Polarization of individual pulses of radio pulsars at the low frequencies 40, 60, and 103 MHz

Measurements of the linear polarization of individual pulses at 40, 60, and 103 MHz are presented for ten pulsars. The degree and position angle of a linear polarization were measured with a temporal resolution of 1–7 ms, and the longitudinal distributions of these parameters were constructed for each pulsar at one or more of these frequencies. These are the first such measurements for pulsars B0031-07, B0320 + 39, B0628-28, and B2217 + 47. Apart from B0628-28, all the pulsars are characterized by the simultaneous presence of orthogonal polarization modes in at least one component of the integral profile. The secondary polarization mode increases at frequencies ≤100 MHz for pulsars whose integrated pulses contain pairs of conal components (B0031-07, B0329 + 54, B0834 + 06, B1133 + 16, B2020 + 28). This is manifested both as an expansion of the longitudinal range where the secondary polarization mode is observed and an increase in its contribution to the emission at a given longitude. New data confirming the dependence of the linear polarization of individual pulses on the intensity and mode of the pulsar emission have been obtained.     

Color redshifts and the age of the stellar population of distant RC radio galaxies

BV RI data are presented for the majority of steep-spectrum objects in the RC catalog with m _R <23.5^m. Previously developed programs are applied to these data to estimate the redshifts and ages of the stellar systems of the host galaxies. Applying this program to the color data (BV RI JHK) for distant radio galaxies with spectroscopic redshifts indicates that this approach provides accurate estimates of the redshifts of such radio galaxies, close to those obtained using field galaxies (～20%). The age estimates are much less trustworthy, but a lower limit to the ages of objects that are not very distant (z<1.5) can be determined with certainty. We have identi fied several galaxies whose formal ages exceed the age of the Universe at the corresponding z in simple Cold Dark Matter models for the Universe. The possibility of using such objects to elucidate the role of “dark energy” is discussed. This paradox disappears in models with cosmological constants (Λ terms) equal to 0.6–0.8.     

A Platinum Group Element and Re-Os Isotope Investigation of Siderophile Element Recycling in Subduction Zones: Comparison of Grenada, Lesser Antilles Arc, and the Izu-Bonin Arc

The picritic (MgO >13·5%) lavas of Grenada providea unique opportunity to evaluate the platinum group elements(PGE) and Os isotope compositions of primitive subduction-generatedmelts. Compared with other arc lavas they have undergone verylimited crustal contamination (     

Equilibrium and Disequilibrium Trace Element Partitioning in Hydrous Eclogites (Trescolmen, Central Alps)

Despite the widespread presence of hydrous phases in subduction-related systems, experimental D^Min/Fluid trace element valuesfor many hydrous phases are lacking. To fill this gap, we presenta set of D^{Min/Clinopyroxene} values (where Min indicates amphibole,zoisite, phengite, paragonite or apatite) derived from equilibriumparageneses of eclogites from Trescolmen (Central Alps, Switzerland).These data can be combined with experimental data for D^{Clinopyroxene/Fluid},to estimate D^Min/Fluid values for the hydrous phases, thus circumventingexperimental problems with the direct determination of suchvalues. We analysed Li, Be, B, Sr, Y, Zr, Nb, Ba, Ce, Nd, Sm,Pb, Th and U in coexisting phases by laser ablation microprobeinductively coupled plasma mass spectrometry. Many of the valuesare extremely low; for example, Nb, Ba, Ce, Th and U are inthe lower ppb range in clinopyroxene. Attainment of equilibriumwas evaluated by textural, and major and trace element characteristics.Non-equilibrated assemblages are common in most eclogite localities,including Trescolmen, and using such samples would lead to thederivation of erroneous values for equilibrium partitioning.However, four of the 10 studied eclogites from Trescolmen havinghomogeneous clinopyroxene compositions and preferred orientationof high-pressure phases yielded consistent D^{Min/Clinopyroxene}values in all four samples (where Min indicates amphibole, phengite,paragonite, apatite), and hence were studied in detail. Thelow abundances in some phases result from strong preferentialincorporation of trace elements into other minor phases. Fromthe investigated hydrous phases (amphibole, zoisite, clinozoisite,phengite, paragonite, apatite and talc), zoisite was found tobe the most important carrier of Sr, light rare earth elements,Pb, Th and U, whereas phengite hosts Ba and is, along with clinopyroxeneand paragonite, an important phase for B. However, because oftheir low modal abundance in eclogite-facies rocks, phengiteand paragonite do not control the B whole-rock budget. We inferthat estimated D^{Min/Clinopyroxene} values from equilibrium assemblagescan be used as a good approximation for partition coefficientsunder the given PT conditions (     

