Observations of OH maser lines at an 18-cm wavelength in 9P/Temper1 and Lulin C/2007 N3 comets with RT-22 at the Crimean Astrophysical Observatory

Investigations on OH maser lines in comets have been performed with the RT-22 at CrAO. The results of observations of 9P/Temper1 and Lulin C/2007 N3 comets in the OH molecule line at a wavelength of 18 cm are presented. An original technique for observation data analysis has been developed. The gas production rate of OH molecules in these comets is estimated.     

Petrography and provenance of Laecanius Amphorae from Istria,northern Adriatic region,Croatia

Amphorae sherds from the Laecanius workshop of Roman Istria (10–5 B.C. and 78 A.D.), Croatia, were studied by integrating archaeological and geological techniques including fabric analysis, thin‐section petrography, X‐ray diffractometry (XRD), and heavy mineral analysis. The fabric of the sherds showed distinctive characteristics, permitting their classification and allocation into nine fabric groupss. Petrography revealed that quartz is the dominant clastic component, whereas carbonate is common as temper; XRD provided information on firing temperatures that ranged between 750 and 900°C. The sherds contain diverse heavy mineral suites with generally high epidote and garnet proportions; zircon is occasionally important. Garnet/epidote ratios and the presence of diagnostic species (pyroxene, hornblende) showed systematic variations that coincided with similar variations in fabric characteristics. Heavy mineral signatures of amphorae produced in other workshops proved essential in differentiating them from Laecanius sherds. A comparative heavy mineral analysis of terra rossa samples from the vicinity of the workshop indicated that terra rossa was the major source for the paste. Differences observed in the heavy mineral composition of the sherds and terra rossa were interpreted by the spatial heterogeneity of the latter and the mixing of the paste with sandy temper. Fresh Adriatic sponge spicules in the majority of Laecanius sherds and the temper‐derived, generally immature heavy mineral assemblages suggest that sandy deposits from the Adriatic were used for the clastic temper. © 2006 Wiley Periodicals, Inc.     

Rock salt mass in the Paleoproterozoic sequence of the Onega trough in Karelia (from the Onega parametric well data)

A thick (200 m) rock salt mass covering Late Archean granitoids was exposed for the first time in the Early Proterozoic volcanogenic-sedimentary formations in the Onega trough of the east Baltic Shield by the Onega parametric well. The mineral composition of salts, their geochemical features, and the isotopic composition of carbonate carbon and oxygen have been studied. After fluid inclusions present in salts, their metamorphism temperature and isotopic composition of helium and argon were determined. The obtained results give evidence of the fact that rock salts and magnesites associated with them were formed in an evaporate basin with participation of deep crustal processes. The age of the underlying granitoids (2.716 ± 9 Ma) is determined using the Pb—Pb method.     

The Karoo Basin of South Africa: type basin for the coal-bearing deposits of southern Africa

The coal-bearing sediments and coal seams of the Karoo Basin, Southern Africa are described and discussed. The Karoo Basin is bounded on its southern margin by the Cape Fold Belt, onlaps onto the Kaapvaal Craton in the north and is classified as a foreland basin. Coal seams are present within the Early Permian Vryheid Formation and the Triassic Molteno Formation.The peats of the Vryheid Formation accumulated within swamps in a cool temperate climatic regime. Lower and upper delta plain, back-barrier and fluvial environments were associated with peat formation. Thick, laterally extensive coal seams have preferentially accumulated in fluvial environments. The coals are in general inertinite-rich and high in ash. However, increasing vitrinite and decreasing ash contents within seams occur from west to east across the coalfields. The Triassic Molteno coal seams accumulated with aerially restricted swamps in fluvial environments. These Molteno coals are thin, laterally impersistent, vitrinite-rich and shaly, and formed under a warm temperate climatic regime.Palaeoclimate, depositional systems, differential subsidence and basin tectonics influence to varying degrees, the maceral content, thickness and lateral extent of coal seams. However, the geographic position of peat-forming swamps within a foreland basin, coupled with basin tectonics and differential subsidence are envisaged as the primary controls on coal parameters. The Permian coals are situated in proximal positions on the passive margin of the foreland basin. Here, subsidence was limited which enhanced oxidation of organic matter and hence the formation of inertinitic coals. The coals in this tectonic setting are thick and laterally extensive. The Triassci coals are situated within the tectonically active foreland basin margin. Rapid subsidence and sedimentation rates occurred during peat formation which resulted in the preservation of thin, laterally impersistent, high ash, vitrinite-rich, shaly coals.     

