Limitations and feasibility of the land disposal of organic solvent-contaminated wastes

The limitations and feasibility of the land disposal of solid wastes containing organic solvents and refrigerants (chlorinated fluorocarbons) were investigated by evaluating the attenuation capacity of a hypothetical waste-disposal site by numerical modeling. The basic theorem of this approach was that the land disposal of wastes would be environmentally acceptable if subsurface attenuation reduced groundwater concentrations of organic compounds to concentrations that were less than health-based, water-quality criteria. Computer simulations indicated that the predicted concentrations of 13 of 33 organic compounds in groundwater would be less than their health-based criteria. Hence, solid wastes containing these compounds could be safely disposed at the site. The attenuation capacity of the site was insufficient to reduce concentrations of four compounds to safe levels without limiting the amount of mass available to leach into groundwater. Threshold masses based on time-dependent migration simulations were estimated for these compounds. The remaining 16 compounds, which consisted mainly of chlorinated hydrocarbons and fluorocarbons could not be safely landfilled without severe restrictions on the amounts disposed. These organic compounds were candidates to ban from land disposal.     

IGU Commission on Health and Developement

The International Geographical Union Reports

IGU Commission on Population Geography     

Occurrence of thorite and radioactive zircon in syenite pegmatite,North of Ashwaraopet,Khammam district,Andhra Pradesh,India

This paper reports the occurrence of thorite and confirms the earlier find of radioactive zircon by Subbarao, Murali and others from syenite pegmatite in the Vinayakapuram-Kunavaram alkaline belt in the Khammam district of Andhra Pradesh, India. Thorite has also been found as residual concentrations in soil overlying the pegmatite.     

A simplified computational approach for prediction of transient climatic conditions in underground mine airways

Summary A simplified approach for prediction of transient climatic conditions in an underground airway os presented. The dry surface temperature of the airway is calculated using a finite difference scheme, whereas the wet surface temperature is determined following the concept of pseudo-base-temperature of air and using the value of thermal gradient at the dry surface as obtained from the finite difference solution of the temperature profile in the dry rock. The air-current temperatures are regularly evaluated after a suitable time span so as to simulate a real-case situation, and the re-evaluated air-current temperatures are used for further calculations. For increasing age of the airway the wet surface temperature obtained by the finite difference scheme, with an appropriate value of thermal diffusivity, is compared with its value determined by the pseudo-base-temperature approach.     

Dissolved oxygen variations in alpine glacial meltwaters

Recent models of chemical weathering in alpine glacial meltwaters suggest that sulphide oxidation is a major source of solute in the distributed component of the subglacial hydrological system. This reaction requires O₂, and may lower dissolved oxygen levels to below saturation with respect to the atmosphere. This should result in an inverse association between SO₇^2- and dissolved oxygen saturation. However, measurements of O₂ saturation in bulk meltwaters draining the Haut Glacier d'Arolla, Switzerland, show that there is a positive association between SO₄^2- and O₂ saturation. The O₂ content of glacial meltwaters depends on the initial content of snow and icemelt, which may be controlled by the rate of melting, and the kinetic balance between O₂ losses (e.g. sulphide oxidation, microbial respiration) and gains (e.g. diffusion of O₂ into solution).     

Estimation of sector roughness lengths and the effect on prediction of the vertical wind speed profile

An estimate of roughness length is required by some atmospheric models and is also used in the logarithmic profile to determine the increase of wind speed with height under neutral conditions. The choice of technique for determining roughness lengths is generally constrained by the available input data. Here, we compare sets of roughness lengths derived by different methods for the same site and evaluate their impact on the prediction of the vertical wind speed profile.Wind speed and direction data have been collected at four heights over a three-year period at the North Norfolk Wind Monitoring Site. Wind speed profiles were used to generate sector roughness lengths based on the logarithmic profile formula. This is the only direct way of determining roughness lengths. The simplest and cheapest method is to use maps with published tables giving roughness length estimates for different terrain types. Alternatively Wieringa (1976, 1986) and Beljaars (1987) give formulae for determining roughness lengths from wind speed gusts or standard deviations.The four sets of estimated roughness lengths vary considerably. They were used to estimate 34 m wind speeds from 12.7 m observations. The profile-derived roughnesses are used simply as a check on the prediction of the wind speed profiles. The terrain-derived roughness lengths give reasonable results. Gust-derived and standard deviation roughnesses both predict wind speeds which are lower than the observed ones. The error is greater in the case of standard deviation roughnesses. If stability corrections are applied in the prediction of the vertical wind speed profile, the results are considerably improved.     

