OZONE VALLEY OVER TIBETAN PLATEAU*

We analysed the atmospheric total column ozone temporal and spatial distributions,by using the USA Nimbus Satellite TOMS data provided by the Goddard Space Flight Center of NASA,USA.We ploted the monthly mean total column ozone distributions over China by the averaged data from 1979 to 1991,and found that the atmospheric total column ozone contours were parallel to latitudes in winter and spring. However, from June, the lower center of atmospheric column ozone, called "ozone valley",was formed gradually over the Tibetan Plateau, as shown in Fig.     

ANALYSIS OF A CASE OF EAST ASIA COASTAL CYCLOGENESIS*

The evolution of an explosive cyclone off the East Asia coast in March 1979 is described.A shortwave trough in the southern branch of upper-level westerlies initiated the incipient cyclone.Later,a polar trough in the north amplified and became in phase with the southern shortwave to form a major trough.This major trough was responsible for the rapid intensification of the surface cyclone.In the early development stage,warm and moist air was transported northward to the developing area by a strong low-level jet.The ageostrophic wind associated with the low-level jet contributed to the frontogenesis,creating a favorable low-level environment for the rapid deepening.A low-level positive potential vorticity anomaly was created prior to the onset of rapid deepening.It was a result of frontal cloud condensation.The cyclone intensified rapidly when stratospheric air with high potential vorticity penetrated to the mid-troposphere.The rapid deepening took place at a location under the left-exit region of an amplifying jet streak behind the major trough and the right-entrance region of another anticyclonically-curved subtropical jet streak in a quasi-stationary ridge overJapan.Due to the blocking effect of the Tibetan Plateau,two shortwave disturbances were observed in the upper-level westerlies on the north and south sides of the Plateau.The southern disturbance initiated the incipient surface cyclone,while the amplifying northern disturbance was responsible for the rapid deepening.Thus,the evolution of the explosive cyclone in this case can be regarded as consecutive Petterssen's "type-B" cyclogenesis in two separate stages.     

Sediment budget-based estimates of trace metal inputs to a Chesapeake estuary

This article evaluates whether a sediment budget for the South River, Maryland, can be coupled with metals data from sediment cores to identify and quantify sources of historic metal inputs to marsh and subtidal sediments along the estuary. Metal inputs to estuarine marsh sediments come from fluvial runoff and atmospheric deposition. Metal inputs to subtidal sediments come from atmospheric deposition, fluvial runoff, coastal erosion, and estuarine waters. The metals budget for the estuary indicates that metal inputs from coastal erosion have remained relatively constant since 1840. Historical variations in metal contents of marsh sediments have probably resulted primarily from increasing atmospheric deposition in this century, but prior to 1900 may reflect changing fluvial sources, atmospheric inputs, or factors not quantified by the budget. Residual Pb, Cu, and Zn in the marsh sediments not accounted for by fluvial inputs was low to moderate in 1840, decreased to near zero circa 1910, and by 1987 had increased to levels that were one to ten times greater than those of 1840. Sources of variability in subtidal cores could not be clearly discerned because of geochemical fluxes, turbulent mixing, and bioturbation within the cores. The sediment-metal budgeting approach appears to be a viable method for delineating metal sources in small, relatively simple estuarine systems like the South River and in systems where recent deposition (for example, prograding marshes) prevents use of deep core analysis to identify background levels of metal. In larger systems or systems with more variable sources of sediment and metal input, however, assumptions and measurement errors in the metal budgeting approach suggest that deep core analysis and normalization techniques are probably preferable for identifying anthropogenic impacts.Field and laboratory research conducted at the Department of Geography, University of Maryland, College Park, Maryland, 20742, USAField and laboratory research conducted at the Marine and Estuarine Environmental Science Program, University of Maryland, College Park, Maryland, 20742, USA     

Adsorption of fluoride on goethite surfaces-implications on dental epidemiology

Fluoride ion interaction with synthetically prepared goethite has been investigated over a range of pH values (4–9) and F^– concentrations (10^–3–10^–5 M). The amount of F^– retained by goethite suspensions was found to be a function of pH, media ionic strength, F^– concentration, and goethite concentration. The lowest ionic strength (0.001 M KNO₃) gave the highest adsorption medium. Uptake was minimal at pH >7 and increased with decreasing pH. Thermodynamic properties for fluoride adsorption at 298 K and 323 K were investigated. The isosteric heat of adsorption (H _r) was calculated and the heterogeneity and homogeneity of the surface examined for goethite. In view of the importance of fluoride in dental health, the interaction of fluoride on goethite in the physical environment has important implications on dental epidemiology.     

