An attenuation relationship based on Turkish strong motion data and iso-acceleration map of Turkey

This paper presents an attenuation relationship of peak ground acceleration (PGA) derived from Turkish strong motion data for rock, soil and soft soil sites and an iso-acceleration map of Turkey based on this relationship. For the purpose, among all the three-component accessible records, 221 records from 122 earthquakes that occurred in Turkey between 1976 and November 2003 were selected. The database was compiled for earthquakes with moment magnitudes (M_w) and PGA values ranging between 4.1 and 7.5, and 20 and 806 gal, and distances to epicenter considered in the database were between 5 and 100 km. From the regression analysis of the data, an attenuation equation of PGA considering rock, soil and soft soil conditions was developed. The PGA values predicted from the equation suggested in this study and those both from a few domestic equations and some imported equations were compared. In addition, an iso-acceleration map of Turkey was constructed using the suggested attenuation equation and considering both known active faults and epicenter locations of the earthquakes that have occurred in Turkey.     

Dérive à la surface de l'océan sous l'effet des vagues

We model the drift velocity near the ocean surface separating the motion induced by the local current, itself influenced by winds and waves, and the motion induced by the waves, which are generated by local and remote winds. Application to the drift of ‘tar balls’, following the sinking of the oil tanker Prestige-Nassau in November 2002, shows that waves contribute at least one third of the drift for pollutants floating 1 m below the surface, with a mean direction about 30° to the right of the wind-sea direction. Although not new, this result was previously obtained with specific models, whereas the formalism used here combines classical wave and circulation forecasting models. To cite this article: F. Ardhuin et al., C. R. Geoscience 336 (2004).     

Apports de la méthode sismique réflexion haute résolution à l'identification des structures profondes des formations tertiaires en Médoc (Gironde,France) : implications hydrogéologiques

Near Bordeaux (France), the Oligocene aquifer is a potential target for drinking water supply. A high-resolution seismic campaign and several exploration wells helped to clarify the geometry of this formation and, as a consequence, the Medoc Tertiary aquifers. The major information extracted from these new data is the existence of a soft deformation inducing two different deposit areas, showing different hydrogeological characteristics (thickness, type, hydraulic properties, etc.). The presence of an erosional gap area affecting the Oligocene formations lead us to propose a new image of groundwater flow in the area, in the context of a predicted intensive exploitation of this resource. To cite this article: F. Larroque, A. Dupuy, C. R. Geoscience 336 (2004).     

Low-frequency 3-D seismic survey of upper crustal magmatic intrusions in the northeastern Pannonian basin of Hungary

A specially designed 700-km² grid survey, deploying 1000 regularly distributed low-frequency seismic recording systems, successfully investigated one of the most complex geologic environments of the Pannonian basin. The wide-angle signals penetrated through over 1000 m of multi-phase igneous lithology and recognized, for the first time, the underlying enigmatic Permian to Early Triassic basement rocks. Tomographic inversion of the first arrival grid data resulted in determination of an accurate three-dimensional (3-D) velocity field, to a depth of 4 km. The anomalous changes of the spatial velocity data outline the regional extent of the Late Miocene magmatic intrusions, which are covered by over 2000 m of Mid-Miocene to Pleistocene clastics. Complex relationship was found between the surface potential data and the intrusive bodies. This multi-faceted geophysical data analysis established a functional technique for mapping a subsurface with intricate acoustic and structural complexity.     

Organic matter in a low productivity anoxic intraplatform basin in the Triassic Tethys

This paper presents isotopic, bulk geochemical and biomarker data measured on organic matter accumulated in a narrow extensional basin developed at the oceanward margin of the huge Triassic carbonate platform in the Alps–Appenines domain. The integration of isotope signatures, organic petrographical and biomarker evidence together with the composition of kerogen pyrolysates suggests immature organic matter predominantly of algal origin with a minor, but not negligible, higher plant derived and moderate bacterial contribution for the entire sequence. The mineral sources are dominated by platform-derived subtidal Dachstein limestone with a minor palaeosol input and a moderate contribution of autochtonous quartz. Nevertheless, parallel variations observed in the mineral content, as well as in the amount and the quality of the organic matter reflect variations in the palaeoenvironment. The increased humidity, existing in the period of the accumulation of the upper section of the sequence, led to the restriction of dolomitization. A slightly greater higher plant derived contribution, in this section, is evidenced by the composition of bitumen and the results on GC and GC/MS analyses on the non-aromatic hydrocarbon fraction of bitumen. Moreover, the climate-induced weathering enchanced the primary productivity and resulted in a pronounced increase in the TOC content. The average estimated value of the planktonic productivity is about three times higher for the calcite-rich sequence than the dolomite-rich one, being 44.2 and 15.3 tC_org/m²/Ma, respectively. The low to moderate planktonic productivity shows that anoxic conditions, observed for the entire succession, are a consequence of the stagnant water stratification rather than high planktonic productivity. Depth trends in the data measured on kerogens (HI, OI, δ¹³Corg values, composition of pyrolysate) together with the δ¹⁸O excursions and Δδ¹³C values appear to be controlled by sea-level fluctuations. Consistent with the high abundance of alkyltiophenes in kerogen pyrolysates, the high S_org/C ratios (ranging between 0.05 and 0.10) suggest the importance of natural sulfurization in the formation of the sulfur-rich type-II-S kerogen occurring in all of the samples.     

