Numerical Study Of The Impact Of Coherent Structures On Vertical Transfers In The Atmospheric Boundary Layer

In two preceding papers, coherent structures of theatmospheric boundary layer (ABL), such as rollvortices or cells, were investigated through radar andaircraft observations collected during the TRAC-93(Turbulence Radar Aircraft Cells) experiment held inFrance in June 1993. The analysis of this experimentaldata set provided information on the spatialcharacteristics of these organisations (length scale,orientation, type ... ), their temporal and verticalevolution, and their relation with the dynamic andthermodynamic conditions of the ABL. For the thirdpaper in this series, a large eddy simulation model is used to examine the impact of thecoherent structures on the ABL vertical fluxes. Theanalysis of the simulated horizontal fields is madewith two-dimensional auto and cross-correlationsapplied on different pertinent ABL variables. Theresults emphasise a directional anisotropy of theseorganised fields throughout the ABL, much morepronounced in the heat flux fields, not only at thelength scale of organisations but also at theturbulence scales. This finding has an importantconsequence for traditional ABL flux measurementsbased on the hypothesis of isotropic and homogeneousturbulence. It can explain part of the underestimationof the surface fluxes often mentioned in theliterature. This approach makes it possible tomodify the concept of diffusion time (in chemicalmodelling) and could also lead to revised ABLparameterisations in Range Scale models.     

韧性剪切带位移量统计方法评述——以西秦岭元家坪韧性剪切带为例

韧性剪切带位移量的计算方法较多 ,每一种方法都有它适用的范围 ,应根据区域地质特点选择适宜的方法进行计算。在对元家坪韧性剪切带位移量的计算中 ,对其方法进行了比较 ,认为应用多种方法计算及验证 ,能得出较准确的位移量。     

韧性剪切带位移量统计方法评述——以西秦岭元家坪韧性剪切带为例

韧性剪切带位移量的计算方法较多 ,每一种方法都有它适用的范围 ,应根据区域地质特点选择适宜的方法进行计算。在对元家坪韧性剪切带位移量的计算中 ,对其方法进行了比较 ,认为应用多种方法计算及验证 ,能得出较准确的位移量。     

颅颌面外科与三维重建技术

目的 探讨电子束ＣＴ三维重建技术在颅颌面外科的适应症和应用价值。方法 采用美国Ｉｍａｔｒｏｎ公司的电子束ＣＴ（ｅｌｅｃｔｒｏｎ ｂｅａｍ ＣＴ,以下简称ＥＢＣＴ）Ｃ－１５０,对７６例严重颅颌面病人实行薄层ＣＴ容积扫描。将所获ＣＴ 象经数字接口传至加拿大ＩＳＧ公司生产的Ａｌｌｅｇｒｏ工作站进行三维重建。结果 ＥＢＣＴ成像技术能立体的、详尽和精确的显示机体组织三维解剖结构极其相互关系。其再现畸形或病体     

西宁和贵德盆地新生代沉积物重矿物变化对构造活动的响应

位于青藏高原东北缘的西宁、贵德盆地的新生代沉积序列较完整的记录了盆地周围物源区构造变形过程。重矿物是碎屑物质的重要组成部分,是最直观、有效揭示源区母岩、构造-沉积过程的重要手段。通过重矿物的系统分析,结合沉积-构造变形,揭示出始新世-上新世末西宁-贵得盆地及其源区经历了几个构造活动阶段:古新世-始新世早期的隆升阶段、始新世中期-渐新世晚期的构造稳定阶段、渐新世末-中新世初的构造隆升阶段、中中新世构造稳定阶段和晚中新世以来的强烈隆升阶段。并结合特征矿物（绿泥石）及古水流分析,推断古近纪西宁-贵德盆地是东昆仑山前一个统一盆地。中新世早期青藏高原的扩张导致了拉脊山开始隆起,使原型盆地解体;约8.5 Ma以来拉脊山强烈隆升,两侧盆地逐渐转变为山间盆地。这为正确理解青藏高原东北缘盆山格局的形成和演化提供了重要依据。     

Optimal Stopping Location of a High Speed Train using GIS and Multicriteria Decision‐making

This article develops a methodology using a Geographical Information System (GIS) to evaluate the best location to stop a high speed passenger train when faced with an undesired event. The proposed method is based on multicriteria decision‐making where different stretches of line which could be chosen as the stopping point are ranked depending on the characteristics of the line, the surrounding area and its accessibility for equipment. The method was integrated into the GIS to develop an expert support system for decision makers faced with different kinds of undesired events. It has been applied to a case study on the high speed line between Valladolid and Madrid (Spain). The proposed method is new and has not previously been applied to high speed railway networks and could be adapted to other case studies. The speed of the algorithm provides an almost instantaneous reply within seconds of an emergency situation occurring. The method can therefore be part of an overall support system for decision making in undesired rail events.     