Interpolation by regularized spline with tension: I. Theory and implementation

Bivariate and trivariate functions for interpolation from scattered data are derived. They are constructed by explicit minimization of a general smoothness functional, and they include a tension parameter that controls the character of the interpolation function (e.g., for bivariate case the surface can be tuned from a membrane to a thin steel plate), Tension can be applied also in a chosen direction, for modeling of phenomena with a simple type of anisotropy. The functions have regular derivatives of all orders everywhere. This makes them suitable for analysis of surface geometry and for direct application in models where derivatives are necessary. For processing of large datasets (thousands of data points), which are now common in geosciences, a segmentation algorithm with a flexible size of overlapping neighborhood is presented. Simple examples demonstrating flexibility and accuracy of the functions are presented.On leave from the Department of Physical Geography and Cartography, Comenius University, Mlynská dolina, Bratislava, Czechoslovakia.On leave from the Institute of Physics, Dúbravská cesta 9, Bratislava, Czechoslovakia.     

相律的应用:蒸发结晶过程自由度

在连续原理和浓度限制条件的基础上,分析了卤水蒸发过程的自由度,提出了“蒸发结晶过程自由度”这一概念。发现蒸发结晶过程自由度在整个过程中不是1便是0,在1和0之间交替变化,与选择的组分数和析出固相数目无关。蒸发结晶过程自由度为1,物理意义是在不引起新相产生旧相不消失的前提下过程连续地变化(水分的连续蒸失),几何意义是指在适当的坐标系中的一条线,一条直线或曲线;0的物理意义是指新相的产生和旧相的即将消失或者前一段的连续变化过渡到后一段的连续变化,几何意义是指一点,两蒸发阶段的交点或者过程的终点。简单地讨论了过程的单向性和连续件。     

江西省安福地区地热水化学特征研究

为研究江西安福地区水文地球化学特征及控制因素, 本文采集了15组样品, 采用水化学、同位素分析等方法进行研究。结果表明: 研究区地热水以Na-HCO3型水为主, 地下水以HCO3-Na·Ca型为主, 地表水由西南向东北从HCO3-Na·Ca向HCO3-Ca型水演化。水化学组分演化过程主要受岩石风化作用控制, 地层封闭性较差, 水中的Na+、HCO– 3、Sr2+来源于硅酸岩风化溶解。由稳定同位素特征可知, 研究区地热水补给来源为大气降水。研究区热储温度为49.8~101.4 ℃, 地热水循环深度为1 502.6~1 513.6 m。热水在沿断裂带上升过程中与浅层冷水发生混合, 其混合比例为76.1%~87.5%。研究成果为安福地区水循环演化提供依据, 有利于地热资源的合理开采与保护。     

利用主成分分析改善土地利用变化的遥感监测精度——以珠江三角洲城市用地扩张为例

近年来,珠江三角洲由于经济的快速发展,城市用地急剧增加,利用多时相的遥感图,可以定量地监测这种城市化的现象。但理,由一般的遥感动态监测方法所得的结果往往夸大变化的程度,以及获得一些不合理的结论．该文提出主成分分析的方法来改善遥感动态监测的精度。将该方法应用应用于珠江三角洲发展最快的东莞市,获得了较满意的结果。     

北京云蒙山地区花岗岩穹隆及伸展构造的探讨

北京云蒙山花岗岩为一中生代侵入的花岗岩穹隆,花岗岩穹隆的叶理普遍发育,叶理轨迹基本平行于穹隆的外部边界,并显示出从核部到边部逐渐增强,东南侧明显强于西北侧的特点。变形构造研究显示,花岗岩穹隆的边部及围岩中普遍存在不同层次及不同运动方向的伸展构造。东南侧以具河防口－水峪伸展型韧性剪切带为特征,剪切运动标志显示为从ＮＷ－ＳＥ的正剪切运动,有限应变分析估算其剪切位移量在１０ｋｍ以上,剪切带上部被河防口正     

Research on temporal and spatial distribution, evolutionary character and mechanism of crustal deformation field before and after the Tangshan earthquake

Ｒｅｓｅａｒｃｈｏｎｔｅｍｐｏｒａｌａｎｄｓｐａｔｉａｌｄｉｓｔｒｉｂｕ┐ｔｉｏｎ,ｅｖｏｌｕｔｉｏｎａｒｙｃｈａｒａｃｔｅｒａｎｄｍｅｃｈａｎｉｓｍｏｆｃｒｕｓｔａｌｄｅｆｏｒｍａｔｉｏｎｆｉｅｌｄｂｅｆｏｒｅａｎｄａｆｔｅｒｔｈｅＴａｎｇｓｈａｎ...