Microboudin structures of piemontite along the Sambagawa metamorphic belt, Japan: implications for lateral variation of differential stress during regional metamorphism

Evidence is presented of a lateral variation in differential stress during metamorphism along a regional metamorphic belt on the basis of the proportion of microboudinaged piemontite grains (p) in a quartz matrix in metacherts. It is proposed that p is a practical indicator of relative differential stress. Analysis of 123 metacherts from the 800 km long Sambagawa metamorphic belt, Japan, reveals that p‐values range from < 0.01 to 0.7 in this region. Most samples from Wakayama in the mid‐belt area have p‐values of 0.4–0.6, whereas those from western Shikoku have p‐values of < 0.1. This difference cannot be explained by variations in metamorphic temperature, and is instead attributed to a regional, lateral variation in differential stress during metamorphism.     

A pair of Langmuir cells in two laboratory tanks (II) on generation mechanism

Vertical and cross-wind profiles of mean currents were measured systematically in vertical cross-sections of two wind-wave tanks with aspect ratios of order one to study the secondary flow in the tanks. A pair of Langmuir cells turned out to be driven by a close combination of the pressure gradient along the tank and the side-wall effects. That is, part of the adverse pressure gradient produced a parabolic cross-wind profile with the smallest downwind current at the centerline and the largest current along the two sidewalls. As a result, upwelling occurred in the center zone where the return flow was strongest, probably because of the entrainment action of the wind-driven current. In order to compensate for this upwelling, downwelling occurred along the two side-walls from the flow continuity. The resulting vertical circulation formed a pair of Langmuir circulations across the span and served to maintain the parabolic profile formed by the pressure gradient. A positive feedback mechanism is thus found between the primary and secondary circulations through upwelling of the return flow in the center zone. Vertical shears of the span-averaged downwind current measured in two tanks were found to be systematically different from each other. This difference seems to depend on the magnitude of the advective Reynolds stresses in the two tanks.     

Stage-V copepodites of Calanus sinicus and Calanus jashnovi (Copepoda: Calanoida) in mesopelagic zone of Sagami Bay as identified with genetic markers, with special reference to their vertical distribution

We applied genetic makers to identify Calanus species occurring in Sagami Bay, Japan, in order to investigate their vertical distribution in the upper 1000 m. First, interspecific genetic distances of three gene loci, mitochondrial small ribosomal RNA (srRNA), nuclear internal transcribed spacers 1 (ITS1) and 2 (ITS2), were estimated from morphologically distinguishable adult females of Calanus sinicus, Calanus jashnovi and Calanus pacificus that were collected from Sagami Bay, the Kuroshio Extension and the Oyashio region, respectively. The highest levels of interspecific genetic distance were observed in srRNA, followed by ITS1 and ITS2. The intraspecific genetic distances within C. sinicus were much lower than the interspecific genetic distances, indicating that DNA sequences in these loci are consistent with the morphological differences. This information was used as a criterion for species identification based on DNA sequence variation, and allowed us to identify the fifth copepodites (CVs) or younger stages of these species. Next, the vertical distribution of Calanus species was investigated in Sagami Bay in May 2006, on the basis of a stratified sampling in the upper 1000 m. By applying the genetic markers, 23 individuals comprising all copepodite stages were allocated into either C. sinicus or C. jashnovi, and the small- and large-sized CVs were identified as C. sinicus and C. jashnovi, respectively. The total abundance of C. sinicus was highest at 0-50 m and decreased with depth. On the contrary, CV individuals of C. sinicus were abundant not only in 0-50 m but also below 200 m with minimum occurrences in 150-200 m depth. C. jashnovi was much less abundant than C. sinicus and comprised of only CIV and CV which occurred in the upper 100 m and deeper than 50 m depths, respectively. The abundance of C. sinicus in the 1000-m water column of Sagami Bay was at a level comparable to that in shelf waters, suggesting the importance of off-shelf individuals in the biological production and organic transport in the respective areas.     

Spin rates of small moonlets embedded in planetary rings: I. Three-body calculations

We investigate the spin rates of moonlets embedded in planetary rings, subject to collisions with surrounding small particles, using three-body integrations including friction and spins. All successive impacts of the particle with the moonlet are followed, including a possible sliding phase after the initial inelastic rebounds. Two methods for treating impacts, (1) as instantaneous velocity changes and (2) using an impact force model, are applied after Salo (1995, Icarus 117, 287). Conducting a series of integrations with various initial summed spin velocity of the moonlet and the particle, we determine the equilibrium spin rate for which the averaged torque vanishes. This equilibrium spin rate corresponds to the final spin rate of the moonlet if the moonlet is much larger than the surrounding particles; it also corresponds to the mean spin rate for a ring composed of identical particles. We find that the equilibrium spin rate is enhanced by sliding orbits as compared with the spin rate determined by considering only the first impacts of the particles with the moonlet. If the random velocities of incident particles are small enough, the resulting equilibrium spin rate of the moonlet can be larger than the synchronous rotation rate, for r_p∼1, where r_p denotes the sum of radii of the colliding pair normalized by their mutual Hill radius. In this special case aggregates without internal strength may become rotationally unstable. However, the equilibrium spin rate decreases with increasing random velocity, and aggregates are always rotationally stable in the more likely case where the relative velocities are comparable to the mutual escape velocity. We also compare our results with the mean spin rates found in previous N-body simulations, and find a good agreement for optically thin rings; however the spin rates for optically thick rings are significantly larger than those predicted by our three-body calculations.     

