四川省汶川大地震成因及次生灾害

2008年5月12日14时28分,四川阿坝藏族羌族自治州境内的汶川县（31°N,103．4°E）发生了里氏8．0级浅源地震。震区范围长240km,宽30km,等震线呈长椭圆形,长轴为北东向,震中烈度约为10度,深度为12～19km。震区涉及四川绵阳市北川,德阳、汶川,成都、都江堰、广元、重庆以及甘肃、云南、陕西、河南等地区。除了吉林、黑龙江和新疆地区外,全国都有震感。在北川、汶川等多地区出现次生灾害。地震的发震构造是龙门山构遣带中央断裂带。     

河北丰宁招兵沟铁磷矿床地质及综合利用前景

河北丰宁招兵沟铁磷矿床为赋存于太古宇绿岩带内低品位特大型矿床。含磷岩系具近似绿岩带下部火山岩群的特点。铁磷矿体呈层状,大的透镜状产出,还伴生Ti、V 等有益元素。矿石选矿回收性能良好。通过对该区当前内生低品位铁磷矿开采情况的调查,认为我国北方低品位铁磷矿综合利用前景乐观。     

鄂尔多斯盆地镇泾区块延长组长8油层组砂岩储层特征

延长组长8 油层组是鄂尔多斯盆地镇泾区块的主力油层之一,岩性以岩屑长石砂岩和长石岩屑砂岩为主,为典型的 特低孔特低渗储层。储集空间以次生溶蚀粒间孔为主,喉道以缩颈型、片状和弯片状为主,孔喉结构发育3 种类型,以II 型为主。长8 砂岩储层特征主要受沉积作用、成岩作用、裂缝发育程度和油气充注4 个因素控制。最有利于储层发育的沉积 微相为水下分流河道,且中砂岩的储集物性好于细砂岩,富含石英、长石和变质岩岩屑的砂岩的储集物性好于火成岩岩屑、 沉积岩岩屑和云母含量高的砂岩。成岩作用对储集物性的影响具有双重性,建设性成岩作用包括溶解和孔隙衬里绿泥石胶 结作用2 种,两者均很发育的层段是油气储集的最有利地带;破坏性成岩作用主要包括机械压实作用和晚期亮晶方解石胶 结作用。裂缝以白垩纪末- 古近纪的构造裂缝为主,其使长8 储层渗透率急剧增大,储层非均值性增强。油气充注对储集 物性的影响主要表现为促进溶解作用的发生以及次生孔隙的形成和保存。     

湘江竹埠港段河床沉积物元素地球化学特征

湘江是我国重金属污染最严重的河流之一。本次工作利用X射线荧光(XRF)和电感耦合等离子质谱(ICP-MS)分析技术,对湘江竹埠港沉积物进行主量和微量元素分析。结果表明沉积物主量元素含量变化相对稳定,富集Mn O、P2O5、Fe2O3、Al2O3,亏损Ca O、Na2O。微量元素含量变化较大,亏损Ba、Sc、Mn、Sr而富集其他微量元素。对主量元素和稀土元素进行了分析,表明沉积物物源主要是由上游花岗岩风化所提供。对沉积物进行因子分析和相关性分析,表明沉积物源主要以陆源碎屑为主,并有磷灰石和软锰矿等自生副矿物,Ni、Pb、Cu可能来自人为污染源。地累积指数表明Ba为清洁无污染,重金属V、Cr、Co、Ni、Th、U为轻度污染,重金属Cu、Pb、Zn为偏中度污染,Mn为中度污染,Sc为偏重度污染。其中重金属Cr、Ni、Cu、Pb、Zn、Mn、Sc污染应引起关注。     

安徽女山单斜辉石巨晶的地球化学

本文研究了安徽女山14个单斜辉石巨晶。它们属于铝普通辉石、透辉石和铁钠造辉石。主要元素、稀土和微量元素及同位素特征表明：它们是同一碱性玄武岩浆在幔源条件下不同程度结晶分异的产物，相对于寄主岩均属捕虏晶，可能自中生代即已开始形成。     

