Collapse of primordial clouds — II. The role of dark matter

In this article we extend the study performed in our previous article of the collapse of primordial objects. We here analyse the behaviour of the physical parameters for clouds ranging from 10⁷ to 10¹⁵ M_⊙. We study the dynamical evolution of these clouds in two ways: as purely baryonic clouds and as clouds with non-baryonic dark matter included. We start the calculations at the beginning of the recombination era, following the evolution of the structure until the collapse (which we defined as the time when the density contrast of the baryonic matter is greater than 10⁴). We analyse the behaviour of several physical parameters of the clouds (e.g. the density contrast and the velocities of the baryonic matter and the dark matter) as a function of time and radial position in the cloud. In this study all physical processes that are relevant to the dynamical evolution of the primordial clouds, such as for example photon drag (due to the cosmic background radiation) and hydrogen molecular production, besides the expansion of the Universe, are included in the calculations. In particular we find that the clouds with dark matter collapse at higher redshift when we compare the results with the purely baryonic models. As a general result we find that the distribution of the non-baryonic dark matter is more concentrated than the baryonic one. It is important to stress that we do not take into account the putative virialization of the non-baryonic dark matter; we just follow the time and spatial evolution of the cloud, solving its hydrodynamical equations. We also studied the role of cooling–heating processes in the purely baryonic clouds.     

Non-tropical carbonate deposits on the modern New Zealand shelf

Extensive (ca. 50,000 km²) shallow-marine platforms (< 250 m) off northern (34°S) and southern (48°S) New Zealand, and more local areas of shelf between, are blanketed by skeletal carbonate sediments > 70% CaCO₃), despite proximity to a tectonically active plate margin. In these regions the terrigenous sediment supply is presently low, and growth of epibenthos is fostered by firm substrates (rock, gravels, shells, seaweeds) and the generally energetic nature and high nutrient levels of open-shelf waters. Rapid transition into adjacent terrigenous-dominated facies is characteristic. Irrespective of water depth, the carbonates are coarse-grained and fragmental; carbonate mud is rare. Calcite dominates over aragonite. High-Mg calcite, widespread off northern New Zealand, is rare in the south. Skeletal material is dominated by bryozoans and bivalve molluscs, with significant local contributions from foraminifers, barnacles, calcareous red algae and echinoderms. The name bryomol is suggested for this distinctive temperate-region skeletal carbonate facies, which can be usefully subdivided based on dominant zoarial growth forms of the bryozoan component, known to be habitat-related. Bioerosion is an important mechanism of skeletal fragmentation and degradation. Many grains, especially aragontic bivalves, are infested by endolithic borers and have low preservation potential. Ages of skeletal material in the surficial deposits range from more than 20,000 years B.P. to modern, which is consistent with both low rates of carbonate production and sediment accumulation, and the wide range in preservation state of grains. Some data suggest that the skeletal carbonates are dispersed and mixed mainly during infrequent movement of sand ribbons, sand waves and sand sheets driven by storm-assisted tidal flows. Tracts of modern, palimpsest and relict carbonates can occur in juxtaposition.

The facies characteristics of the New Zealand shelf carbonate deposits contrast significantly with those of the classical Bahaman-type carbonate model. However, they are similar to those reported from many other mid- to high-latitude carbonate shelves, and afford good analogues for most onland occurrences of New Zealand Cenozoic limestones.     

Preferred orientation of plagioclase—neutron diffraction and U-stage data

Pole figures of anorthosite mylonite (An 65) from San Juan Bautista, California, were determined with neutron diffraction using a 23 position sensitive detector. This novel technique enables us to deconvolute the complex diffraction spectrum of this triclinic mineral into fifteen separate peaks hkl which are measured simultaneously. All pole figures display strong preferred orientation with complicated triclinic distributions from which it appears that (001) poles are concentrated normal to the schistosity plane of the specimen. The triclinic mineral is well suited to discuss some fundamental issues of texture representation. If crystals are measured individually (e.g., on the U-stage), positive and negative ends of directions can be unequivocally identified and the whole sphere, rather than a hemisphere, is necessary to represent the distribution of positive axes. This is illustrated for a plagioclase-rich amphibolite from Ornö Huvud, Sweden.     

Geotomographic imaging in the study of mining induced seismicity

Geotomographic imaging is a technique which allows seismic waves to be used to gain information about the internal structure of rock masses, in a way conceptually similar to medical CAT scanning. Traditional approaches to the study of mining-induced seismic phenomena have concentrated on using passive monitoring methods. This paper gives an overview of the developments in the acquisition, processing and interpretation of geotomographic data and outlines how images can be used in conjunction with passive techniques to study mining-induced seismicity.Presented at the Fred Leighton Memorial Workshop on Mining Induced Seismicity, Montreal 1987.     

