Engineering geological maps: A cost-benefit analysis

This paper describes an eight-step procedure designed for cost-benefit analyses concerning the preparation of engineering geological maps in general. This procedure is discussed in relation to engineering geological maps of Amsterdam as an example of an old city with many historical buildings. From the results of this analysis, it is concluded that the breakeven point will be reached in 3.2 years if only the costs of site investigation and archive searches are taken into account, and in less than 1.2 years if potential savings due to improved site selection are included.     

Ecohydrographic constraints on biodiversity and distribution of phytoplankton and zooplankton in coral reefs of the Red Sea,Saudi Arabia

An integral concept of ecological research is the constraint of biodiversity along latitudinal and environmental gradients. The Red Sea features a natural example of a latitudinal gradient of salinity, temperature and nutrient richness. Coral reefs along the Red Sea coasts are supported with allochthonous resources such as oceanic and neritic phytoplankton and zooplankton; however, relatively little is known about how the ecohydrography correlates with plankton biodiversity and abundance. In this article we present the biodiversity of phytoplankton and zooplankton in Red Sea coral reefs. Oceanographic data (temperature, salinity), water samples for nutrient analysis, particulate organic matter, phytoplankton and zooplankton, the latter with special reference to Copepoda (Crustacea), were collected at nine coral reefs over ~1500 km distance along the Red Sea coast of Saudi Arabia. The trophic state of ambient waters [as indicated by chlorophyll a (Chl a)] changed from strong oligotrophy in the north to mesotrophy in the south and was associated with increasing biomasses of Bacillariophyceae, picoeukaryotes and Synechococcus as indicated by pigment fingerprinting (CHEMTAX) and flow cytometry. Net‐phytoplankton microscopy revealed a Trichodesmium erythraeum (Cyanobacteria) bloom north of the Farasan Islands. Several potentially harmful algae, including Dinophysis miles and Gonyaulax spinifera (Dinophyceae), were encountered in larger numbers in the vicinity of the aquaculture facilities at Al Lith. Changes in zooplankton abundance were mainly correlated to the phytoplankton biomass following the latitudinal gradient. The largest zooplankton abundance was observed at the Farasan Archipelago, despite high abundances of copepodites, veligers (Gastropoda larvae) and Chaetognatha at Al Lith. Although the community composition changed over latitude, biodiversity indices of phytoplankton and zooplankton did not exhibit a systematic pattern. As this study constitutes the first current account of the plankton biodiversity in Red Sea coral reefs at a large spatial scale, the results will be informative for ecosystem‐based management along the coastline of Saudi Arabia.     

Perched lobe formation in the Gulf of Cadiz: Interactions between gravity processes and contour currents (Algarve Margin, Southern Portugal)

The Gulf of Cadiz is swept by the strong saline Mediterranean Outflow Water (MOW). On the Algarve Margin (South Portugal), this current has constructed fine-grained contourite drifts. This margin is dissected by the Portimao Canyon and three short channels that only incise the upper slope, and are absent on a terrace located at mid-slope depths along the Algarve Margin. High-resolution seismic profiles and sediment cores highlight the original architecture of the sedimentary deposits on this terrace. Coarse-grained lenticular chaotic bodies formed during major relative sea-level lowstands are intercalated within the drift. The lobate shape and sandy nature of the lenticular chaotic bodies and their location at the mouths of the three short channels suggest they are gravity-generated deposits that are perched on the middle continental slope.In the Gulf of Cadiz, the interaction between contour current and gravity processes is strongly controlled by climatic variations and relative sea-level changes during the late Quaternary. During cold periods when sea-level was low, erosion intensified on the continental shelf and the deepest part of MOW was active. Sediment was transported downslope through the channels and deposited on sedimentary lobes perched on the mid-slope terrace. During warm periods when relative sea-level was high, the supply of sediment from the shelf was shut off and the shallowest part of MOW was more active. Contourite drifts fill the channels and bury the sandy lobes.     