Schorlomite: a discussion of the crystal chemistry, formula, and inter-species boundaries

Examination of schorlomite from ijolite at Magnet Cove (USA) and silicocarbonatite at Afrikanda (Russia), using electron-microprobe and hydrogen analyses, X-ray diffraction and Mössbauer spectroscopy, shows the complexity of substitution mechanisms operating in Ti-rich garnets. These substitutions involve incorporation of Na in the eightfold-coordinated X site, Fe²⁺ and Mg in the octahedrally coordinated Y site, and Fe³⁺, Al and Fe²⁺ in the tetrahedrally coordinated Z site. Substitutions Ti⁴⁺Fe³⁺Fe³⁺_–1Si_–1 and Ti⁴⁺Al³⁺Fe³⁺_–1Si_–1 are of major significance to the crystal chemistry of schorlomite, whereas Fe²⁺ enters the Z site in relatively minor quantities (<3% Fe). There is no evidence (either structural or indirect, such as discrepancies between the measured and calculated Fe²⁺ contents) for the presence of ^[6]Ti³⁺ or ^[4]Ti⁴⁺ in schorlomite. The simplified general formula of schorlomite can be written as Ca₃Ti⁴⁺₂[Si_3-x(Fe³⁺,Al,Fe²⁺)_xO₁₂], keeping in mind that the notion of end-member composition is inapplicable to this mineral. In the published analyses of schorlomite with low to moderate Zr contents, x ranges from 0.6 to 1.0, i.e. Ti⁴⁺ in the Y site is <2 and accompanied by appreciable amounts of lower-charged cations (in particular, Fe³⁺, Fe²⁺ and Mg). For classification purposes, the mole percentage of schorlomite can be determined as the amount of ^[6]Ti⁴⁺, balanced by substitutions in the Z site, relative to the total occupancy in the Y site: (^[6]Ti⁴⁺–^[6]Fe²⁺–^[6]Mg²⁺– ^[8]Na⁺)/2. In addition to the predominant schorlomite component, the crystals examined in this work contain significant (>15 mol.%) proportions of andradite (Ca₃Fe³⁺₂Si₃O₁₂), morimotoite (Ca₃Fe²⁺TiSi₃O₁₂), and Ca₃MgTiSi₃O₁₂. The importance of accurate quantitative determination and assignment of Fe, Ti and other cations to the crystallographic sites for petrogenetic studies is discussed.

Free convection effects on the oscillatory flow in the Stokes's problem past an infinite porous vertical limiting surface with constant suction — I

An analysis of Rayleigh's problem (also Stokes's problem) for the flow of a viscous fluid (e.g. of a stellar atmosphere) past an impulsively started infinite, vertical porous limiting surface (e.g. of a star) with constant suction, when the free stream velocity oscillates in time about a constant mean, has been carried out. On solving the coupled non-linear equations in approximate way, expressions for the mean velocity, the mean temperature, the mean skin-friction and the mean rate of heat transfer, expressed in terms of Nusselt number, are obtained. The effects of Grashof numberG, Eckert numberE and Prandtl numberP, on these quantities, is discussed for the cases of an externally heating and cooling of the limiting surface, by the free convection currents, and the variations of them are shown graphically.     

Mantle(?) xenoliths in the carbonatites of northern Transbaikalia

The composition and nature of high-Cr minerals in lithic clasts from the carbonatites of the Veseloe occurrence, northern Transbaikalia, were considered. In order to determine their source, the Cr-bearing phases were compared with chromite, magnetite, and rutile from ultrabasic rocks, mantle xenoliths, and eclogites. It was suggested that the xenoclasts studied were formed at great depths, whereas the carbonatites were directly derived from the mantle rather than formed by the crustal differentiation of a silicate-carbonate melt.     

Rock warming and drying under simulated intertidal conditions,part II: weathering and biological influences on evaporative cooling and near‐surface micro‐climatic conditions as an example of biogeomorphic ecosystem engineering

The way in which rocks and engineering materials heat‐up and dry‐out in the intertidal zone is of relevance to both weathering and ecology. These behaviours can be measured in the laboratory under controlled conditions designed to replicate those occurring in the field. Previous studies have demonstrated differences in thermal behaviours between rock types and through time as a result of soiling in terrestrial environments, but the influence of weathering and colonization on rock behaviours in the intertidal zone has not been previously assessed. We measured the warming and drying of blocks of rock (limestone and granite) and marine concrete during ‘low‐tide’ events simulated in the laboratory, before and after a period of exposure (eight months) on rock platforms in Cornwall, UK. As well as differences between the material types, temperatures of control (unexposed) and field‐exposed blocks differed in the order of 1 to 2 °C. Drying behaviours were also different after field exposure. Differences during the first few hours of exposure to air and heat were attributed to discolouration and albedo effects. Over longer periods of time, changes in the availability of near‐surface pore water as a result of micro‐scale bioerosion of limestone and the development of bio‐chemical crusts on marine concrete [observed using scanning electron microscopy (SEM)] are suggested as mechanisms enhancing and reducing, respectively, the efficiency of evaporative cooling. The retention of moisture by epilithic biofilms may also influence thermal and drying behaviours of granite. These observations represent one of the first examples of cross‐scalar biogeomorphic linkages in the intertidal zone. The significance of the results for the subsequent efficiency of weathering, and near‐surface micro‐climatic conditions experienced by colonizing organisms is discussed. The involvement of microorganisms in the creation of more (or less) ecologically stressful conditions through the alteration of substratum geomorphic properties and behaviours is suggested as an example of ‘biogeomorphic ecosystem engineering’. Copyright © 2011 John Wiley & Sons, Ltd.