Wrench tectonics flip at oblique subduction. A model from New Zealand

In eastern North Island New Zealand, oblique subduction of the Pacific Plate beneath the Australian Plate is associated with strain partitioning. Dextral along-strike component of displacement occurred first at Early Miocene major faults within the eastern fore-arc domain. These faults were active from Early Miocene to Pliocene times. Since Pliocene times, most of the movement occurs at western faults such as the Wellington Fault. The latter joins the back-arc domain to the north. The jump of wrench faulting is related to the oblique opening of the back-arc domain. Both phenomena are impeded southwards by the Hikurangi oceanic plateau entering the subduction zone. To cite this article: J. Delteil et al., C. R. Geoscience 335 (2003).     

Pre-Caving, Drilling and Blasting in the Esmeralda Sector of the El Teniente Mine

El Teniente Mine has developed the method of panel caving as an innovative pre-conditioning caving alternative for traditional mining of sectors located in primary rock. In applying this method, caving speed and area incorporation are the most relevant parameters to establish a desired production level in a specified sector. This is the context in which continuous improvements to several design alternatives have been developed and applied to optimize mine caving. Mine caving, by drilling and blasting, results in a narrow base cut of ore columns not larger than the height of the caving galleries, which usually measure 3.6 m. These confined blasting operations require drilling parallel blastholes that extend from the floor to the roof of the caving gallery. Panel caving aims at mitigating subvertical field stress transmission to the lower levels of the caving gallery. This improves the stability and helps maintain the advancement of the caved zone at the caving level, with respect to the development, preparation and ore mining activities in the production level. This paper analyzes and evaluates different panel caving alternatives. The result is the identification of the most adequate panel caving alternative for conditions in the Esmeralda Mine given safety, technical, operational and economic considerations.     

Preliminary Rock-Slope-Susceptibility Assessment Using GIS and the SMR Classification

This paper aims to examine the impact of large-scale structuraladjustments (like the Greater Dhaka Flood Protection Project, GDFPP) on local living environment.It focuses the importance of environmental factors in flood hazard mitigation, and examines theenvironmental attitudes of the floodplain residents arising from the large-scale structural adjustments.Based on `perceived natural hazard research perspectives', this paper examines: (i) the reasons for persistentfloodplain occupation, and (ii) the importance of environmental factors in the choice, motivations and decision-makingof floodplain residents.This research used data collected from 300 households situated inthe eastern part of Dhaka. The face-to-face household survey data provided individuals' responses to a structuredquestionnaire on hazards and environment. Survey concerned urban floodplains, and looked fordata on housing, household characteristics, and residents' attitudes. Results of interview surveys wereused to: (i) explore the reasons of floodplain occupation, and (ii) residents' attitudes to tolerable levelof flood risk and willingness to accept environmental change resulting from the proposed structural embankments inthe eastern perimeter of Dhaka City, Bangladesh.Findings revealed that floodplain occupation (by theindividuals' decision-making) was a result of overall reaction to the Government's structuraladjustment policies that resulted from institutional, locational and socio-economic factors. The attitude survey results provided residents' perception to hazards and environment to be dependenton the socio-economic factors – but in a complex manner, many factors are interrelated.In addition to support for structural embankments, the study sample displayed a common concernand widespread environmental awareness. In terms of any `trade-off' between thebenefits (resources) from the embankments and costs (hazards) due to the detrimental impact on environment, the residents of Dhaka, despite some concern forsacrificing embankments for environment, tended to show a generalconsensus for embankments.     

Architecture of fault zones determined from outcrop, cores, 3-D seismic tomography and geostatistical modeling: example from the Albalá Granitic Pluton, SW Iberian Variscan Massif

The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.     

Validation of Landslide Susceptibility Maps; Examples and Applications from a Case Study in Northern Spain

A procedure for validating landslide susceptibility maps wasapplied in a study area in northern Spain and the results obtained compared. Validationwas used to carry out sensitivity analysis for individual variables and combinationsof variables. The validity of different map-making methods was tested, as well as theutility of different types of Favourability Functions. The results obtained show thatvalidation is essential to determine the predictive value of susceptibility maps. Italso helps to better select the most suitable function and significant variables, thus improving the efficiency of the mapping process. Validation based on a temporal strategy makes it possible to derive hazard maps from susceptibility maps.     

