An asperity model to simulate rupture along heterogeneous fault surfaces

A model has been developed to simulate the statistical and mechanical nature of rupture on a heterogeneous strike-slip fault. The model is based on the progressive failure of circular asperities of varying sizes and strengths along a fault plane subjected to a constant far-field shear displacement rate. The basis of the model is a deformation and stress intensity factory solution for a single circular asperity under a unidirectional shear stress. The individual asperities are unified through the fault stiffness and the far-field stress and displacement. During fault deformation asperities can fail and reheal, resulting in changes in the local stresses in the asperities, stress drops, and changes in the stiffness of the fault. Depending on how the stress is redistributed following asperity failure and on the strenghts of the neighboring asperities an earthquake event can be the failure of one or more asperities. Following an earthquake event seismic source parameters such as the stress drop, energy change, and moment magnitude are calculated. Results from the model show a very realistic pattern of earthquake rupture, with reasonable source parameters, the proper magnitude-frequency behavior, and the development of characteristic earthquakes. Also the progression ofb-values in the model gives some insight into the phenomenon of self-organized criticality.     

Size matters more than method: Visual quadrats vs photography in measuring human impact on Mediterranean rocky reef communities

The performances of two commonly used non-destructive sampling procedures for rocky benthic assemblages (i.e. photography and visually assessed quadrats) were compared. A damaging human activity, date mussel (Lithophaga lithophaga) harvesting (DMH), was chosen. Directly impacted sites were compared with reference conditions (controls). Both visual quadrats and photography were equally able to detect differences between impacted situations and controls. However, visual quadrats showed high variability among replicates and estimated higher species richness for controls, while photography did so for impacts. Pooling photos in a ‘sum photo quadrat’ showed that differences between the two methods are due to sampling unit size rather than sampling procedure itself. As a small sampling unit is unavoidable with photography, visual quadrats should be preferred in investigating shallow rocky reefs for their larger size; however, longer working time underwater with quadrats does not allow for numerous replicates. Pooling many photos to reach sampling sizes comparable with those of quadrats may be a valid alternative to reconcile image resolution and areal coverage.     

Urban seagrass: status of Posidonia oceanica facing the Genoa city waterfront (Italy) and implications for management

A system of five adjacent Posidonia oceanica meadows facing the waterfront of Genoa city (Ligurian Sea, NW Mediterranean) was investigated over different spatial scales (meters-kilometers) using three environmental indices: conservation index (CI), substitution index (SI) and phase-shift index (PSI). CI revealed differences mostly at large spatial scale, distinguishing the poor condition of the meadows closest to Genoa centre and harbour from the comparatively healthy condition of the farthest meadows. SI showed differences mostly at small spatial scale (i.e., within meadows), suggesting the influence of local factors in the re-colonisation of regressed meadows by the seagrass Cymodocea nodosa and/or the invasive alga Caulerpa racemosa. Mapping of PSI showed that the meadows closest to Genoa centre and harbour have undergone a nearly total phase shift and have no real potential for recovery: attempts to re-establish P. oceanica there might be a waste of time and money. On the contrary, the meadows farthest from Genoa centre and harbour showed a comparatively low level of phase shift and could still fully recover given specific management actions.     

ROBUST: The ROle of BUffering capacities in STabilising coastal lagoon ecosystems