Experimental study of the atmospheric marine boundary layer from in-situ aircraft measurements (TOSCANE-T Campaign): Variability of boundary conditions and eddy flux parameterization

The need for a thorough knowledge of boundary conditions over the vast oceanic surfaces makes remote sensing appear as the most suitable tool for future development. Remote sensing techniques require calibration data and consequently in-situ experiments to yield those data. Over the sea, aircraft seem to be the most convenient means of conducting validation experiments because they allow exploration of a large range of scales (from local measurements to measurements of pixel scale). This paper reports on some in-situ atmospheric aircraft measurements that were conducted as part of the TOSCANE-T experiment organized by the European Space Agency to calibrate the scatterometer for launch on ERS-1 in the early 1990's for global ocean wind measurement.The data analysed are the thermodynamic and turbulent variables measured by an instrumented aircraft, the Hurel Dubois, flying at a constant level of 50 m over the sea surface. Special attention was drawn to the variability of the boundary conditions within areas of 25 × 30 km. In fact, the two-dimensional fields of fluxes and thermodynamic parameters were inhomogeneous with some rather strong wind distortion.The eddy fluxes were parameterized with the aid of bulk aerodynamic formulations at a basic scale of 30 km samples, which corresponds to the aircraft flux computation legs. The bulk aerodynamic coefficients for momentum and heat were found to remain independent of windspeed (for wind velocities less than 12 m/s). Fluxes and thermodynamic parameters were also investigated at two other scales: the integration scale was either reduced to small areas of which size always remains larger than several characteristic lengths of turbulent transfer, or extended to a large area of 25 × 30km. The results of the bulk aerodynamic relationships appeared to be scale invariant, which would therefore justify the application of average values, within the range of scales under study.     

Integrating variations in the soil chloride profile and evaporativity for in-situ estimation of evaporation in arid zones: an application in south-eastern Morocco

In arid regions, knowledge of the evaporation rate from the water table is essential for appropriate management of scarce resources and to prevent land degradation. Soil chloride profiles in the unsaturated zone of a bare soil in an arid area of south-eastern Morocco were used to assess the evaporation flux, using chloride inventories in conjunction with evaporative demand. Moisture fluxes were calculated from measured chloride concentrations on the basis of a steady-state flow model. The chloride profiles displayed large variations in concentrations and had (1) low chloride concentrations near the soil surface, (2) maximum chloride concentrations at depths of 11–14 cm beneath the soil surface, respectively in July and February, and (3) gradually decreasing chloride concentrations while depth increased below these peaks. Evaporative demands were found to be inversely proportional to the depth of evaporation fronts and proportional to evaporation fluxes. In addition, the evaporation along the profiles seems to be controlled by the soil composition and texture. The investigation of chloride profiles in February and July enabled the determination of a value for annual evaporation (～30 mm), which is in good agreement with the value estimated by the Allison-Barnes type model (～32 mm).     

Hydroelastic response of a very large floating structure over a variable bottom topography

An influence of sea-bottom topography on the hydroelastic response of a Very Large Floating Structure (VLFS) is considered. When the floating structure is constructed near the shore, the sea-bottom topographical effect should be considered. In this study, the effect of sea-bottom topography is investigated for four different bottom cases. To calculate the sea-bottom effects rigorously, the finite-element method based on the variational formulation is used in the fluid domain. The pontoon-type floating structure is modeled as the Kirchhoff plate. The mode superposition method is adopted for the hydroelastic behavior of the floating structure.     

An analysis of second-order wave forces on floating bodies by using a higher-order boundary element method

The wave diffraction and radiation problem is studied numerically by using a higher-order boundary element method. The convergence of the higher-order boundary element method is tested systematically for bodies of different shapes. For the second-order force, particular attention is paid to the contribution of the second-order potential, following the line of Molin's approach. For numerical evaluation, the free surface is divided into three subregions; inner, intermediate and outer ones. In the inner region, the integral is evaluated numerically by using higher-order boundary elements. In the intermediate region, semi-analytic form is constructed with the help of eigen functions. In the outer domain, the analytic solution is available. This subdivision scheme reduces the numerical burden remarkably.