基于组合楔形体原理的采动坡体稳定性研究

地下采煤通常会引起地表严重开裂,甚至发生滑坡、崩塌等地质灾害,采动坡体的稳定性研究一直是工程实际关心的问题。本文以贵州省都匀市煤洞坡采动坡体为例,在斜坡破坏机制分析基础上,采用组合楔形块体原理构建了采动坡体稳定性系数计算方程,并从实验、经验类比、采空率等方面对采动坡体的强度指标进行了综合取值,计算了采动坡体在天然、饱水及裂隙水作用下的安全系数。结果表明:煤洞坡山体是处于稳定状态的,这与坡体上的裂缝位移监测成果是相符的。但在长时间降雨或暴雨情况下,煤洞坡山体稳定性就会逐渐变差,甚至发生滑动; 坡体稳定性安全系数随内摩擦角的降低而降低,随裂隙水充水高度的增加而降低; 一旦后缘块体挤压前缘块体时,就会存在一个安全系数急剧降低的阀值。从裂缝水柱高度与降雨渗入裂缝的雨水量关系出发,建立了裂缝水柱高与降雨量之间关系式。经计算当降雨量(短时间内)超过192mm,斜坡就会失稳。     

地形地貌对地震波放大效应数值模拟研究

采用FLAC3D 软件进行大量数值模拟,研究了地形地貌对地震波放大效应规律。结果表明:对于单面坡模型,斜坡较低时,坡体对天然地震波和简谐波的峰值加速度在竖直向和顺坡面向产生线性放大效应。斜坡较高时,若坡角低,两种波形的加速度等值线近似平行于坡面,天然地震波坡顶正下方极值性不明显,但随坡角增大而明显,坡面正下方可见若干条与坡面相平行具节律性的极小值条带,随坡角增大向一条极值带转化,简谐波在高低坡脚时坡顶面正下方区域内都出现等间距相间分布具节律性的极值条带,坡面正下方的极值带状性不如天然地震波明显,随坡角增大而消失; 若坡角高,两波形加速度放大系数顺坡面呈相间的极值圈分布。双面坡坡顶宽度越小,山脊越单薄,加速度放大效应越强烈,随坡顶宽度增大,坡肩加速度放大系数趋于稳定,双面坡对加速度放大效应强于单面坡。对加速度放大效应,多峰形双峰形单峰形,坡顶越不规则,加速度放大效应越强烈。V形河谷坡面上半部分加速度放大效应要强于U形河谷,U形河谷的谷底中部对地震波动力响应要强于V形谷。坡面局部不规则性只影响到坡面局部范围内的峰值加速度分布,坡高、坡角、坡顶几何特征为整个峰值加速度分布的控制因素。     

传感光纤-砂土界面力学性质的试验研究

近年来分布式光纤感测技术在岩土与地质工程领域的应用研究已成为一个研究热点,但工程实践表明,埋入式传感光纤与被测岩土体之间的变形协调性会对监测结果产生显著的影响,该问题一直制约着光纤感测技术在工程监测中的推广。本文通过一系列室内拉拔试验,对比了3种预埋于砂土中的单模光纤在不同上覆压力的作用下的拉拔力-拉拔位移曲线,并建立了一个用于描述光纤-砂土界面力学性质的三段式的拉拔模型,分析峰值拉拔力、残余拉拔力、有效拉拔位移和残余拉拔位移4个参数在不同上覆压力作用下的变化情况。分析结果揭示传感光纤-砂土界面的力学特性和应力传递规律,为分布式光纤传感技术在岩土体变形监测中的应用,尤其在变形监测光纤的选用标准方面,提供了参考依据。     

粗粒土大三轴试验研究综述

自然界中广泛分布粗粒土,其具有压实密度大、良好透水性、抗剪强度高、沉降变形小、不易产生地震液化等优良的工程特性,已被广泛运用于土石坝工程建设中。本文在阅读大量参考文献的基础上概括和总结了粗粒土大三轴试验研究进展情况,包括抗剪强度、变形特性、应力-应变关系特性、试验中的若干问题,并结合已有认识,提出了笔者一些自己的思考,指出了今后关于粗粒土的研究方向。     

