Spatial distribution, diversity and composition of bacterial communities in sub-seafloor fluids at a deep-sea hydrothermal field of the Suiyo Seamount

Spatial distribution, diversity, and composition of bacterial communities within the shallow sub-seafloor at the deep-sea hydrothermal field of the Suiyo Seamount, Izu-Bonin Arc, Western Pacific Ocean, were investigated. Fluids were sampled from four boreholes in this area. Each borehole was located near or away from active vents, the distance ranging 2–40 m from active vents. In addition, fluids discharging from a natural vent and ambient seawater were sampled in this area. We extracted DNA from each sample, amplified bacterial 16S rRNA genes by PCR, cloned the PCR products and sequenced. The total number of clones analyzed was 348. Most of the detected phylotypes were affiliated with the phylum Proteobacteria, of which the detection frequency in each clone library ranged from 84.6% to 100%. The bacterial community diversity and composition were different between hydrothermal fluids and seawater, between fluids from the boreholes and the vent, and even among fluids from each borehole. The relative abundances of the phylotypes related to Thiomicrospira, Methylobacterium and Sphingomonas were significantly different among fluids from each borehole. The phylotypes related to Thiomicrospira and Alcanivorax were detected in all of the boreholes and vent samples. Our findings provide insights into bacterial communities in the shallow sub-seafloor environments at active deep-sea hydrothermal vent fields.     

Compositional diversity of ordinary chondrites inferred from petrology,bulk chemical,and oxygen isotopic compositions of the lowest FeO ordinary chondrite,Yamato 982717

We performed a petrologic, geochemical, and oxygen isotopic study of the lowest FeO ordinary chondrite (OC), Yamato (Y) 982717. Y 982717 shows a chondritic texture composed of chondrules and chondrule fragments, and mineral fragments set in a finer grained, clastic matrix, similar to H4 chondrites. The composition of olivine (Fa_{11.17 ± 0.48 (1σ)}) and low‐Ca pyroxene (Fs_{11.07 ± 0.98 (1σ)}Wo_{0.90 ± 0.71(1σ)}) is significantly more magnesian than those of typical H chondrites (Fa_16.0‐20, Fs_14.5‐18.0), as well as other known low‐FeO OCs (Fa_12.8‐16.7; Fs_13‐16). However, the bulk chemical composition of Y 982717, in particular lithophile and moderately volatile elements, is within the range of OCs. The bulk siderophile element composition (Ni, Co) is within the range of H chondrites and distinguishable from L chondrites. The O‐isotopic composition is also within the range of H chondrites. The lack of reduction textures indicates that the low olivine Fa content and low‐Ca pyroxene Fs content are characteristics of the precursor materials, rather than the result of reduction during thermal metamorphism. We suggest that the H chondrites are more compositionally diverse than has been previously recognized.     

Primordial and cosmogenic noble gases in the Sutter's Mill CM chondrite

The Sutter's Mill (SM) CM chondrite fell in California in 2012. The CM chondrite group is one of the most primitive, consisting of unequilibrated minerals, but some of them have experienced complex processes occurring on their parent body, such as aqueous alteration, thermal metamorphism, brecciation, and solar wind implantation. We have determined noble gas concentrations and isotopic compositions for SM samples using a stepped heating gas extraction method, in addition to mineralogical observation of the specimens. The primordial noble gas abundances, especially the P3 component trapped in presolar diamonds, confirm the classification of SM as a CM chondrite. The mineralogical features of SM indicate that it experienced mild thermal alteration after aqueous alteration. The heating temperature is estimated to be <350 °C based on the release profile of primordial ³⁶Ar. The presence of a Ni‐rich Fe‐Ni metal suggests that a minor part of SM has experienced heating at >500 °C. The variation in the heating temperature of thermal alteration is consistent with the texture as a breccia. The heterogeneous distribution of solar wind noble gases is also consistent with it. The cosmic‐ray exposure (CRE) age for SM is calculated to be 0.059 ± 0.023 Myr based on cosmogenic ²¹Ne by considering trapped noble gases as solar wind, the terrestrial atmosphere, P1 (or Q), P3, A2, and G components. The CRE age lies at the shorter end of the CRE age distribution of the CM chondrite group.     

