A parameterisation for the threshold shear velocity to initiate deflation of dry and wet sediment

A new parameterisation for the threshold shear velocity to initiate deflation of dry and wet particles is presented. It is based on the balance of moments acting on particles at the instant of particle motion. The model hence includes a term for the aerodynamic forces, including the drag force, the lift force and the aerodynamic-moment force, and a term for the interparticle forces. The effect of gravitation is incorporated in both terms. Rather than using an implicit function for the effect of the aerodynamic forces as reported earlier in literature, a constant aerodynamic coefficient was introduced. From consideration of the van der Waals force between two particles, it was further shown that the effect of the interparticle cohesion force between two dry particles on the deflation threshold should be inversely proportional to the particle diameter squared. The interparticle force was further extended to include wet bonding forces. The latter were considered as the sum of capillary forces and adhesive forces. A model that expresses the capillary force as a function of particle diameter squared and the inverse of capillary potential was deduced from consideration of the well-known model of Fisher and the Young–Laplace equation. The adhesive force was assumed to be equal to tensile strength, and a function which is proportional to particle diameter squared and the inverse of the potential due to adhesive forces was derived. By combining the capillary-force model and the adhesive force model, the interparticle force due to wet bonding was simplified and written as a function of particle diameter squared and the inverse of matric potential. The latter was loglinearly related to the gravimetric moisture content, a relationship that is valid in the low-moisture content range that is important in the light of deflation of sediment by wind. By introducing a correction to force the relationship to converge to zero moisture content at oven dryness, the matric potential–moisture content relationship contained only one unknown model parameter, viz. moisture content at −1.5 MPa. Working out the model led to a rather simple parameterisation containing only three coefficients. Two parameters were incorporated in the term that applies to dry sediment and were determined by using experimental data as reported by Iversen and White [Sedimentology 29 (1982) 111]. The third parameter for the wet-sediment part of the model was determined from wind-tunnel experiments on prewetted sand and sandy loam aggregates. The model was validated using data from wind-tunnel experiments on the same but dry sediment, and on data obtained from simulations with the model of Chepil [Soil Sci. Soc. Am. Proc. 20 (1956) 288]. The experiments showed that soil aggregates should be treated as individual particles with a density equal to their bulk density. Furthermore, it was shown that the surface had to dry to a moisture content of about 75% of the moisture content at −1.5 MPa before deflation became sustained. The threshold shear velocities simulated with our model were found to be in good agreement with own observations and with simulations using Chepil's model.     

Enhancing the value of adaptation reporting as a driver for action: lessons from the UK

ABSTRACT

As increasing evidence shows that the risks of climate change are mounting, there is a call for further climate action (both reducing global emissions, and adaptation to better manage the risks of climate change). To promote and enable adaptation, governments have introduced, or are considering introducing, reporting on climate risks and efforts being taken to address those risks. This paper reports on an analysis of the first two rounds of such reports submitted under the UK Climate Change Act (2008) Adaptation Reporting Power. It highlights benefits and challenges for reporting authorities and policymakers receiving the reports that could also inform other countries considering such reporting. For reporting authorities, benefits arise from the reporting process and resulting reports. These benefits include elevating climate risks and adaptation to the corporate level and with stakeholders, alongside facilitating alignment and integration of actions within existing risk management and governance structures. For policymakers, reporting provides enhanced understanding of climate risks and actions from a bottom-up perspective that can be integrated into national-level assessments and adaptation planning processes. The identified challenges are those related to capacity and process. These include limited risk and adaptation assessment capacities; relevance of climate change risks and adaptation in the context of other urgent risks and actions; reporting process effectiveness and robustness; and the provision of effective and sufficiently comprehensive support, including feedback.

Key policy insights

• Effective adaptation reporting needs to be designed and delivered so as to enhance the value of the reporting process and resulting reports both for those reporting and those receiving the reports, as well as from the broader policy perspective.

• Providing a positive and supportive reporting environment is critical to encourage participation and facilitating contiuous learning and improvement, while also facilitating delivery of policy-relevant adaptation reports.

• Contributions of adaptation reporting can be enhanced by an inclusive reporting requirement involving a broader organizational mix that enables more effective risk management and reporting that reflects associated (inter)dependencies and consistency with the more comprehensive post-2015 resilience agenda (Paris Agreement, Sendai Framework for DRR and UN Agenda 2030 SDGs).