135~130 Ma: 大别山第二次“去根”时间？

大别杂岩主要由早白垩世侵入岩和三叠纪变质岩组成。它的四周是四条区域性韧性剪切带:郯城—庐江断裂,商城—麻城断裂,襄樊—广济断裂和晓天—磨子潭断裂。其中,晓天—磨子潭断裂和襄樊—广济断裂在早白垩世具有相反的走滑剪切方向:北侧的边界断裂(晓天—磨子潭断裂)是一个左行剪切断裂,而南侧的边界断裂(襄樊—广济断裂)是一个右行剪切断裂。在大别杂岩内部,早白垩世低角度剪切面理的倾伏向以SE向或NW向为主。这些晚期剪切面理上的拉伸线理的倾伏向同样为SE或NW向。大别杂岩总体具有朝SE向挤出和顶部相对朝NW向剪切的构造特征。这些表明晚中生代是该杂岩演化的重要阶段。该杂岩的边界断裂和内部构造特征指示其晚期抬升是沿造山带方向(SE—NW)以低角度方式进行的。这一过程直接导致高压-超高压变质岩和同构造岩浆岩被抬升至近地表。同时,年代学研究表明:大别杂岩(扬子板块东北缘地壳)在晚侏罗世—早白垩世经历大规模混合岩化的时间为145~135 Ma,同造山岩浆作用的时间为145~135 Ma,后造山火山-岩浆活动的时间为135~120 Ma。因此,该杂岩中三叠纪高压-超高压变质岩所记录的早白垩世抬升过程不是印支事件的后续,而是燕山期陆内造山及随后发生的伸展过程有关。尽管这一陆内造山事件的起始时间至今仍不确定,但大别山未变形岩体(130~120 Ma)的年代学研究结果和我们新测得的同构造伟晶岩脉的锆石U-Pb年龄(130 Ma)为早白垩地壳变形提供了良好的上限制约。这样,大别山经历了三叠纪碰撞造山和伸展,晚侏罗世—早白垩世陆内造山-伸展二次过程。     

四川省蓬溪县安置点地质灾害危险性评估

通过对天福镇三关村安置点建设用地的地形地貌、地层岩性、地质构造与区域稳定性、水文地质条件等工程地质条件的分析,对场地进行了危险性现状评估、预测评估及综合评估,并提出了灾害防治建议。     

Precise and Accurate In Situ Determination of Lead Isotope Ratios in NIST,USGS, MPI‐DING and CGSG Glass Reference Materials using Femtosecond Laser Ablation MC‐ICP‐MS

Lead isotope ratio data were obtained with good precision and accuracy using a 266 nm femtosecond laser ablation (fLA) system connected to a multi‐collector ICP‐MS (MC‐ICP‐MS) and through careful control of analytical procedures. The mass fractionation coefficient induced by 266 nm femtosecond laser ablation was approximately 28% lower than that by 193 nm excimer laser ablation (eLA) with helium carrier gas. The exponential law correction method for Tl normalisation with optimum adjusted Tl ratio was utilised to obtain Pb isotopic data with good precision and accuracy. The Pb isotopic ratios of the glass reference materials NIST SRM 610, 612, 614; USGS BHVO‐2G, BCR‐2G, GSD‐1G, BIR‐1G; and MPI‐DING GOR132‐G, KL2‐G, T1‐G, StHs60/80‐G, ATHO‐G and ML3B‐G were determined using fLA‐MC‐ICP‐MS. The measured Pb isotopic ratios were in good agreement with the reference or published values within 2s measurement uncertainties. We also present the first high‐precision Pb isotopic data for GSE‐1G, GSC‐1G, GSA‐1G and CGSG‐1, CGSG‐2, CGSG‐4 and CGSG‐5 glass reference materials obtained using the femtosecond laser ablation MC‐ICP‐MS analysis technique.     

