10. Children and adults are at equal risk of being struck. If struck, the probability of death is greater when the victim is outside in the open or outside under cover than indoors under a tin or thatched roof, but is unaffected by different kinds of footwear or whether it is raining. Reported explanations for strikes often center on witchcraft or other forms of social conflict. Our findings extend the study of consequential lightning strikes in the developing world and highlight cultural factors associated with this hazard. We end with recommendations for reducing the risk of lightning for rural populations.     

Comparing the activity of aluminum in two B horizons developed from volcanic ash deposits in Japan, dominated by short-range ordered aluminosilicates and crystalline clay minerals, respectively

Mechanisms controlling the activity of free aluminum (Al) in Bw1 horizons of soils developed from volcanic ash deposits in Japan were investigated by means of acid-base titrations and kinetic studies. In a Bw1 horizon, with a high content of acid-oxalate extractable Al, soil solution reached equilibrium with short-range ordered aluminosilicates in the order of days. Relatively fast kinetics of the release and precipitation of Al and Si indicate a high reactivity of short-range ordered aluminosilicates in the soil. In the Bw1 horizon of an adjacent soil, with a high content of crystalline clay minerals like halloysite and interlayered vermiculite, solution remained well undersaturated with respect to short-range ordered aluminosilicates and aluminum hydroxide. Apparent equilibrium with respect to halloysite occurred after more than 30 days. This halloysite ( (25 °C)) has a solubility that is less than that reported in the literature ( (25°C)). Our findings suggest that different reactive aluminosilicates may control the activity of free Al in sub-surface horizons of volcanic ash soils with different mineralogy.     

Concepts and science for coastal erosion management - An introduction to the Conscience framework

The main objective of the Conscience project was to develop and test concepts, guidelines and tools for the sustainable management of erosion along the European coastline, based on the best available scientific knowledge and on existing practical experience. Four concepts are potentially capable of providing the nexus between scientific knowledge and management: coastal resilience, coastal sediment cell, favourable sediment status and strategic sediment reservoir. The project has tested the use of these concepts and found that they are useful, provided that they are positioned and linked within a logical structure that we shall call the Conscience “Frame of Reference”, defined in time and space and supported through data and monitoring. Practical experience in six coastal sites in Europe has shown that the use of this Frame of Reference together with these concepts can make management objectives explicit and transparent. It can therefore support the design of an appropriate, resilience based coastal erosion management practice.     

Characteristics of post-separation families in the Netherlands: shared residence versus resident mother arrangements

Besides the traditional post-separation residential arrangement in which the children live with the mother and have regular contact with the father, new arrangements have emerged and become more widespread in which parents strive for a more equal division of tasks. We used an explanatory mixed methods research design to enhance insight into the life course characteristics of separated parents involved in shared residence arrangements. Survey data derived from the Netherlands Kinship Panel Study (NKPS) and Divorce in the Netherlands 1998 were supplemented with information from in-depth interviews with NKPS respondents. We found that shared residence parents seem to be a typical modern category of separated parents with a specific set of characteristics. The distance between the residences of the ex-partners plays a crucial role in maintaining a shared residence arrangement. Highly educated, dual-career ex-couples, and those with high incomes are also more likely to be involved in a shared residence arrangement. Shared residence arrangements were more likely when the woman had a new partner, but less likely when the man had a new partner. Our findings on gender differences are in line with the idea that involvement in non-traditional residential arrangements is a sign of increased paternal involvement, but decreased maternal involvement, compared with the traditional arrangements.     

Mechanics of interrill erosion with wind‐driven rain

The vector physics of wind‐driven rain (WDR) differs from that of wind‐free rain, and the interrill soil detachment equations in the Water Erosion Prediction Project (WEPP) model were not originally developed to deal with this phenomenon. This article provides an evaluation of the performance of the interrill component of the WEPP model for WDR events. The interrill delivery rates were measured in the wind tunnel facility of the International Center for Eremology (ICE), Ghent University, Belgium with an experimental setup to study different raindrop impact velocity vectors. Synchronized wind and rain simulations with wind velocities of 6, 10 and 14 m s^–1 were applied to a test surface placed on windward and leeward slopes of 7, 15 and 20%. Since both rainfall intensity and raindrop impact velocity varied greatly depending on differences in the horizontal wind velocity under WDRs, the resultant kinetic energy flux (KE_r, in J m^–2 s^–1) was initially used in place of the WEPP model intensity term in order to incorporate the effect of wind on impact velocity and frequency of raindrops. However, our results showed only minor improvement in the model predictions. For all research data, the model Coefficients of Determination (r²) were 0·63 and 0·71, when using the WEPP and the KE_r approaches, respectively. Alternately, integrating the angle of rain incidence into the model by vectorally partitioning normal kinetic energy flux (KE_rn, in J m^–2 s^–1) from the KE_r greatly improved the model's ability to estimate the interrill sediment delivery rates (r² = 0·91). This finding suggested that along with the fall trajectory of wind‐driven raindrops with a given frequency, raindrop velocity and direction at the point of impact onto the soil surface provided sufficient physical information to improve WEPP sediment delivery rate predictions under WDR. Copyright © 2012 John Wiley & Sons, Ltd.     

A comparison of continuous mass‐lumped finite elements with finite differences for 3‐D wave propagation

The finite‐difference method on rectangular meshes is widely used for time‐domain modelling of the wave equation. It is relatively easy to implement high‐order spatial discretization schemes and parallelization. Also, the method is computationally efficient. However, the use of finite elements on tetrahedral unstructured meshes is more accurate in complex geometries near sharp interfaces. We compared the standard eighth‐order finite‐difference method to fourth‐order continuous mass‐lumped finite elements in terms of accuracy and computational cost. The results show that, for simple models like a cube with constant density and velocity, the finite‐difference method outperforms the finite‐element method by at least an order of magnitude. Outside the application area of rectangular meshes, i.e., for a model with interior complexity and topography well described by tetrahedra, however, finite‐element methods are about two orders of magnitude faster than finite‐difference methods, for a given accuracy.     

Isotope Approach to Assess Hydrologic Connections During Marcellus Shale Drilling

Water and gas samples were collected from (1) nine shallow groundwater aquifers overlying Marcellus Shale in north‐central West Virginia before active shale gas drilling, (2) wells producing gas from Upper Devonian sands and Middle Devonian Marcellus Shale in southwestern Pennsylvania, (3) coal‐mine water discharges in southwestern Pennsylvania, and (4) streams in southwestern Pennsylvania and north‐central West Virginia. Our preliminary results demonstrate that the oxygen and hydrogen isotope composition of water, carbon isotope composition of dissolved inorganic carbon, and carbon and hydrogen isotope compositions of methane in Upper Devonian sands and Marcellus Shale are very different compared with shallow groundwater aquifers, coal‐mine waters, and stream waters of the region. Therefore, spatiotemporal stable isotope monitoring of the different sources of water before, during, and after hydraulic fracturing can be used to identify migrations of fluids and gas from deep formations that are coincident with shale gas drilling.