A New Solar Imaging System for Observing High-Speed Eruptions: <Emphasis Type="Italic">Solar Dynamics Doppler Imager</Emphasis> (SDDI)

A new solar imaging system was installed at Hida Observatory to observe the dynamics of flares and filament eruptions. The system (Solar Dynamics Doppler Imager; SDDI) takes full-disk solar images with a field of view of \(2520~\mbox{arcsec} \times 2520~\mbox{arcsec}\) at multiple wavelengths around the \(\mathrm{H}\alpha\) line at 6562 Å. Regular operation was started in May 2016, in which images at 73 wavelength positions spanning from \(\mathrm{H}\alpha -9~\mathring{\mathrm{A}}\) to \(\mathrm{H}\alpha +9~\mathring{\mathrm{A}}\) are obtained every 15 seconds. The large dynamic range of the line-of-sight velocity measurements (\({\pm}\,400~\mbox{km}\,\mbox{s}^{-1}\)) allows us to determine the real motions of erupting filaments in 3D space. It is expected that SDDI provides unprecedented datasets to study the relation between the kinematics of filament eruptions and coronal mass ejections (CME), and to contribute to the real-time prediction of the occurrence of CMEs that cause a significant impact on the space environment of the Earth.     

Variations in the thermal conductivities of surface sediments in the Nankai subduction zone off Tokai, central Japan

We investigated the relationship between variations in the thermal conductivity of surface sediments and the topography in the Nankai subduction zone off Tokai, central Japan, the easternmost part of the Nankai subduction zone, which has an accretionary prism with varied topography. We analyzed sediment thermal conductivity data obtained from the trough floor and accretionary prism. Variations in the thermal conductivity of sediments were related to the topographic features formed by accretionary prism development. Thermal conductivities of 1.1?W/m?K were measured on the trough floor where thick terrigenous turbidites have been deposited. The thermal conductivity of Nankai Trough floor sediments decreases from northeast to southwest along the trough, probably because of the decreased grain size and/or changes in sediment mineral composition. High thermal conductivities (??1.0?W/m?K) were measured in fault scarps on the accretionary prism. A landward increase in these values on the prism may be explained by decreased porosity of the sediments attributable to tectonic deformation during accretionary prism development. At the base of the fault scarp of the frontal thrust, low thermal conductivities (<0.9?W/m?K) were measured, likely reflecting the high porosity of the talus deposits. Low thermal conductivity (0.9?W/m?K) was also measured in slope basins on the accretionary prism, likely also related to the high porosity of the sediments. Our results demonstrate that, for accurate heat flow measurement in an area of varied topography, the geothermal gradient and the thermal conductivity of the sediments must be measured within regions with similar topographic features.     

Distribution of glycerol dialkyl glycerol tetraethers, alkenones and polyunsaturated fatty acids in suspended particulate organic matter in the East China Sea

We investigated the spatial distribution of glycerol dialkyl glycerol tetraethers (GDGTs), alkenones, and polyunsaturated fatty acids in particulate organic matter collected at four sites along a depth transect from the continental shelf to the Okinawa Trough in the East China Sea during the spring bloom in 2008. The maximum alkenone concentration appeared in the top 25?m at all sites and the $ U_{37}^{{{\text{K}}'}} $ values were consistent with in situ water temperatures in the depth interval, suggesting that the alkenones were produced mainly in surface water. At the slope and shelf sites, GDGTs in the water column showed a concentration maximum at 74?C99?m depth, and the $ {\text{TEX}}_{86}^{\text{H}} $ agreed with in situ water temperatures, suggesting the in situ production of GDGTs in the depth interval. The low-salinity surface water above 20?m depth was characterized by low GDGT concentrations and low $ {\text{TEX}}_{86}^{\text{L}} $ -based temperatures, suggesting either the production of GDGTs in winter season or the lateral advection of GDGTs by an eastward current. At the slope and Okinawa Trough sites, TEX₈₆-based temperatures were nearly constant in the water column deeper than 300?m and corresponded to temperatures at the surface and near-surface waters rather than in situ temperatures. This observation is consistent with a hypothesis that Thaumarchaeota cells produced in surface waters are delivered to deeper water and also indicates that the residence time of suspended GDGTs in the deep-water column is large enough to mix the GDGTs produced in different seasons.     