Spatial variation of overbank aggradation rate and its influence on avulsion frequency

Abstract River avulsions are commonly considered to be driven by the aggradation and growth of alluvial ridges, and the associated increase in cross‐valley slope relative to either the down‐channel slope or the down‐valley slope (the latter is termed the slope ratio in the present paper). Therefore, spatial patterns of overbank aggradation rate over stratigraphically relevant time scales are critical in avulsion‐dominated models of alluvial architecture. Detailed evidence on centennial‐ to millennial‐scale floodplain deposition has, to date, been largely unavailable. New data on such long‐term overbank aggradation rates from the Rhine–Meuse and Mississippi deltas demonstrate that the rate of decrease of overbank deposition away from the channel belt is much larger than has been supposed hitherto, and can be similar to observations for single overbank floods. This leads to more rapid growth of alluvial ridges and more rapid increase in slope ratios, potentially resulting in increased avulsion frequencies. A revised input parameter for overbank aggradation rate was used in a three‐dimensional model of alluvial architecture to study its effect on avulsion frequency. Realistic patterns of avulsion and interavulsion periods (≈1000 years) were simulated with input data from the Holocene Rhine River, with avulsions occurring when the slope ratio is in the range 3–5. However, caution should be practised with respect to uncritical use of these numbers in different settings. Evidence from the two study areas suggests that the avulsion threshold cannot be represented by one single value, irrespective of whether critical slope ratios are used, as in the present study, or superelevation as has been proposed by other investigators.     

Quantitative analysis of variations in depositional sequence thickness from submarine channel levees

Abstract Thickness variations across‐levee and downchannel in acoustically defined depositional sequences from six submarine channel‐levee systems show consistent and quantifiable patterns. The thickness of depositional sequences perpendicular to the channel trend, i.e. across the levee, decreases exponentially, as characterized by a spatial decay constant, k. Similarly, the thickness of sediment at the levee crest decreases exponentially down the upper reaches of submarine channels and can be characterized by a second spatial decay constant, λ. The inverse of these decay constants has units of length and defines depositional length scales such that k^?1 is a measure of levee width and λ^?1 is a measure of levee length. Quantification of levee architecture in this way allowed investigation of relationships between levee architecture and channel dimensions. It was found that these measures of levee e‐folding width and levee e‐folding length are directly related to channel width and relief. The dimensions of channels and levees are thus intimately related, thereby limiting the range of potential channel‐levee morphologies, regardless of allocyclic forcing. A simple sediment budget model relates the product of the levee e‐folding width and e‐folding length to through‐channel volume discharge. A classification system based on the quantitative downchannel behaviour of levee architecture allows identification of a ‘mid‐channel’ reach, where sediment is passively transferred from the through‐channel flow to the levees as an overspilling flow. Downstream from this reach, the channel gradually looses its control on guiding turbidity currents, and the resulting flow can be considered as an unconfined or spreading flow.     

High-T, low-P metamorphism in the Palaeoproterozoic Halls Creek Orogen, northern Australia: the middle crustal response to a mantle-related transient thermal pulse