Noble gases in ureilites released by crushing

Abstract— Noble gases in two ureilites, Kenna and Allan Hills (ALH) 78019, were measured with two extraction methods: mechanical crushing in a vacuum and heating. Large amounts of noble gases were released by crushing, up to 26.5% of ¹³²Xe from ALH 78019 relative to the bulk concentration. Isotopic ratios of the crush‐released Ne of ALH 78019 resemble those of the trapped Ne components determined for some ureilites or terrestrial atmosphere, while the crush‐released He and Ne from Kenna are mostly cosmogenic. The crush‐released Xe of ALH 78019 and Kenna is similar in isotopic composition to Q gas, which indicates that the crush‐released noble gases are indigenous and not caused by contamination from terrestrial atmosphere. In contrast to the similarities in isotopic composition with the bulk samples, light elements in the crush‐released noble gases are depleted relative to Xe and distinct from those of each bulk sample. This depletion is prominent especially in the ²⁰Ne/¹³²Xe ratio of ALH 78019 and the ³⁶Ar/¹³²Xe ratio of Kenna. The values of measured ³He/²¹Ne for the gases released by crushing are significantly higher than those for heating‐released gases. This suggests that host phases of the crush‐released gases might be carbonaceous because cosmogenic Ne is produced mainly from elements with a mass number larger than Ne. Based on our optical microscopic observation, tabular‐foliated graphite is the major carbon mineral in ALH 78019, while Kenna contains abundant polycrystalline graphite aggregates and diamonds along with minor foliated graphite. There are many inclusions at the edge and within the interior of olivine grains that are reduced by carbonaceous material. Gaps can be seen at the boundary between carbonaceous material and silicates. Considering these petrologic and noble gas features, we infer that possible host phases of crush‐released noble gases are graphite, inclusions in reduction rims, and gaps between carbonaceous materials and silicates. The elemental ratios of noble gases released by crushing can be explained by fractionation, assuming that the starting noble gas composition is the same as that of amorphous carbon in ALH 78019. The crush‐released noble gases are the minor part of trapped noble gases in ureilites but could be an important clue to the thermal history of the ureilite parent body. Further investigation is needed to identify the host phases of the crush‐released noble gases.     

Oxygen isotope characteristics of chondrules from the Yamato‐82094 ungrouped carbonaceous chondrite: Further evidence for common O‐isotope environments sampled among carbonaceous chondrites

High‐precision secondary ion mass spectrometry (SIMS) was employed to investigate oxygen three isotopes of phenocrysts in 35 chondrules from the Yamato (Y) 82094 ungrouped 3.2 carbonaceous chondrite. Twenty‐one of 21 chondrules have multiple homogeneous pyroxene data (?¹⁷O 3SD analytical uncertainty: 0.7‰); 17 of 17 chondrules have multiple homogeneous pyroxene and plagioclase data. Twenty‐one of 25 chondrules have one or more olivine data matching coexisting pyroxene data. Such homogeneous phenocrysts (1) are interpreted to have crystallized from the final chondrule melt, defining host O‐isotope ratios; and (2) suggest efficient O‐isotope exchange between ambient gas and chondrule melt during formation. Host values plot within 0.7‰ of the primitive chondrule mineral (PCM) line. Seventeen chondrules have relict olivine and/or spinel, with some δ¹⁷O and δ¹⁸O values approaching ?40‰, similar to CAI or AOA‐like precursors. Regarding host chondrule data, 22 of 34 have Mg#s of 98.8–99.5 and ?¹⁷O of ?3.9‰ to ?6.1‰, consistent with most Acfer 094, CO, CR, and CV chondrite chondrules, and suggesting a common reduced O‐isotope reservoir devoid of ¹⁶O‐poor H₂O. Six Y‐82094 chondrules have ?¹⁷O near ?2.5‰, with Mg#s of 64–97, consistent with lower Mg# chondrules from Acfer 094, CO, CR, and CV chondrites; their signatures suggest precursors consisting of those forming Mg# ~99, ?¹⁷O: ?5‰ ± 1‰ chondrules plus ¹⁶O‐poor H₂O, at high dust enrichments. Three type II chondrules plot slightly above the PCM line, near the terrestrial fractionation line (?¹⁷O: ~+0.1‰). Their O‐isotopes and olivine chemistry are like LL3 type II chondrules, suggesting they sampled ordinary chondrite‐like chondrule precursors. Finally, three Mg# >99 chondrules have ?¹⁷O of ?6.7‰ to ?8.1‰, potentially due to ¹⁶O‐rich refractory precursor components. The predominance of Mg# ~99, ?¹⁷O: ?5‰ ± 1‰ chondrules and a high chondrule‐to‐matrix ratio suggests bulk Y‐82094 characteristics are closely related to anhydrous dust sampled by most carbonaceous chondrite chondrules.     

Temperature measurements of electrostatic shocks in?laser-produced counter-streaming plasmas

Collisionless shocks in counter-streaming plasmas, created by the high-power laser system Gekko XII HIPER, are investigated. The shock structure and density are measured by optical diagnostics such as shadowgraphy, interferometry, and streaked interferometry. The plasma density and temperature are estimated from self-emission measurements with visible light by streaked optical pyrometer and gated optical imager. Brightness temperatures are calculated considering the efficiency of the detectors, and electron temperatures are estimated.     

Triaxial stress state deep in orogenic belts: an example from Turkey

A rare metachert pebble containing amphibole grains with microboudin structures in a wide range of orientations provides an opportunity to perform stress analysis in two orthogonal orientations on the foliation surface. The sample was analysed by the microboudin method to infer the triaxial stress state during microboudinage. Stress parameters proportional to the far-field differential stress were determined for sodic amphibole grains in the two orientations. The ratio of the stresses in the two orthogonal orientations (σ₁−σ₂)/(σ₁−σ₃) was calculated to be 0.64, indicating that σ₂ lies closer to the midpoint between σ₁ and σ₃ than to σ₃.