An analysis of failure mechanism constraints on pre-failure rock block deformation using TLS and roto-translation methods

Rockfall hazards increase the risk of train derailment along railway corridors in western Canada. In this study, repeated terrestrial laser scanning (TLS) datasets were collected every 2–3 months at three different sites along the Thompson and Fraser River corridors in British Columbia, referred to as the Goldpan, White Canyon, and Mile 109 sites. A total of 207 rockfall events occurring across all three sites between November 11, 2014 and October 18, 2016 were recorded in a database. For each of these rockfalls, pre-failure deformation was measured using a method of three-dimensional roto-translation block tracking. Each rockfall was classified by its deformation behaviour and further categorised based on failure mechanism, volume, lithology, and the roughness condition of the failure plane. Results reveal that detectable levels of deformation were measured in 33% of the total number of rockfall events using the present methods. Rotation deformation was most commonly observed in toppling failures with relatively steep joint orientations. Conversely, planar sliding blocks generally exhibited the least measurable deformation, with the majority not showing any precursory translation or rotation. It is postulated that overhanging rockfall configurations may suppress the expression of deformation in rockfall source blocks, though additional research is required to confirm this.     

The origins of marine and non-marine boulder deposits: a brief review

Natural Hazards - We identify 14 mechanisms, marine and non-marine, one man made, that result and could result in the formation of boulder deposits after reviewing issues associated with clast...     

Can a dam type of an alpine lake be derived from lake geometry?A negative result

Glacial lake outburst floods(GLOFs)represent one of the most serious hazard and risk in deglaciating high mountain regions worldwide and the need for GLOF hazard and risk assessment is apparent.As a consequence,numerous region-and nation-wide GLOF assessment studies have been published recently.These studies cover large areas and consider hundreds to thousands of lakes,prioritizing the hazard posed by them.Clearly,certain simplification is required for executing such studies,often resulting in neglecting qualitative characteristics which would need manual assignment.Different lake dam types(e.g.,bedrock-dammed,moraine-dammed)are often not distinguished,despite they control GLOF mechanism(dam overtopping/dam breach)and thus GLOF magnitude.In this study,we explore the potential of easily measurable quantitative characteristics and four ratios to approximate the lake dam type.Our dataset of 851 lakes of the Cordillera Blanca suggests that while variances and means of these characteristics of individual lake types differ significantly(F-test,t-test),value distribution of different geometrical properties can’t be used for the originally proposed purpose along the spectra.The only promising results are obtained for extreme values(selected bins)of the ratios.For instance,the low width to length ratio indicates likely morainedammed lake while the high value of ratio indicating round-shape of the lake indicates increased likelihood of bedrock-dammed lake.Overall,we report a negative result of our experiment since there are negligible differences of relative frequencies in most of the bins along the spectra.     

The eccentric case of a fast-rotating,gravity-gradient-perturbed satellite attitude solution

A closed-form first-order perturbation solution for the attitude evolution of a triaxial space object in an elliptical orbit is presented. The solution, derived using the Lie–Deprit method, takes into account gravity-gradient torque and is facilitated by an assumption of fast rotation of the object. The formulation builds on the earlier implementation of Lara and Ferrer, which assumes a circular orbit. The previously presented work—which assumes spin about an object’s axis of maximum inertia—is further extended by the explicit presentation of the transformations required to apply the solution to an object spinning about its axis of minimum inertia. Additionally, several numerical analyses are presented to more completely assess the utility of the solution. These studies (1) validate the elliptical solution, (2) assess the impact of varying the small parameter of the perturbation procedure, (3) analyze the assumption of fast rotation, and (4) apply the solution to the common and important scenario of a tumbling rocket body.     

Flexural deformation controls on Late Quaternary sediment dispersal in the Garo-Rajmahal Gap,NW Bengal Basin

Subsurface deformation is a driver for river path selection when deformation rates become comparable to the autogenic mobility rate of rivers. Here we combine geomorphology, soil and sediment facies analyses, and geophysical data of the Late Quaternary sediments of the central Garo-Rajmahal Gap in Northwest Bengal to link subsurface deformation with surface processes. We show variable sedimentation characteristics, from slow rates (<0.8 mm/year) in the Tista megafan at the foot of the Himalaya to nondeposition at the exposed surface of the Barind Tract to the south, enabling the development of mature soils. Combined subsidence in the Tista fan and uplift of the Barind Tract are consistent with a N-S flexural response of the Indian plate to loading of the Himalaya Mountains given a low value of elastic thickness (15–25 km). Provenance analysis based on bulk strontium concentration suggests a dispersal of sediment consistent with this flexural deformation—in particular the abandonment of the Barind Tract by a Pleistocene Brahmaputra River and the current extents of the Tista megafan lobes. Overall, these results highlight the control by deeply rooted deformation patterns on the routing of sediment by large rivers in foreland settings.     