湘西洛塔表层岩溶泉的生态环境类型及水文特征

岩溶石山区表层岩溶带的调蓄功能可有效控制石漠化的加剧并为严重缺水地区提供饮用水。文章以湖南洛塔为例,在大量的野外调查基础上,通过对洛塔岩溶区表层岩溶系统生态环境与表层岩溶泉水文特征的对比研究,按生态环境属性将表层岩溶泉分为三种主要类型:森林环境表层岩溶泉、石漠化环境表层岩溶泉及石漠化-森林过渡环境表层岩溶泉。详细论述上述三种表层岩溶泉的发育条件与水文特征:森林环境表层岩溶泉具有持续稳定的水文动态与流量;石漠化环境表层岩溶泉流量与降雨量相对应,动态极不稳定;石漠化与森林过渡环境表层岩溶泉流量排泄峰值具有随泉域植被覆盖率增加而缓和的趋势。按照环境类型对表层岩溶泉进行分类,可直观地显示其特殊的水文特征,有助于岩溶泉的合理开发和综合利用。     

宁芜陶村磁铁矿矿床成矿流体及成矿作用

陶村磁铁矿矿床位于长江中下游成矿带宁芜盆地中段,矿床地质特征及岩浆构造背景与Kiruna型磷灰石-铁氧化物矿床相似。本文在野外工作基础上,通过流体包裹体测温和氢氧硫同位素研究,探讨该矿床成矿流体性质、来源及成矿作用。陶村主要矿石类型为浸染状和脉状磁铁矿,脉状矿石形成稍晚。通过包裹体显微测温获得:磷灰石中包裹体的均一温度集中在210~390℃,盐度集中在15%~23%NaCl_(eqv);石英中包裹体的均一温度集中在330~390℃,盐度主要集中在9%~13%NaCl_(eqv),此外还存在部分高盐度原生包裹体。石英的δD为-96‰~-54‰,δ~(18)O_(H2O)除了一个为8.3‰,其余为1.9‰~4.0‰,指示原始成矿流体为岩浆来源,后期有地表水加入。黄铁矿δ~(34)S为4.8‰~9.3‰,平均值为7.4‰,综合中段地区硫同位素资料,认为成矿流体中的硫来自三叠纪膏盐层与岩浆硫的混合。结合矿床地质特征,陶村成矿作用过程可概括为:岩浆出溶形成的高温含矿气液同化三叠纪膏盐层,带入SO_4~(2-)、Cl~-、Na~+等矿化剂;这种高温气液在岩体内以钠质交代形式富集Fe后,于岩体上部形成浸染状磁铁矿,岩体顶部和边部断裂部位形成(网)脉状磁铁矿。     

Cracking mechanisms during galena mineralization in a sandstone-hosted lead–zinc ore deposit: case study of the Jinding giant sulfide deposit, Yunnan, SW China

There are two types of lead–zinc ore bodies, i.e., sandstone-hosted ores (SHO) and limestone-hosted ores (LHO), in the Jinding giant sulfide deposit, Yunnan, SW China. Structural analysis suggests that thrust faults and dome structures are the major structural elements controlling lead–zinc mineralization. The two types of ore bodies are preserved in two thrust sheets in a three-layered structural profile in the framework of the Jinding dome structure. The SHO forms the cap of the dome and LHO bodies are concentrated beneath the SHO cap in the central part of the dome. Quartz, feldspar and calcite, and sphalerite, pyrite, and galena are the dominant mineral components in the sandstone-hosted lead–zinc ores. Quartz and feldspar occur as detrital clasts and are cemented by diagenetic calcite and epigenetic sulfides. The sulfide paragenetic sequence during SHO mineralization is from early pyrite to galena and late sphalerite. Galena occurs mostly in two types of cracks, i.e., crescent-style grain boundary cracks along quartz–pyrite, or rarely along pyrite–pyrite boundaries, and intragranular radial cracks in early pyrite grains surrounding quartz clasts. The radial cracks are more or less perpendicular to the quartz–pyrite grain boundaries and do not show any overall (whole rock) orientation pattern. Their distribution, morphological characteristics, and geometrical relationships with quartz and pyrite grains suggest the predominant role of grain-scale cracking. Thermal expansion cracking is one of the most important mechanisms for the generation of open spaces during galena mineralization. Cracking due to heating or cooling by infiltrating fluids resulted from upwelling fluid phases through fluid passes connecting the SHO and LHO bodies, provided significant spaces for crystallization of galena. The differences in coefficients of thermal expansion between pyrite and quartz led to a difference in volume changes between quartz grains and pyrite grains surrounding them and contributed to cracking of the pyrite grains when temperature changed. Combined thermal expansion and elastic mismatch due to heating and subsequent cooling resulted in the radial and crescent cracking in the pyrite grains and along the quartz–pyrite grain boundaries.     

