The stable isotope signature of kilometre-scale fracturedominated metamorphic fluid pathways, Mary Kathleen, Australia

Abstract Large calcite veins and pods in the Proterozoic Corella Formation of the Mount Isa Inlier provide evidence for kilometre-scale fluid transport during amphibolite facies metamorphism. These 10- to 100-m-scale podiform veins and their surrounding alteration zones have similar oxygen and carbon isotopic ratios throughout the 200 × 10-km Mary Kathleen Fold Belt, despite the isotopic heterogeneity of the surrounding wallrocks. The fluids that formed the pods and veins were not in isotopic equilibrium with the immediately adjacent rocks. The pods have δ¹³C_calcite values of –2 to –7% and δ¹⁸O_calcite values of 10.5 to 12.5%. Away from the pods, metadolerite wallrocks have δ¹⁸O_whole-rock values of 3.5 to 7%. and unaltered banded calc-silicate and marble wallrocks have δ¹³C_calcite of –1.6 to –0.6%, and δ¹⁸O_calcite of 18 to 21%. In the alteration zones adjacent to the pods, the δ¹⁸O values of both metadolerite and calc-silicate rocks approach those of the pods. Large calcite pods hosted entirely in calc-silicates show little difference in isotopic composition from pods hosted entirely in metadolerite. Thus, 100- to 500-m-scale isotopic exchange with the surrounding metadolerites and calc-silicates does not explain the observation that the δ¹⁸O values of the pods are intermediate between these two rock types. Pods hosted in felsic metavolcanics and metasiltstones are also isotopically indistinguishable from those hosted in the dominant metadolerites and calc-silicates. These data suggest the veins are the product of infiltration of isotopically homogeneous fluids that were not derived from within the Corella Formation at the presently exposed crustal level, although some of the spread in the data may be due to a relatively small contribution from devolatilization reactions in the calc-silicates, or thermal fluctuations attending deformation and metamorphism. The overall L-shaped trend of the data on plots of δ¹³C vs. δ¹⁸O is most consistent with mixing of large volumes of externally derived fluids with small volumes of locally derived fluid produced by devolatilization of calc-silicate rocks. Localization of the vein systems in dilatant sites around metadolerite/calc-silicate boundaries indicates a strong structural control on fluid flow, and the stable isotope data suggest fluid migration must have occurred at scales greater than at least 1 km. The ultimate source for the external fluid is uncertain, but is probably fluid released from crystallizing melts derived from the lower crust or upper mantle. Intrusion of magmas below the exposed crustal level would also explain the high geothermal gradient calculated for the regional metamorphism.     

A high‐resolution pollen and geochemical analysis of late Holocene human impact and vegetation history in southern Cumbria,England

The historic era, which in Cumbria begins with the Roman invasion of AD 71, is a frequently neglected period in palaeoecological research, but its study can bring benefits in improving knowledge of landscape history and in understanding the significance and limitations of palaeoecological records. Pollen and geochemical data are presented for late Holocene records from Deer Dyke and Hulleter Mosses in southern Cumbria. The records show initially low levels of anthropogenic impact, followed by a phase of forest clearance and mixed agriculture from the 7th to 11th centuries AD. The timing of these clearances suggests that they were initially Anglo‐Saxon in origin, rather than Norse. Further clearances in the 16th century AD are interpreted as a response to monastic dissolution and late Tudor population pressures; the landscapes reached their contemporary form following extensive clearances in the 17th century AD. Silicon and titanium concentrations at Deer Dyke Moss were used to reconstruct past levels of atmospheric dust loading, which is broadly related to soil erosion. Geochemical influx was found to peak during periods of landscape transition rather than from established land use. This relationship with pollen data is thought to reflect the predominantly low levels of anthropogenic impact in the region, which changes as substantial woodland clearances during the 16th century AD and continuous land use pressure since then have greatly increased the supply of airborne dust. Copyright © 2008 John Wiley & Sons, Ltd.     

Kinematic Analysis of Near and Far Stars in the Hipparcos Catalog

The proper motions of stars in the main sequence and of luminosity class III giants are analyzed kinematically. A new method has been used for reliably separating all the parameters of the Ogorodnikov-Milne model based on representing the proper motions of the stars in coordinate systems whose poles lie on each of the three principal axes of the galactic trihedron. Solutions for stars in different spectral classes are obtained. The main sequence is found to subdivide into two zones (near and far stars) with a fairly sharp boundary at B-V=0.5. It is shown that the Parenago effect may be related to the different distances from the sun of the main sequence stars.     

Evolution of the Radio Luminosities of the Tycho and Kepler Supernovae Remnants

Radio emission of the historical supernovae remnants Tycho (SNR1572) and Kepler (SNR1604) and evolution of their luminosity are considered. Measurement data of secular luminosity decrease rate, obtained earlier by the authors, were corrected with account of variation in time of the flux density of the reference sources. As a result, it is found that the SNR1604 luminosity at 1667 MHz is weakening with an annual mean rate equal to (0.2 ± 0.07)%. The corresponding rate for SNR1572 is (0.47 ± 0.05)%. Since the radio luminosity evolution, as well as energy densities of magnetic field and relativistic electrons inside SNR1604 and SNR1572 are essentially different, these remnants should be considered as different types of supernovae. Bandiera classified SN1604 as type SNIb or SNII.     