Relationship between solar radiation and the development and morphology of small cirque glaciers (Maladeta Mountain massif, Central Pyrenees, Spain)

Abstract Spatial and temporal variations in radiative fluxes influence glacier mass‐balance in mountain areas. The primary goal of this study was to assess differences in solar radiation on three glacial cirques located in the Maladeta Mountain massif (Central Spanish Pyrenees), and analyse their implications on glacier development and morphology. A quantitative approach is adopted to obtain the values of solar radiation (direct, diffuse and global radiation), combining several field data parameters (measured at 55 control‐points) with the solar radiation modelling package Ecosim. The data obtained confirm that the morphologies of the glacial bodies developed in the three cirques have a good correlation with the spatial variation on solar radiation inputs, favouring also the conservation (Aneto and Coronas cirques) or total vanishing (Llosás cirque) of the glacial remnants analysed here. The study shows how strongly in this Alpine‐Mediterranean context solar radiation — firstly as a function of latitude and time of year, and locally as a function of topographic slope, aspect and shadowing — controls the mass‐balance and the spatial distribution of melting in small glaciers, having an effect on the development of their morphologies.     

Histogram and variogram inference in the multigaussian model

Several iterative algorithms are proposed to improve the histogram and variogram inference in the framework of the multigaussian model. The starting point is the variogram obtained after a traditional normal score transform. The subsequent step consists in simulating many sets of gaussian values with this variogram at the data locations, so that the ranking of the original values is honored. The expected gaussian transformation and the expected variogram are computed by an averaging operation over the simulated datasets. The variogram model is then updated and the procedure is repeated until convergence. Such an iterative algorithm can adapt to the case of tied data and despike the histogram. Two additional issues are also examined, referred to the modeling of the empirical transformation function and to the optimal pair weighting when computing the sample variogram.     

An approach for quantifying geomorphological impacts for EIA of transportation infrastructures: a case study in northern Spain

A methodological proposal for the assessment of impacts due to linear infrastructures such as motorways, railways, etc. is presented. The approach proposed includes a series of specific issues to be addressed for each geomorphological feature analysed—both ‘static’ and ‘dynamic’—as well as a series of steps to be followed in the process.Geomorphic characteristics potentially affected were initially identified on the basis of a conceptual activities/impacts model that helps to single out geomorphic impacts related to environmental concerns for the area. The following issues were addressed for each individual impact: nature of potential effects; indicators that can be used to measure impacts; criteria of ‘geomorphologic performance’; procedure for measurement/prediction of changes; translation of geomorphologic impacts into significant terms from the viewpoint of human concerns; possible mitigation and/or compensation measures.The procedure has been applied to a case study corresponding to a new motorway in the Basque Country, northern Spain. Geomorphological impacts considered in this analysis included: (1) consumable resources; (2) sites of geomorphological interest; (3) land units with high potential for use, high productivity or value for conservation; (4) visual landscape; (5) slope instability processes. The procedure has been designed for implementation in a Geographic Information System (GIS) environment. Details are given on the application of the method to each individual impact analysed and results are presented in both numerical and map form.Impacts assessed were initially expressed by means of heterogeneous magnitudes, depending on the geomorphological feature considered. Those geomorphological impacts were then translated into significant terms and homogeneous magnitudes. Integration was carried out on the basis of impact values thus obtained. Final integrated results were also expressed in numerical and map form.The method proposed enables comparison of alternatives as well as ‘prediction’ and assessment of impacts in terms directly related to geomorphic characteristics. It also facilitates the expression of those impacts in terms that allow integration with other types of environmental impacts.