High‐T, low‐P metamorphic rocks of the Palaeoproterozoic central Halls Creek Orogen in northern Australia are characterised by low radiogenic heat production, high upper crustal thermal gradients (locally exceeding 40 °C km^?1) sustained for over 30 Myr, and a large number of layered mafic‐ultramafic intrusions with mantle‐related geochemical signatures. In order to account for this combination of geological and thermal characteristics, we model the middle crustal response to a transient mantle‐related heat pulse resulting from a temporary reduction in the thickness of the mantle lithosphere. This mechanism has the potential to raise mid‐crustal temperatures by 150–400 °C within 10–20 Myr following initiation of the mantle temperature anomaly, via conductive dissipation through the crust. The magnitude and timing of maximum temperatures attained depend strongly on the proximity, duration and lateral extent of the thermal anomaly in the mantle lithosphere, and decrease sharply in response to anomalies that are seated deeper than 50–60 km, maintained for <5 Myr in duration and/or have half‐widths <100 km. Maximum temperatures are also intimately linked to the thermal properties of the model crust, primarily due to their influence on the steady‐state (background) thermal gradient. The amplitudes of temperature increases in the crust are principally a function of depth, and are broadly independent of crustal thermal parameters. Mid‐crustal felsic and mafic plutonism is a predictable consequence of perturbed thermal regimes in the mantle and the lowermost crust, and the advection of voluminous magmas has the potential to raise temperatures in the middle crust very quickly. Although pluton‐related thermal signatures significantly dissipate within <10 Myr (even for very large, high‐temperature intrusive bodies), the interaction of pluton‐ and mantle‐related thermal effects has the potential to maintain host rock temperatures in excess of 400–450 °C for up to 30 Myr in some parts of the mid‐crust. The numerical models presented here support the notion that transient mantle‐related heat sources have the capacity to contribute significantly to the thermal budget of metamorphism in high‐T, low‐P metamorphic belts, especially in those characterised by low surface heat flow, very high peak metamorphic geothermal gradients and abundant mafic intrusions.     

Internal deformation of Sikhote Alin volcanic belt, far eastern Russia: Paleocene paleomagnetic results

We present paleomagnetic results of Paleocene welded tuffs of the 53–50 Ma Bogopol Group from the northern region (46°N, 137°E) of the Sikhote Alin volcanic belt. Characteristic paleomagnetic directions with high unblocking temperature components above 560 °C were isolated from all the sites. A tilt-corrected mean paleomagnetic direction from the northern region is D=345.8°, I=49.9°, α₉₅=14.6° (N=9). The reliability of the magnetization is ascertained through the presence of normal and reversed polarities. The mean paleomagnetic direction from the northern region of the Sikhote Alin volcanic belt reflects a counterclockwise rotation of 29° from the Paleocene mean paleomagnetic direction expected from its southern region. The counterclockwise rotation of 25° is suggested from the paleomagnetic data of the Kisin Group that underlies the Bogopol Group. These results establish that internal tectonic deformation occurred within the Sikhote Alin volcanic belt over the past 50 Ma. The northern region from 44.6° to 46.0°N in the Sikhote Alin volcanic belt was subjected to counterclockwise rotational motion through 29±17° with respect to the southern region. The tectonic rotation of the northern region is ascribable to relative motion between the Zhuravlevka terrane and the Olginsk–Taukhinsk terranes that compose the basements of the Sikhote Alin volcanic belt.     

The geological and geodynamic evolution of the eastern Black Sea basin: insights from 2-D and 3-D tectonic modelling

Subsidence mechanisms that may have controlled the evolution of the eastern Black Sea have been studied and simulated using a numerical model that integrates structural, thermal, isostatic and surface processes in both two- (2-D) and three-dimensions (3-D). The model enables the forward modelling of extensional basin evolution followed by deformation due to subsequent extensional and compressional events. Seismic data show that the eastern Black Sea has evolved via a sequence of interrelated tectonic events that began with early Tertiary rifting followed by several phases of compression, mainly confined to the edges of the basin. A large magnitude (approximately 12 km) of regional subsidence also occurred in the central basin throughout the Tertiary. Models that simulate the magnitude of observed fault controlled extension (β=1.13) do not reproduce the total depth of the basin. Similarly, the modelling of compressional deformation around the edges of the basin does little to enhance subsidence in the central basin. A modelling approach that quantifies lithosphere extension according to the amount of observed crustal thinning and thickening across the basin provides the closest match to overall subsidence. The modelling also shows that deep crustal and mantle–lithosphere processes can significantly influence the rate and magnitude of syn- to post-rift subsidence and shows that such mechanisms may have played an important role in forming the anomalously thin syn-rift and thick Miocene–Quaternary sequences observed in the basin. It is also suggested that extension of a 40–45 km thick pre-rift crust is required to generate the observed magnitude of total subsidence when considering a realistic bathymetry.     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.