国外关键矿产战略研究进展及其启示

近年来,世界各国都将经济发展的重心向战略性新兴产业转移,为保障战略性新兴产业的发展而引发的资源安全保障问题随之而来。一些研究机构和组织纷纷开展关键矿产研究,厘定了关键矿产清单,并提出有针对性的保障措施。然而,目前国内对于关键矿产的研究才刚刚起步,对新兴产业所需矿产的研究偏少,关键矿产定量化研究的方法和指标体系总体以跟踪国外研究为主。系统地剖析了国外主要研究机构的关键矿产评价理论、模型和指标体系,总结了国外关键矿产的基本特征,并结合国内实际提出了加强部门协作、打通产业数据链、开展中国关键矿产评价理论和模型的研究、提高关键矿产供应风险治理的研究等对策建议。     

Deposition and mobilization of functionalized multiwall carbon nanotubes in saturated porous media: effect of grain size,flow velocity and solution chemistry

Carbon nanotubes (CNTs) are widely manufactured nanoparticles which are utilized in a number of consumer products, such as sporting goods, electronics and biomedical applications. Due to their accelerating production and use, CNTs constitute a potential environmental risk if they are released to soil and groundwater systems. It is, therefore, essential to improve the current understanding of environmental fate and transport of CNTs. The current study systematically investigated the effect of solution chemistry (pH and ionic strength) and physical conditions (collector grain size and flow rate) on the deposition and mobilization of functionalized multiwall carbon nanotubes (MWCNTs) using a series of column experiments under fully saturated conditions. A one-dimensional convection–dispersion model including collector efficiency for cylindrical nanoparticles was used to simulate the transport of MWCNTs in porous media. It was observed that an increase in pH resulted in increased mobility of MWCNTs. However, the transport of MWCNTs was strongly dependent on ionic strength of the background solution and a critical deposition concentration was observed between 3 and 4 mM NaCl concentration, with more than 99 % filtration of MWCNTs at 4 mM. The finer sand grains were able to filter a significant amount of MWCNTs (15 % more than coarse sand) from the inflow solution; this was likely caused by grain-to-grain straining mechanisms in the finer sand. A decrease in pore water velocity also led to more deposition of MWCNTs due to lowering of the kinetic energy of the particles. The results from this study indicated that a weak secondary minimum existed under unfavorable conditions for deposition, but the particles were trapped at both primary and secondary minimum.     

Geochemistry,and zircon U–Pb and molybdenite Re–Os geochronology of Jilongshan Cu–Au deposit,southeastern Hubei Province,China

The Jilongshan skarn Cu–Au deposit is located at the Jiurui ore cluster region in the southwestern part of the Middle–Lower Yangtze River valley metallogenic belt. The region is characterized by NW‐, NNW‐ and EW‐trending faults and the mineralization occurs at the contact of lower Triassic carbonate rocks and Jurassic granodiorite porphyry intrusions. The intrusives are characterized by SiO₂, K₂O, and Na₂O concentrations ranging from 61.66 to 67.8 wt.%, 3.29 to 5.65 wt.%, and 2.83 to 3.9 wt.%, respectively. Their A/CNK (A/CNK = n(Al₂O₃)/[n(CaO) + n(Na₂O) + n(K₂O)]) ratio, δEu, and δCe vary from 0.77 to 1.17, 0.86 to 1, and 0.88 to 0.96, respectively. The rocks show enrichment in light rare earth elements ((La/Yb)_N = 7.61–12.94) and large ion lithophile elements (LILE), and depletion in high field strength elements (HFSE), such as Zr, Ti. They also display a peraluminous, high‐K calc‐alkaline signature typical of intrusives associated with skarn and porphyry Cu–Au–Mo polymetallic deposits. Laser ablation inductively coupled plasma spectrometry (LA‐ICP‐MS) zircon U–Pb age indicates that the granodiorite porphyry formed at 151.75 ± 0.70 Ma. A few inherited zircons with older ages (677 ± 10 Ma, 848 ± 11 Ma, 2645 ± 38 Ma, and 3411 ± 36 Ma) suggest the existence of an Archaean basement beneath the Middle–Lower Yangtze River region. The temperature of crystallization of the porphyry estimated from zircon thermometer ranges from 744.3 °C to 751.5 °C, and 634.04 °C to 823.8 °C. Molybdenite Re–Os dating shows that the Jilongshan deposit formed at 150.79 ± 0.82 Ma. The metallogeny and magmatism are correlated to mantle–crust interaction, associated with the subduction of the Pacific Plate from the east. Copyright © 2013 John Wiley & Sons, Ltd.