Amphibole as an archivist of magmatic crystallization conditions: problems,potential, and implications for inferring magma storage prior to the paroxysmal 2010 eruption of Mount Merapi,Indonesia

Amphibole is widely employed to calculate crystallization temperature and pressure, although its potential as a geobarometer has always been debated. Recently, Ridolfi et al. (Contrib Mineral Petrol 160:45–66, 2010) and Ridolfi and Renzulli (Contrib Mineral Petrol 163:877–895, 2012) have presented calibrations for calculating temperature, pressure, fO₂, melt H₂O, and melt major and minor oxide composition from amphibole with a large compositional range. Using their calibrations, we have (i) calculated crystallization conditions for amphibole from eleven published experimental studies to examine the problems and the potential of the new calibrations; and (ii) calculated crystallization conditions for amphibole from basaltic–andesitic pyroclasts erupted during the paroxysmal 2010 eruption of Mount Merapi in Java, Indonesia, to infer pre-eruptive conditions. Our comparison of experimental and calculated values shows that calculated crystallization temperatures are reasonable estimates. Calculated fO₂ and melt SiO₂ content yields potentially useful estimates at moderately reduced to moderately oxidized conditions and intermediate to felsic melt compositions. However, calculated crystallization pressure and melt H₂O content are untenable estimates that largely reflect compositional variation in the crystallizing magmas and crystallization temperature and not the calculated parameters. Amphibole from Merapi’s pyroclasts yields calculated conditions of ~200–800 MPa, ~900–1,050 °C, ~NNO + 0.3–NNO + 1.1, ~3.7–7.2 wt% melt H₂O, and ~58–71 wt% melt SiO₂. We interpret the variations in calculated temperature, fO₂, and melt SiO₂ content as reasonable estimates, but conclude that the large calculated pressure variation for amphibole from Merapi and many other arc volcanoes is evidence for thorough mixing of mafic to felsic magmas and not necessarily evidence for crystallization over a large depth range. In contrast, bimodal pressure estimates obtained for other arc magmas reflect amphibole crystallization from mafic and more evolved magmas, respectively, and should not necessarily be taken as evidence for crystallization in two reservoirs at variable depth.     

Quantifying terrain controls on runoff retention and routing in the Northern Prairies

The role of hummocky terrain in governing runoff routing and focussing groundwater recharge in the Northern Prairies of North America is widely recognised. However, most hydrological studies in the region have not effectively utilised information on the surficial geology and associated landforms in large-scale hydrological characterization. The present study uses an automated digital elevation model (DEM) analysis of a 6500-km² area in the Northern Prairies to quantify hydrologically relevant terrain parameters for the common types of terrains in the prairies with different surficial deposits widespread in the prairies, namely, moraines and glaciolacustrine deposits. Runoff retention (and storage) capacity within depressions varies greatly between different surficial deposits and is comparable in magnitude with a typical amount of seasonal snowmelt runoff generation. The terrain constraint on potential runoff retention varies from a few millimetres in areas classified as moraine to tens of millimetres in areas classified as stagnant ice moraine deposits. Fluted moraine and glaciolacustrine deposits have intermediate storage capacity values. The study also identified the probability density function describing a number of immediate upstream neighbours for each depression in a fill-and-spill network. A relationship between depression parameters and surficial deposits, as well as identified depression network structure, allows parametrisation of hydrologic models outside of the high-resolution DEM coverage, which can still account for terrain variation in the Prairies.     

The oldest tylosaurine mosasaur (Reptilia; Lacertilia) from the Late Cretaceous of Belgium: Hermann von Meyer (1860) revisited

A mosasaurid parietal from the Late Cretaceous of Belgium, originally described by Von Meyer (1860), turns out to be assignable to the tylosaurine Hainosaurus cf. bernardi Dollo 1885. A small sediment sample, extracted from the bone, was analysed for coccoliths and revealed its early Late Campanian age. This is thus the earliest record of a tylosaurine mosasaur from Belgium.     