Computer Simulation of Sputtering of Lunar Regolith by Solar Wind Protons: Contribution to Change of Surface Composition and to Hydrogen Flux at the Lunar Poles

A computer simulation of the sputtering of lunar soil by solar wind protons was performed with the TRIM program. The rate of the sputtering-induced erosion of regolith particles was shown to be less than 0.2 Å per year. A preferential sputtering of Ca, Mg, and O was found along with a less intense sputtering of Fe, Si, and Ti. However, with no other selection mechanisms, surface concentrations of the atoms would differ from the volume ones by no more than 6 %. The enrichment of rims of regolith particles with iron occurs as a result of selective removal of lighter atoms from the lunar surface because of different energies of escape from the Moon's gravity. The energy distributions proved to be the same for all sorts of the sputtered atoms, except for implanted hydrogen; thus, a greater fraction of the atoms left on the lunar surface corresponds to heavier elements. According to simulation results, the concentration of reduced iron observed in the mature regolith could be attained during the time of regolith particle exposure to the present flux of solar wind (10⁵ years). Thus, sputtering can provide the concentration of Fe₀ observed in regolith. On periphery of a cloud of impact vapor the temperature is too low for an irreversible selective removal of evaporation products; thus, a meteoritic bombardment contributes to the formation of composition of the rims of regolith particles mainly through enrichment of the rims with elements from the bulk of the particles. The estimates of fluxes of backscattered solar wind protons and of sputtered protons, earlier implanted to the regolith, demonstrated that their contribution to the proton flux near the poles is only 10⁴ cm^–2 s^–1. This is by two orders of magnitude smaller than the proton flux from the Earth's magnetosphere which is, therefore, the main source of protons for permanently shaded polar craters of the Moon.     

A Method for the Determination of an Intermediate Orbit from Three Positions of the Small Body on the Celestial Sphere

A new method is suggested for finding the preliminary orbit from three complete measurements of the angular coordinates of a celestial body developed by analogy with the classic Lagrange–Gauss method. The proposed method uses the intermediate orbit that we had constructed in an earlier paper based on two position vectors and the corresponding time interval. This intermediate orbit allows for most of the perturbations in the motion of the body. Using the orbital motion of asteroid 1566 Icarus as an example, we compare the results obtained by applying the classic and the new method. The comparison shows the new method to be highly efficient for studying perturbed motion. It is especially efficient if applied to high-precision observational data covering short orbital arcs.     

Late Cretaceous-Paleogene Palynostratigraphy from the Arkhara-Boguchan Brown Coal Mine of Zeya-Bureya Depression, Russia

1IntroductionThe Arkhara-Boguchan brown coal mine is lo-cated in the western Arkhara depression,southeast-ern part of the Zea-Bureya Basin (Fig.1). Late Creta-ceous-Paleogene coal-bearing strata are well out-cropped at the Arkhara-Boguchan quarry. It contains four coal-bearing beds (in descending order): “Ve-likan”, “Promezhutochny”,“Dvoinoy”and “Nyzhny”, and composed of three sedimentary cycles (Fig.2). The lower cycle can be divided into two sub-cycles:the lowest sub-cycle is …     

Contribution of storms to groundwater recharge in the semi‐arid region of Karnataka,India

This paper describes the application of environmental isotopes and injected tracer techniques in estimating the contribution of storms as well as annual precipitation to groundwater recharge and its circulation, in the semi‐arid region of Bagepalli, Kolar district, Karnataka. Environmental isotopes ²H, ¹⁸O and ³H were used to study the effect of storms on the hydrological system, and an isotope balance was used to compute the contribution of a storm component to the groundwater. Some of the groundwater samples collected during the post‐storm periods were highly depleted in stable isotope content with higher deuterium excess relative to groundwater from the pre‐storm periods. Significant variation in deuterium excess in groundwater from the same area, collected in two different periods, indicates the different origin of air masses. The estimated recharge component of a storm event of 600 mm to the groundwater was found to be in the range of 117–165 mm. There was no significant variation in environmental tritium content of post‐storm and pre‐storm groundwater, indicating the fast circulation of groundwater in the system. After completion of the environmental isotope work, an injected radiotracer ³H technique was applied to estimate the direct recharge of total precipitation to the groundwater. The estimated recharge to the groundwater is 33 mm of the 550 mm annual precipitation during 1992. Copyright © 2003 John Wiley & Sons, Ltd.     

Helicity as a Component of Filament Formation

In this paper we seek the origin of the axial component of the magnetic field in filaments by adapting theory to observations. A previous paper (Mackay, Gaizauskas, and van Ballegooijen, 2000) showed that surface flows acting on potential magnetic fields for 27 days – the maximum time between the emergence of magnetic flux and the formation of large filaments between the resulting activity complexes – cannot explain the chirality or inverse polarity nature of the observed filaments. We show that the inclusion of initial helicity, for which there is observational evidence, in the flux transport model results in sufficiently strong dextral fields of inverse polarity to account for the existence and length of an observed filament within the allotted time. The simulations even produce a large length of dextral chirality when just small amounts of helicity are included in the initial configuration. The modeling suggests that the axial field component in filaments can result from a combination of surface (flux transport) and sub-surface (helicity) effects acting together. Here surface effects convert the large-scale helicity emerging in active regions into a smaller-scale magnetic-field component parallel to the polarity inversion line so as to form a magnetic configuration suitable for a filament.