Tectonics of the Nazca-Antarctic plate boundary

We have constructed a new bathymetric chart of part of the Chile transform system, based mainly on an R/V “Endeavor” survey from 100°W to its intersection with the East Ridge of the Juan Fernandez microplate at 34°30′S, 109°15′W. A generally continuous lineated trend can be followed through the entire region, with the transform valley being relatively narrow and well-defined from 109°W to approximately 104°30′W. The fracture zone then widens to the east, with at least two probable en echelon offsets to the south at 104° and 102°W. Six new strike-slip mechanisms along the Chile Transform and one normal fault mechanism near the northern end of the Chile Rise, inverted together with other plate motion data from the eastern portion of the boundary, produce a new best fit Euler pole for the Nazca-Antarctic plate pair, providing tighter constraints on the relative plate motions.     

Derivation ofK-indices using magnetograms constructed from digital data

The purpose of this study is to investigate the feasibility of deriving the traditionalK index from magnetograms plotted from recorded digital data. Digital magnetic data from Ottawa Observatory are available for theX, Y, andZ components in the form of 1 min averaged values and spot values at selected sampling intervals of 1 sec or greater. It is found that the lowerK values tend to be biased downward by one level when a digitizing interval greater than 30 sec is used for construction of the artificial magnetograms. However, for digitizing intervals of 30 sec or less the reconstructed analogue plots are just as reliable as standard-run Ruska magnetograms for the derivation ofK.Contribution from the Earth Physics Branch No. 1132.     

Are polymers suitable rock analogs?

To evaluate if a polymer is suitable for analog modeling, it is essential to know the rheological properties of the material. Polymers used in analog modeling exhibit a complex rheological behavior; only part of which has been taken into account in most modeling studies. The mechanical behavior is strongly dependent on strain rate and temperature, and is characterized by specific dependencies of the storage and loss moduli, related to the elasticity and viscosity, on the deformation rate (frequency).We have measured the storage and loss moduli at a broad range of strain rates and strains, using an oscillatory parallel-disk rheometer. Investigated materials are polydimethylsiloxane (PDMS), mixtures of PDMS and BaSO₄ (filler), Rhodorsil Gomme and mixtures of Rhodorsil Gomme and plastilina, all commonly used in analog experiments.Our measurements show that the rheological properties of mixtures of plastilina and Rhodorsil Gomme depend on its deformation history. Therefore, these mixtures are problematic for analog modeling. For mixtures of PDMS and BaSO₄, the significance of the elastic component increases with increasing filler content, and accordingly, these mixtures have a limited application for modeling of viscous deformation. Pure PDMS and Rhodorsil Gomme exhibit Newtonian flow behavior at strain rates commonly used in analog modeling.     

The influence of matrix rheology and vorticity on fabric development of populations of rigid objects during plane strain deformation

The influence of vorticity and rheology of matrix material on the development of shape-preferred orientation (SPO) of populations of rigid objects was experimentally studied. Experiments in plane strain monoclinic flow were performed to model the fabric development of two populations of rectangular rigid objects with object aspect ratios (R_ob) 2 and 3. The density of the rigid object populations was 14% of the total area. Objects were dispersed in a Newtonian and a non-Newtonian, power law matrix material with a power law exponent n of 1.2. The kinematic vorticity number (W_n) of the plane strain monoclinic flow was 1, 0.8 and 0.6 with finite simple shear strain of 4.6, 3.0 and 0.9, respectively. In experiments with R_ob=3, the SPO is strongly influenced by W_n and the material properties of the matrix. Deformation of a power law matrix material and low W_n resulted in a stronger SPO than deformation of a linear viscous matrix and high W_n. Strain localization coupled with particle interaction plays a significant role in the development of a shape-preferred orientation. High strain simple shear zones separate trains of rigid objects that are surrounded by low strain zones with W_n lower than the bulk W_n. In fabrics involving populations of objects with R_ob=2, rheology of the matrix materials does not systematically influence the intensity of the SPO.     

Field-scale Variations in Plant and Grasshopper Communities: A GIS-based Assessment

GIS technology allowed us to examine species-specific occurrence and abundance patterns of important grassland herbivore species through the use of appropriate statistical methods and the superior spatial representation commonly available in existing GIS packages. The study was conducted on a 254 ha grassland area located 10 km south of Three Forks, Gallatin County, Montana, in the Agropyron spicatum province of the western steppe region of the U.S.A. From an ecological perspective, grasshopper species distribution and abundance patterns observed on a local, non-uniform landscape (2.6 km 2) were consistent with results found in other studies at the valley (≈1,400 km 2) and state-level (≈237,000 km 2) scales. Our observations at the local scale further demonstrate the importance of vegetation type and specific local stand physiognomies in structuring grasshopper populations. The application of results from studies conducted at various scales to the development of decision support tools for resource managers is also discussed.