Carboniferous Post-collisional Rift Volcanism of the Tianshan Mountains, Northwestern China

The Tianshan Carboniferous post-collisional rift volcanic rocks occur in northwestern China as a large igneous province. Based on petrogeochemical data, the Tianshan Carboniferous post-collisional rift basic lavas can be classified into two major magma types: (1) the low-Ti/Y type situated in the eastern-central Tianshan area, which exhibits low Ti/Y (<500), Ce/Yb (<15) and SiO2 (43-55%), and relatively high Fe2O3T (6.4-11.5%); (2) the high-Ti/Y type situated in the western Tianshan area, which has high Ti/Y (>500), Ce/Yb (>11) and SiO2 (49-55%), and relatively low Fe2O3T (5.8-7.8%). Elemental data suggest that chemical variations of the low-Ti/Y and high-Ti/Y lavas cannot be explained by fractional crystallization from a common parental magma. The Tianshan Carboniferous basic lavas originated most likely from an OIB-like asthenospheric mantle source (87Sr/86Sr(t) ≈ 0.703-0.705, εNd(t) ≈ +4 to +7). The crustal contamination and continental lithospheric mantle have also contributed significantly to the formation of the basic lavas of the Tianshan Carboniferous post-collisional rift. The silicic lavas were probably generated by partial melting of the crust. The data of this study show that spatial petrogeochemical variations exist in the Carboniferous post-collisional rift volcanics province in the Tianshan region. Occurrence of the thickest volcanics dominated by tholeiitic lavas may imply that the center of the mantle-melting anomaly (mantle plume) was in the eastern Tianshan area at that time. The basic volcanic magmas in the eastern Tianshan area were generated by a relatively high degree of partial melting of the mantle source around the spinel-garnet transition zone, whereas the alkaline basaltic lavas are of the dominant magma type in the western Tianshan area, which were generated by a low degree of partial melting of the mantle source within the stable garnet region, thus the basic lavas of the western Tianshan area might have resulted from relatively thick lithosphere and low geothermal gradient.     

塔里木河下游不同生活型植被对地表的防护效果

在干旱区植被生态建设过程中,需要进行决策并经常引起争论的问题是,究竟应该选择哪种生活型植被才能获得最大的防护效果.为比较不同生活型植被对地表防护效果的差异,本文选取塔里木河下游6种常见乔灌草植被,以降低风速百分比的平均值作为植被对地表防护效果的评价指标,对不同生活型植被对地表防护效果进行定量比较.结果表明:上述6种植被防风性能大小次序依次为:花花柴>罗布麻>骆驼刺>柽柳>盐穗木>胡杨.花花柴对地表防护效果最好,降低地表风速百分比的平均值达44.00%,胡杨对地表防护效果最差,降低地表风速百分比平均值13.21%.就乔、灌、草不同生活型植被而言,防护效果大小次序为:多年生草本>灌木>乔木.因此,从生态防护效应角度来说,在干旱区植被生态建设中,应坚持灌、草先行的原则,乔木植被只能在水分条件较优越的地区适度发展.只有这样才能充分利用有限的水资源, 取得最佳的生态防护效应.