一株海洋微藻的分离鉴定及其产油条件优化

自青岛近岸海水中分离到一株硅藻,经形态学和分子生物学鉴定,表明该藻与小头菱形藻(Nitzschia microcephala)最为相近,18SrDNA相似性99%以上。研究以f/2培养基为基础,对该藻的生长和油脂积累条件进行探析,表明其在pH=6~8时具有较高的生长速率,最大可达到0.01d-1,油脂含量随pH的升高而降低;添加SiO2-3可以抑制菱形藻的生长和油脂积累;高浓度的Fe3+能促进菱形藻的生长;在Zn2+浓度为1.74μmol/L的条件下,菱形藻能够较好地生长并且进行油脂的积累;其中pH、SiO2-3和Fe3+是影响该藻生长和油脂积累的主要因子。正交试验研究表明,该藻在f/2培养液中生长和油脂积累的最优条件为初始pH=9,SiO2-3和Fe3+添加浓度分别为0.07和100μmol/L。在该最优条件下,该藻的生物量和油脂积累可分别达到94.7mg/L和19.6%。     

点态性质与一致性质的一个新关系

为了研究点态性质和一致性质之间的关系,应用紧性性质在拓扑意义下得到逐点有界性质蕴含一致有界性质的结论,并将其推广到连续函数族的情况.基于Baire定理,得到完备度量空间中的逐点收敛性质可导出一致有界性质的结论.     

面向城市导游的无缝服务研究

智能导游服务已从传统的单一景区导游发展为城市多景区导游,因此,包含了景区间导游和景区内导游两大部分;表现为更加注重面向散客服务、兼容多移动智能终端以应用程序(App)的方式运行。由于景区间导游和景区内导游往往自成系统,在游客进出景区的过程中存在着两种系统的切换,且主要采用手动方式完成,尚没有实现城市多景区导游过程的无缝衔接。为了应对这个挑战,本文设计了一个面向城市多景区的无缝导游服务模式,分析了其架构以及工作机制;并着重讨论了城市无缝导游服务的关键技术,如系统间无缝切换的条件,包含判断游客进入、离开景区等;以及导游服务过程无缝衔接的机制,包含导游动态数据结构的设计,游客游览需求、导游过程状态在多导游系统间的传递等。最后通过实例验证了该方法的有效性,作为新的导游服务模式,同时为动态集成已有的导游App提供了解决方法。     

遥感信息与作物模型结合在冬小麦区域模拟中的应用

遥感数据与作物模型结合是当前农业信息技术应用研究的重要内容和发展趋势之一,能够解决单独利用遥感或作物模型无法解决的问题。为了开展大范围、区域性作物生长过程的模拟和产量预测,首先对作物模型WOFOST进行了订正和验证,使得调整后的模型适于模拟河南新乡县冬小麦生长;根据实际生产分三类情形模拟新乡县2002—2003年度冬小麦的生长发育状况;利用全生育期内能获取的Landsat-7 ETM+数据反演叶面积指数,结合WOFOST模型的模拟情况,确定每个像元对应的冬小麦的生长状况,从而在像元上实现了WOFOST模型对冬小麦生长的模拟;最后对照比较本研究方法的结果与当年新乡县冬小麦的统计情况,结果相近,验证了本文研究方法的技术可行性。     

海岛礁光学和雷达影像基于改进非子采样小波变换的自动配准

Homologous feature point extraction is a key problem in the optical and synthetic aperture radar （SAR） image registration for islands. A new feature point extraction method using a threshold shrink operator and non-subsampled wavelet transform （TSO-NSWT） for optical and SAR image registration was proposed. Moreover, the matching for this proposed feature was different from the traditional feature matching strategies and was performed using a similarity measure computed from neighborhood circles in low-frequency bands. Then, a number of reliably matched couples with even distributions were obtained, which assured the accuracy of the registration. Application of the proposed algorithm to SPOT-5 （multi-spectral） and YG-1 （SAR） images showed that a large number of accurately matched couples could be identified. Additionally, both of the root mean square error （RMSE） patterns of the registration parameters computed based on the TSO-NSWT algorithm and traditional NSWT algorithm were analyzed and compared, which further demonstrated the effectiveness of the proposed algorithm. The algorithm can supply the crucial step for island image registration and island recognition.     

基于三维荧光光谱-平行因子技术联用的浮游藻化学分类学技术研究

An in vivo three-dimensional fluorescence method for the determination of algae community structure was developed by parallel factor analysis(PARAFAC) and CHEMTAX. The PARAFAC model was applied to fluorescence excitation-emission matrix(EEM) of 60 algae species belonging to five divisions and 11 fluorescent components were identified according to the residual sum of squares and specificity of the composition profiles of fluorescent. By the 11 fluorescent components, the algae species at different growth stages were classified correctly at the division level using Bayesian discriminant analysis(BDA). Then the reference fluorescent component ratio matrix was constructed for CHEMTAX, and the EEM–PARAFAC–CHEMTAX method was developed to differentiate algae taxonomic groups. The correct discrimination ratios(CDRs) when the fluorometric method was used for single-species samples were 100% at the division level, except for Bacillariophyta with a CDR of 95.6%. The CDRs for the mixtures were above 94.0% for the dominant algae species and above 87.0% for the subdominant algae species. However, the CDRs of the subdominant algae species were too low to be unreliable when the relative abundance estimated was less than 15.0%. The fluorometric method was tested using the samples from the Jiaozhou Bay and the mesocosm experiments in the Xiaomai Island Bay in August 2007. The discrimination results of the dominant algae groups agreed with microscopy cell counts, as well as the subdominant algae groups of which the estimated relative abundance was above 15.0%. This technique would be of great aid when low-cost and rapid analysis is needed for samples in a large batch. The fluorometric technique has the ability to correctly identify dominant species with proper abundance both in vivo and in situ.     