     

REGIONAL VARIATIONS IN DENOMINATIONAL SWITCHING AMONG WHITE PROTESTANTS*

This study examines the hypothesis that the determinants of denominational switching vary regionally among white American Protestants. Data for the analysis are taken from the National Opinion Research Center's General Social Survey for 1974 through 1984. Using logistic regression, the analysis compares the determinants of switching among respondents residing in the nine Census regions of the U.S. Results reveal significant regional differences in the determinants of switching, especially in the effects of conversion, childhood affiliation and interdenominational marriage.     

Refining the ice flow chronology and subglacial dynamics across the migrating Labrador Divide of the Laurentide Ice Sheet with age constraints on deglaciation

The Laurentide Ice Sheet was characterized by a dynamic polythermal base. However, important data and knowledge gaps have led to contrasting reconstructions in areas such as the Labrador Ice Divide. In this study, detailed fieldwork was conducted at the southeastern edge of a major landform boundary to resolve the relative ice flow chronology and constrain the evolution of the subglacial dynamics, including the migration and collapse of the Labrador Ice Divide. Surficial mapping and analysis of 94 outcrop‐scale ice flow indicators were used to develop a relative ice flow chronology. ¹⁰Be exposure ages were used with optical ages to confine the timing of deglaciation within the study area. Four phases of ice flow were identified. Flow 1 was a northeasterly ice flow preserved under non‐erosive subglacial conditions associated with the development of an ice divide. Flow 2 was a northwest ice flow, which we correlate to the Ungava Bay Ice Stream and led to a westward migration of the ice divide, preserving Flow 2 features and resulting in Flow 3's eastward‐trending indicators. Flow 4 is limited to sparse fine striations within and around the regional uplands. The new optical ages and ¹⁰Be exposure ages add to the regional geochronology dataset, which further constrains the timing of ice margin retreat in the area to around 8.0 ka. Copyright © 2019 The Authors. Journal of Quaternary Science Published by John Wiley & Sons Ltd.     

Uranium depositional controls at the Prairie Flats surficial uranium deposit, Summerland, British Columbia

A hydrological and geochemical investigation of the Prairie Flats surficial uranium deposit in Summerland, BC was undertaken to identify the principal controls on uranium deposition. A network of piezometers was installed and used to measure the hydraulic conductivities of the host sediments as well as the general flow direction and aqueous geochemistry of the resident groundwaters. Two hydrostratigraphic units were identified: a peat and clay unit overlying a sand and gravel unit. Measured hydraulic conductivities were on the order of 10^-7 and 10^-5 m/s, respectively, and the vertical hydraulic gradients indicate significant groundwater discharge upward into the peat and clay unit. Prairie Flats groundwaters are neutral to alkaline in pH, enriched in Ca²⁺ and HCO₃^-, and have dissolved uranium concentrations ranging from 10 to nearly 1,000 µg/l. Groundwater flow and geochemistry data were used to estimate the flux of uranium in groundwater at the site. A major fraction of the uranium is taken up by adsorption to organics. There is also evidence for subsequent desorption by the formation of soluble complexes with bicarbonate. Uranium that is not held by adsorption is most likely precipitated as uraninite, UO_2(c). Reducing conditions in the peat and clay unit (Eh<0.1 V) relative to the underlying sand and gravel unit (Eh>0.2 V) may explain the high concentrations of uranium nearer ground surface. The current flux of uranium into the flats is significantly smaller than that calculated from the size and age of the deposit, which may be an indication of changing rates of deposition in response to varying climatic and hydrogeologic conditions over time.     

Hydrogen speciation in synthetic quartz

The dominant hydrogen impurity in synthetic quartz is molecular H₂O. H-OH groups also occur, but there is no direct evidence for the hydrolysis of Si-O-Si bonds to yield Si-OH HO-Si groups. Molecular H₂O concentrations in the synthetic quartz crystals studied range from less than 10 to 3,300 ppm (H/Si), and decrease smoothly by up to an order of magnitude with distance away from the seed. OH^? concentrations range from 96 to 715 ppm, and rise smoothly with distance away from the seed by up to a factor of three. The observed OH^? is probably all associated with cationic impurities, as in natural quartz. Molecular H₂O is the dominant initial hydrogen impurity in weak quartz. The hydrolytic weakening of quartz may be caused by the transformation H₂O + Si-O-Si → 2SiOH, but this may be a transitory change with the SiOH groups recombining to form H₂O, and the average SiOH concentration remaining very low. Synthetic quartz is strengthened when the H₂O is accumulated into fluid inclusions and cannot react with the quartz framework.