Record of Late Pleistocene Glaciation and Deglaciation in the Southern Cascade Range. I. Petrological Evidence from Lacustrine Sediment in Upper Klamath Lake, Southern Oregon

Petrological and textural properties of lacustrine sediments from Upper Klamath Lake, Oregon, reflect changing input volumes of glacial flour and thus reveal a detailed glacial history for the southern Cascade Range between about 37 and 15 ka. Magnetic properties vary as a result of mixing different amounts of the highly magnetic, glacially generated detritus with less magnetic, more weathered detritus derived from unglaciated parts of the large catchment. Evidence that the magnetic properties record glacial flour input is based mainly on the strong correlation between bulk sediment particle size and parameters that measure the magnetite content and magnetic mineral freshness. High magnetization corresponds to relatively fine particle size and lower magnetization to coarser particle size. This relation is not found in the Buck Lake core in a nearby, unglaciated catchment. Angular silt-sized volcanic rock fragments containing unaltered magnetite dominate the magnetic fraction in the late Pleistocene sediments but are absent in younger, low magnetization sediments. The finer grained, highly magnetic sediments contain high proportions of planktic diatoms indicative of cold, oligotrophic limnic conditions. Sediment with lower magnetite content contains populations of diatoms indicative of warmer, eutrophic limnic conditions. During the latter part of oxygen isotope stage 3 (about 37–25 ka), the magnetic properties record millennial-scale variations in glacial-flour content. The input of glacial flour was uniformly high during the Last Glacial Maximum, between about 21 and 16 ka. At about 16 ka, magnetite input, both absolute and relative to hematite, decreased abruptly, reflecting a rapid decline in glacially derived detritus. The decrease in magnetite transport into the lake preceded declines in pollen from both grass and sagebrush. A more gradual decrease in heavy mineral content over this interval records sediment starvation with the growth of marshes at the margins of the lake and dilution of detrital material by biogenic silica and other organic matter.     

A COMPARISON OF HYDROLOGY AND VEGETATION BETWEEN A CHANNELIZED STREAM AND A NONCHANNELIZED STREAM IN WESTERN TENNESSEE

The purpose of this study was to provide baseline data on floodplain forest structure, composition, and function that would be needed to predict and monitor the consequences of a proposed stream restoration project. This project would involve the “dechannelization” of Stokes Creek, a stream in western Tennessee that was channelized and leveed in the first half of the 1900s. To this end, we collected data on surface hydrology, soil redox potential (Eh), and the structure and composition of the floodplain vegetation of Stokes Creek. To place our findings into a regional context, we also collected comparable vegetation data from plots located along a nonchannelized stream reach of the Wolf River near Moscow, Tennessee. While hydrologic fluctuations of floodplain sites were synchronous with river dynamics for the Wolf River, the hydrology of floodplain sites at Stokes Creek was constrained by the influence of beaver dams, backflooding, and ponding of overland flow behind levees. Consequently, composition of the forest overstory, understory, and herbaceous strata was significantly different between the two sites. For example, Stokes Creek had a noticeable lack of cypress and tupelo sites, and a greater abundance of red maple. Analyses of size-class structure and woody debris quantity reinforced the existing differences between the more natural and human-impacted systems. While the current hydrology apparently has a negative affect on bottomland hardwoods, scattered regeneration stems and soil redox measurements indicate that a dechannelization effort that yielded lower water tables in the Stokes Creek floodplain potentially could increase bottomland hardwood establishment. [Key words: channelization, western Tennessee, bottomland hardwoods, hydrology.]     

An evolutionary algorithm for multicriteria path optimization problems

For many years researchers and decision makers (DMs) faced with multicriteria shortest path problems (MSPPs) have resorted to reductions to the classical shortest path problem (SPP) by means of weighted linear combinations of the criteria. Algorithmic and approximation schemes are available to solve MSPPs but these approaches often display complexities prohibitive to their implementation on real‐world applications. This paper describes the development of an Evolutionary Algorithm (EA) approach to MSPPs on networks with multiple independent criteria. The EA approach is shown to sufficiently explore the underlying network space, generate large candidate path sets, and evolve high quality approximations to the optimal MSPP solution(s). Opportunities for early termination of the EA in time‐critical applications are also offered. Among the issues for further work is the integration of the EA as a tool within a GIS for path optimization.     

Putting Japanese investment in Europe in its place

Summary Research on Japanese economic activity in Europe concentrates almost exclusively on investment in manufacturing. However, this paper demonstrates that this emphasis both underestimates the longevity of Japanese direct investment in Europe and also grossly underdefines the importance of services. Not only does Japanese direct investment have a much longer history in Europe than is usually recognized but also—and perhaps more significantly—the bulk of that investment is not in manufacturing production per se but in a variety of circulation services. Using establishment-level data, this paper shows that the spatial manifestation of these circulation services is very different from that of manufacturing production.     

The spatial ecology of deer–vehicle collisions

Deer–vehicle collisions (DVCs) are a constant problem in North America that cost millions of dollars of damage and loss of human life. This study investigated the spatial relationship of DVCs for a county in western Indiana using nearest neighbor analysis, chi-square test of independence, and a landscape metric: the percentage of like adjacencies. The study was able to show that DVCs are not randomly located, and that habitat type and structure may play an important role in the location of DVCs.