琼东南盆地深水区构造热演化特征及其影响因素分析

To reveal the tectonic thermal evolution and influence factors on the present heat flow distribution, based on 154 heat flow data, the present heat flow distribution features of the main tectonic units are first analyzed in detail, then the tectonic thermal evolution histories of 20 profiles are reestablished crossing the main deep-water sags with a structural, thermal and sedimentary coupled numerical model. On the basis of the present geothermal features, the Qiongdongnan Basin could be divided into three regions: the northern shelf and upper slope region with a heat flow of 50–70 m W/m2, most of the central depression zone of 70–85 m W/m2, and a NE trending high heat flow zone of 85–105 m W/m2 lying in the eastern basin. Numerical modeling shows that during the syn-rift phase, the heat flow increases generally with time, and is higher in basement high area than in its adjacent sags. At the end of the syn-rift phase, the heat flow in the deepwater sags was in a range of 60–85 m W/m2, while in the basement high area, it was in a range of 75–100 m W/m2. During the post-rift phase, the heat flow decreased gradually, and tended to be more uniform in the basement highs and sags. However, an extensive magmatism, which equivalently happened at around 5 Ma, has greatly increased the heat flow values, and the relict heat still contributes about 10–25 m W/m2 to the present surface heat flow in the central depression zone and the southern uplift zone. Further analyses suggested that the present high heat flow in the deep-water Qiongdongnan Basin is a combined result of the thermal anomaly in the upper mantle, highly thinning of the lithosphere, and the recent extensive magmatism. Other secondary factors might have affected the heat flow distribution features in some local regions. These factors include basement and seafloor topography, sediment heat generation, thermal blanketing, local magmatic injecting and hydrothermal activities related to faulting and overpressure.     

Design of a hydraulic power take-off system for the wave energy device with an inverse pendulum

This paper describes a dual-stroke acting hydraulic power take-off （PTO） system employed in the wave energy converter （WEC） with an inverse pendulum. The hydraulic PTO converts slow irregular reciprocating wave motions to relatively smooth, fast rotation of an electrical generator. The design of the hydraulic PTO system and its control are critical to maximize the generated power. A time domain simulation study and the laboratory experiment of the full-scale beach test are presented. The results of the simulation and laboratory experiments including their comparison at full-scale are also presented, which have validated the rationality of the design and the reliability of some key components of the prototype of the WEC with an inverse pendulum with the dual-stroke acting hydraulic PTO system.     

改善MODIS BRDF产品热点效应的方法研究

核驱动的Ross Thick-LiSparse Reciprocal(RTLSR)双向反射函数(BRDF)模型已广泛地应用于MODIS等星载传感器的业务化产品处理中。但是,对于多年MODIS二向反射产品历史数据,如何基于RTMLSR模型发展一种简单有效快速的方法,进行热点效应的校正是一个迫切需要解决的问题。本文提出了一种简单有效的方法,不需要对观测数据重新反演,直接在现有MODIS二向反射产品的基础上进行热点校正,方便用户对历史MODIS二向反射产品的使用。该方法应用POLDER-3/BRDF数据库和部分经MODIS业务化算法筛选的反射率数据进行验证,并与RTLSR模型和RTMLSR模型的结果进行比较,结果表明:(1)该方法比现有的MODIS业务化RTLSR算法,对热点反射率有明显改善,拟合相对误差平均降低了10.12%;(2)该方法相对于RTMLSR模型在热点反射率拟合效果上差别不大,相对误差相差2.10%;(3)该方法对热点和冷点归一化的植被指数(NDHD)的估算效果有一定程度的改善,相对于RTLSR模型降低了约4.99%,与RTMLSR模型的相对误差相差1.32%,该方法对直接应用现有MODIS BRDF产品,基于热点方向反射率反演植被结构参数(如植被聚集指数)的精度提高有现实应用价值。     

An Overview of BCC Climate System Model Development and Application for Climate Change Studies

This paper reviews recent progress in the development of the Beijing Climate Center Climate System Model(BCC-CSM) and its four component models(atmosphere,land surface,ocean,and sea ice).Two recent versions are described:BCC-CSM1.1 with coarse resolution(approximately 2.8125°×2.8125°) and BCC-CSM1.1(m) with moderate resolution(approximately 1.125°×1.125°).Both versions are fully coupled climate-carbon cycle models that simulate the global terrestrial and oceanic carbon cycles and include dynamic vegetation.Both models well simulate the concentration and temporal evolution of atmospheric CO_2 during the 20th century with anthropogenic CO2 emissions prescribed.Simulations using these two versions of the BCC-CSM model have been contributed to the Coupled Model Intercomparison Project phase five(CMIP5) in support of the Intergovernmental Panel on Climate Change(IPCC) Fifth Assessment Report(AR5).These simulations are available for use by both national and international communities for investigating global climate change and for future climate projections.Simulations of the 20th century climate using BCC-CSMl.l and BCC-CSMl.l(m) are presented and validated,with particular focus on the spatial pattern and seasonal evolution of precipitation and surface air temperature on global and continental scales.Simulations of climate during the last millennium and projections of climate change during the next century are also presented and discussed.Both BCC-CSMl.l and BCC-CSMl.l(m) perform well when compared with other CMIP5 models.Preliminary analyses indicate that the higher resolution in BCC-CSM1.1(m) improves the simulation of mean climate relative to BCC-CSMl.l,particularly on regional scales.