Strontium isotope evolution of Late Permian and Triassic seawater

The ⁸⁷Sr/⁸⁶Sr values based on brachiopods and conodonts define a nearly continuous record for the Late Permian and Triassic intervals. Minor gaps in measurements exist only for the uppermost Brahmanian, lower part of the Upper Olenekian, and Middle Norian, and only sparse data are available for the Late Permian. These 219 measurements include 67 brachiopods and 114 conodont samples from the Tethyan realm as well as 37 brachiopods and one conodont sample from the mid-European Middle Triassic Muschelkalk Sea. The Late Permian/Lower Triassic interval is characterized by a steep 1.3 × 10⁻³ rise, from 0.7070 at the base of the Dzhulfian to 0.7082 in the late Olenekian, a rate of change comparable to that in the Cenozoic. In the mid-Triassic (Anisian and Ladinian), the isotope values fall to 0.7075, followed again by a rise to 0.7081 in the Middle/Late Norian. The ⁸⁷Sr/⁸⁶Sr values decline again in the Late Norian (Sevatian) and Rhaetian to 0.7076.The sharp rise in the ⁸⁷Sr/⁸⁶Sr values during the Late Permian/Early Triassic was coincident with widespread clastic sedimentation. Because of the paucity of tectonic uplifts, the enhanced erosion may have been due to intermittent humid phases, during mainly an arid interval, coupled with the absence of a dense protective land plant cover following the mass extinction during the latest Permian. The apex of the ⁸⁷Sr/⁸⁶Sr curve at the Olenekian/Anisian boundary coincides with cessation of the large-scale clastic sedimentation and also marks the final recovery of land vegetation, as indicated by the renewed onset of coal formation in the Middle Triassic. The rising ⁸⁷Sr/⁸⁶Sr values from the Middle Carnian to the Late Norian coincide with the uplift and erosion of the Cimmeride-Indosinian orogens marking the closure of the Palaeotethys. The subsequent Rhaetian decline that continues into Jurassic (Pliensbachian/Toarcian boundary), on the other hand, coincides with the opening of the Vardar Ocean and its eastern continuation in the Izmir-Ankara Ophiolitic Belt.Samples from the Upper Muschelkalk are more radiogenic than the global trend. This may reflect separation of the basin from the open ocean. Due to strong meteoric influx from a large land mass in the north, the Germanic Basin became increasing brackish up section in the north and east, but because of the high evaporation rates, the salt content was not much reduced in the southern and central basin where a rich, but increasingly endemic, marine fauna survived.     

Impact of waves on the sea drag: measurements in the Baltic sea and a model interpretation

Measurements from the Baltic Sea and a wind-over-wave coupled model are used to study the wave impact on the sea drag. The study has been carried out for different wave conditions, namely a pure wind-sea, following-swell/ mixed sea and cross-swell/ mixed sea. Measurements reveal the fact that the sea drag is dependent on the sea-state. In stationary conditions and in the absence of severe cross-swell, swell reduces drag compared to wind-sea at the same wind speed. The cross-swell enhances the drag as compared to the following-swell case and the magnitude of the drag coefficient is increased with increasing the angle of swell propagation to the wind. It is shown that the agreement between the model results and measurements is good for pure wind-sea and stationary mixed-sea cases. Discrepancies occur at light winds, where most of the data represent pure swell conditions. During these pure swell conditions the data are characterized by a large variation of the drag coefficient. The variation is caused by mesoscale variability in the stress co-spectra, wind-cross-swell effects and nonstationarity in the wave and wind fields not represented in the model.     

Objective method for classifying air masses: an application to the analysis of Buenos Aires’ (Argentina) urban heat island intensity

Summary ?During recent years, numerous studies have examined the Buenos Aires urban climate, but the relationship between large-scale weather conditions and the Buenos Aires urban heat island (UHI) intensity has not been studied. The goal of this paper is to apply an objective synoptic climatological method to identify homogeneous air masses or weather types affecting Buenos Aires during winter, and to relate the results to the UHI intensity. A K-means clustering method was used to define six different air masses considering the 03:00, 09:00, 15:00 and 21:00 LT surface observations of dry bulb temperature, dew point, cloud cover, atmospheric pressure and wind direction and velocity at Ezeiza, the most rural meteorological station of the Buenos Aires metropolitan area (Fig. 1). Results show that the mean UHI intensity is at its maximum (2.8 °C) a few hours before sunrise when conditions are dominated by cold air masses associated with cold-core anticyclones, weak winds and low cloud cover. Inverse heat islands are found during the afternoon for all air masses indicating that surface processes are not dominant at that time. The relatively infrequent and warmest air mass is the only one that presents a mean negative urban-rural temperature difference (−0.1 °C) during the afternoon with the smallest diurnal cycle of the UHI intensity probably due to the prevailing high humidity and cloudy sky conditions. The paper provides an insight into the Buenos Aires urban–rural temperature difference under a variety of winter weather types and results could be useful to improve local daily temperature forecasts for the metropolitan area of Buenos Aires on the basis of the routine forecasts of weather types. Received October 24, 2001; revised June 12, 2002; accepted October 10, 2002     

Effects of early season defoliation ofAnthyllis cytisoides(a Mediterranean browse species) on further herbivore attack

To determine if defoliation of a woody plant affects foraging by folivorous insects, we examined the infection rate (number of leaves damaged per total number of leaves sampled on marked stems) ofAnthyllis cytisoidesunder three experimental treatments: 10, 50 and 90% plant defoliation. Observations were made for three age classes, established by trunk base perimeter (equal to or lower than 11 cm, between 11 and 20 cm, larger than 20 cm). Plants respond positively to artificial defoliation by increasing total vegetative length of the stem and total inflorescence length. This response is most evident in young individuals.Response to herbivory was measured as overall infection rate and also as infection rate by different feeding guilds—chewing, mining, or sucking insects. We found that increased defoliation elicited increased resistance of leaves to insect attack. This was particularly evident in young plants. Different insect guilds respond in different ways. Attack by chewing insects declines with defoliation for all plant age classes; only sucking insects which feed on the oldest plants reduce feeding rate with plant defoliation. Finally, mining insects present the opposite trend in young and senescent plants.