The effect of geometry and tidal forcing on hydrodynamics and net sediment transport in semi-enclosed tidal basins

A new depth-averaged exploratory model has been developed to investigate the hydrodynamics and the tidally averaged sediment transport in a semi-enclosed tidal basin. This model comprises the two-dimensional (2DH) dynamics in a tidal basin that consists of a channel of arbitrary length, flanked by tidal flats, in which the water motion is being driven by an asymmetric tidal forcing at the seaward side. The equations are discretized in space by means of the finite element method and solved in the frequency domain. In this study, the lateral variations of the tidal asymmetry and the tidally averaged sediment transport are analyzed, as well as their sensitivity to changes in basin geometry and external overtides. The Coriolis force is taken into account. It is found that the length of the tidal basin and, to a lesser extent, the tidal flat area and the convergence length determine the behaviour of the tidally averaged velocity and the overtides and consequently control the strength and the direction of the tidally averaged sediment transport. Furthermore, the externally prescribed overtides can have a major influence on tidal asymmetry in the basin, depending on their amplitude and phase. Finally, for sufficiently wide tidal basins, the Coriolis force generates significant lateral dynamics.     

Debris-flow-dominated sediment transport through a channel network after wildfire

Field studies that investigate sediment transport between debris-flow-producing headwaters and rivers are uncommon, particularly in forested settings, where debris flows are infrequent and opportunities for collecting data are limited. This study quantifies the volume and composition of sediment deposited in the arterial channel network of a 14-km² catchment (Washington Creek) that connects small, burned and debris-flow-producing headwaters (<1 km²) with the Ovens River in SE Australia. We construct a sediment budget by combining new data on deposition with a sediment delivery model for post-fire debris flows. Data on deposits were plotted alongside the slope–area curve to examine links between processes, catchment morphometry and geomorphic process domains. The results show that large deposits are concentrated in the proximity of three major channel junctions, which correspond to breaks in channel slope. Hyperconcentrated flows are more prominent towards the catchment outlet, where the slope–area curve indicates a transition from debris flow to fluvial domains. This shift corresponds to a change in efficiency of the flow, determined from the ratio of median grain size to channel slope. Our sediment budget suggests a total sediment efflux from Washington Creek catchment of 61 × 10³ m³. There are similar contributions from hillslopes (43 ± 14 × 10³ m³), first to third stream order channel (35 ± 12 × 10³ m³) and the arterial fourth to fifth stream order channel (31 ± 17 × 10³ m³) to the total volume of erosion. Deposition (39 ± 17 × 10³ m³) within the arterial channel was higher than erosion (31 ± 17 × 10³ m³), which means a net sediment gain of about 8 × 10³ m³ in the arterial channel. The ratio of total deposition to total erosion was 0.44. For fines <63 μm, this ratio was much smaller (0.11), which means that fines are preferentially exported. This has important implications for suspended sediment and water quality in downstream rivers. © 2019 John Wiley & Sons, Ltd.     

Beerkan multi-runs for characterizing water infiltration and spatial variability of soil hydraulic properties across scales

A method is presented for characterizing the spatial variability of water infiltration and soil hydraulic properties at the transect and field scales. The method involves monitoring a set of 10 Beerkan runs distributed over a 1-m length of soil, and running BEST (Beerkan estimation of soil transfer parameters) methods to derive hydraulic parameters. The Beerkan multi-runs (BMR) method provides a significant amount of data at the transect scale, allowing the determination of correlations between water infiltration variables and hydraulic parameters, and the detection of specific runs affected by preferential flow or water repellence. The realization of several BMRs at several transects on the same site allows comparison of the variation between locations (spatial variability at the field scale) and at the transect scale (spatial variability at the metre scale), using analysis of variance. From the results, we determined the spatial variability of water infiltration and hydraulic parameters as well as its characteristic scale (transect versus field).