1978和2005年宫城近海地震的动力学震源模拟:破裂能解释

对1978和2005年发生在同一板块边界而震级不同的日本宫城近海地震建立了自发动力破裂模型,再现了由运动学震源模型所预测的滑动和破裂速度。对这两次地震的动力学震源参数进行比较,可使我们看到同一断层上不同震源过程的破裂动力学特征。特别是,我们比较了应力降和破裂能,在这两次地震中,二者可以进行稳定的评估。在整个断层面上和两次地震破裂的凹凸体上,两个模型中应力降的最大值和平均值几乎相同。另外,1978年地震的震级比2005年的大,它的破裂能值不仅是在整个断层面上,而且在多次破裂的凹凸体上也比2005年的大。这些结果与先前用地震矩所做的破裂能标度的研究结果一致。我们还将破裂能值与以前研究中所估算的其他内陆地震的能值进行了对比,我们得到的宫城近海地震的值较小。造成这种不一致的原因可能是内陆浅源地震和俯冲带深源地震在构造背景上的差异。     

Physical property anisotropy of foliated fault rocks: Study from the Nobeoka Thrust,Shimanto Belt,southwest Japan

To investigate the physical property anisotropies of foliated fault rocks in subduction zones, the hanging wall phyllites and footwall cataclasites exhumed along the Nobeoka Thrust, a fossilized out‐of‐sequence‐thrust in the Shimanto Belt, Japan, was focused. Discrete physical property (electric resistivity, P‐ and S‐wave velocities, and porosity) measurements were conducted employing geologic coordinates (depth‐parallel direction, strike direction, and maximum dip direction of foliation), using the core samples obtained from the Nobeoka Thrust Drilling Project and compared the data to borehole geophysical logs. A higher sample P‐wave velocity (Vp), lower S‐wave velocity (Vs), higher Vp/Vs, and lower sample porosity and resistivity compared to the logs, are inferred to have been caused by the larger sampling scale of the logs and lower fluid saturation of the borehole. The phyllites and cataclasites exhibited substantial vertical and horizontal anisotropy of Vp (0.4–17.3 % and 2.7–13.8 %, respectively), Vs (0.5–56 % and 7.7–43 %, respectively), and resistivity (0.9–119 % and 2.0–65.9 %, respectively). The physical property anisotropies are primarily affected by the dip angles of foliation. The fault rocks that have gentler dip angles exhibit a higher Vp in the strike and maximum dip direction and a lower Vp in the depth‐parallel direction. In contrast, the fault rocks that have steeply dipping structures show a higher Vp in the strike and depth‐parallel directions with a lower velocity in the maximum dip direction. Resistivity anisotropy show a trend opposite to that of the Vp in relation to the dip angles. Our results show lower Vp anisotropy than those obtained in previous studies, which measured wave speeds perpendicular or parallel to foliation under confining pressure. This study highlights the significance of dip angles on vertical properties in geophysical surveys across foliated fault rocks.     

Acoustic properties of deformed rocks in the Nobeoka thrust,in the Shimanto Belt,Kyushu, Southwest Japan

Laboratory measurements for compressional and shear wave velocities (Vp and Vs, respectively) and porosity were conducted with core samples from the Nobeoka Thrust Drilling Project (NOBELL) under controlled effective pressure (5–65 MPa at 5 MPa intervals) and wet conditions. Samples were classified according to deformation texture as phyllite, foliated cataclasite, or non‐foliated cataclasite. Measured values of Vp, Vs, and porosity are within a range of 5.17–5.57 km/s, 2.60–2.71 km/s, and 2.75–3.10 %, respectively, for phyllite; 4.89–5.23 km/s, 2.46–2.57 km/s, and 3.58–4.53 %, respectively, for foliated cataclasite; and 4.90–5.32 km/s, 2.51–2.63 km/s, and 3.79–4.60 %, respectively, for non‐foliated cataclasite, which are all consistent with the previous laboratory experiments conducted with outcrop samples under dry conditions. However, our results also indicate higher Vp and Vs and lower porosity than those measured by the previous studies that adopted the wire‐line logging methods. The variations in Vp, Vs, and porosity are controlled by deformation structure and are greater for phyllite and foliated cataclasite than for non‐foliated cataclasite.     

Global detection of aridification or increasing wetness in arid regions from 2001 to 2013

Natural Hazards - Arid regions are highly vulnerable to climate change and human activity, and global warming in particular has the potential to increase the arid land area. One traditional way to...