Characterisation of ecological parameters in tropical forest community—A remote sensing approach

Satellite Remote Sensing data has been used for vegetation mapping, initial stratification, distribution of sample plots and for calculating the area under different vegetation types. Primary and secondary analyses of vegetation has been done using phytosociological ground data collected from sample piots to assess the ecological importance of different species. Interrelationships among different communities have been evaluated through various available indices. The spatial distribution and vegetation analysis indicate that commercial extraction of natural forests of Andaman has set in retrogression. The evergreen forests subjected to shorter rotation of commercial exploitation are being invaded with seral deciduous species. The study highlights the status of forests (spatial and community) and stresses the need to conserve germplasm present in the natural evergreen forests.     

Factors Affecting Efficient Aquifer Restoration at In Situ Uranium Mine Sites

In situ mining of uranium typically requires the injection of a reactive leaching solution (lixiviant) such as sodium carbonate/bicarbonate, ammonium carbonate/bicarbonate, or sulfuric acid, and an oxidant such as hydrogen peroxide or oxygen into an ore-bearing, confined aquifer. It also requires the environmental restoration of the source aquifer. The stratigraphy of sandstone uranium deposits typically consists of interbedded layers of poorly consolidated sands and clays and gravels deposited in fluvial or coastal environments. The parameters that influence the migration of lixiviant during mining and restoration in these environments include induced hydraulic gradients, hydrodynamic dispersion, heterogeneity, anisotropy, physicochemical reactions, leakage into and/or through confining layers, and convergence of flow lines due to partial well penetration.
The effectiveness of the various methods of aquifer restoration is sit -specific and is dependent upon the site hydrogeology and hydrogeochemistry, and the chemistry of the lixiviant. Each method of aquifer restoration has advantages and disadvantages. Selection of the most effective and economically feasible method requires detailed knowledge of the site-specific hydrogeologic conditions.     

Volcano hazards program in the United States

Volcano monitoring and volcanic-hazards studies have received greatly increased attention in the United States in the past few years. Before 1980, the Volcanic Hazards Program was primarily focused on the active volcanoes of Kilauea and Mauna Loa, Hawaii, which have been monitored continuously since 1912 by the Hawaiian Volcano Observatory. After the reawakening and catastrophic eruption of Mount St. Helens in 1980, the program was substantially expanded as the government and general public became aware of the potential for eruptions and associated hazards within the conterminous United States. Integrated components of the expanded program include: volcanic-hazards assessment; volcano monitoring; fundamental research; and, in concert with federal, state, and local authorities, emergency-response planning.In 1980 the David A. Johnston Cascades Volcano Observatory was established in Vancouver, Washington, to systematically monitor the continuing activity of Mount St. Helens, and to acquire baseline data for monitoring the other, presently quiescent, but potentially dangerous Cascade volcanoes in the Pacific Northwest. Since June 1980, all of the eruptions of Mount St. Helens have been predicted successfully on the basis of seismic and geodetic monitoring.The largest volcanic eruptions, but the least probable statistically, that pose a threat to western conterminous United States are those from the large Pleistocene-Holocene volcanic systems, such as Long Valley caldera (California) and Yellowstone caldera (Wyoming), which are underlain by large magma chambers still potentially capable of producing catastrophic caldera-forming eruptions. In order to become better prepared for possible future hazards associated with such historically unpecedented events, detailed studies of these, and similar, large volcanic systems should be intensified to gain better insight into caldera-forming processes and to recognize, if possible, the precursors of caldera-forming eruptions.