“Buffer capacities” has been defined in ecology as a holistic concept (e.g., Integration of Ecosystem Theories: A Pattern, second ed. Kluwer, Dordrecht, 1997, 388pp), but we show that it can also be worked out in mechanistic studies. Our mechanistic approach highlights that “buffering capacities” can be depleted progressively, and, therefore, we make a distinction between current and potential “buffering capacities”. We have applied this concept to understand the limited “local stability” in seagrass ecosystems and their vulnerability towards structural changes into macro-algal dominated communities. We explored the following processes and studied how they confer buffering capacities to the seagrass ecosystem: (i) net autotrophy is persistent in Zostera noltii meadows where plant assimilation acts as a sink for nutrients, this contrasted with the Ulva system that shifted back and forth between net autotrophy and net heterotrophy; (ii) the Z. noltii ecosystem possesses a certain albeit rather limited capacity to modify the balance between nitrogen fixation and denitrification, i.e., it was found that in situ nitrogen fixation always exceeded denitrification; (iii) the nitrogen demand of organoheterotrophic bacteria in the sediment results in nitrogen retention of N in the sediment and hence a buffer against release of nitrogen compounds from sediments, (iv) habitat diversification in seagrass meadows provides shelter for meiofauna and hence buffering against adverse conditions, (v) sedimentary iron provides a buffer against noxious sulfide (note: bacterial sulfide production is enhanced in anoxic sediment niches by increased organic matter loading). On the other hand, in the coastal system we studied, sedimentary iron appears less important as a redox-coupled buffer system against phosphate loading. This is because most inorganic phosphate is bound to calcium rather than to iron. In addition, our studies have highlighted the importance of plant–microbe interactions in the seagrass meadows.     

Sodic Pyroxene and Sodic Amphibole as Potential Reference Materials for In Situ Lithium Isotope Determinations by SIMS

Two large pegmatitic crystals of sodic pyroxene (aegirine) and sodic amphibole (arfvedsonite) from the agpaitic igneous Ilímaussaq Complex, south Greenland were found to be suitable as reference materials for in situ Li isotope determinations. Lithium concentrations determined by SIMS and micro‐drilled material analysed by MC‐ICP‐MS generally agreed within analytical uncertainty. The arfvedsonite crystal was homogeneous with [Li] = 639 ± 51 μg g^?1 (2s, n = 69, MC‐ICP‐MS and SIMS results). The aegirine crystal shows strongly developed sector zoning, which is a common feature of aegirines. Using qualitative element mapping techniques (EPMA), the homogeneous core of the crystal was easily distinguished from the outermost sectors of the crystals. The core had a mean [Li] of 47.6 ± 3.6 μg g^?1 (2s, n = 33) as determined by SIMS. The seven micro‐drilled regions measured by solution MC‐ICP‐MS returned slightly lower concentrations (41–46 μg g^?1), but still overlap with the SIMS data within uncertainty. Based on MC‐ICP‐MS and SIMS analyses, the variation in δ⁷Li was about 1‰ in each of the two crystals, which is smaller than that in widely used glass reference materials, making these two samples suitable to serve as reference materials. There was, however, a significant offset between the results of MC‐ICP‐MS and SIMS. The latter deviated from the MC‐ICP‐MS results by ?6.0 ± 1.9‰ (2s) for the amphibole and by ?3.9 ± 1.9‰ (2s) for the aegirine. This indicates the presence of a significant matrix effect in SIMS determinations of Li isotopes for amphibole and pyroxene relative to the basalt glasses used for calibration. Based on the MC‐ICP‐MS results, mean δ⁷Li values of +0.7 ± 1.2‰ (2s, n = 10) for the arfvedsonite crystal and of ?3.7 ± 1.2‰ (2s, n = 7) for the core of the aegirine crystal were calculated. Adopting these values, SIMS users can correct for the specific IMF (instrumental mass fractionation) of the ion probe used. We propose that these two crystals serve as reference materials for in situ Li isotope determinations by SIMS and pieces of these two crystals are available from the first author upon request.     

Quantitative in situ XRD measurement of shock metamorphism in Martian meteorites using lattice strain and strain‐related mosaicity in olivine

All Martian meteorites have experienced shock metamorphism to some degree. We quantitatively determined shock‐related strain in olivine crystals to measure shock level and peak shock pressure experienced by five Martian meteorites. Two independent methods employing nondestructive in situ micro X‐ray diffraction (μXRD) are applied, i.e., (1) the lattice strain method, in which the lattice strain value (ε) for each olivine grain is derived from a Williamson–Hall plot using its diffraction pattern (peak width variation with diffraction angle) with reference to a best fit calibration curve of ε values obtained from experimentally shocked olivine grains; (2) the strain‐related mosaicity method, allowing shock stage to be estimated by measuring the streaking along the Debye rings of olivine grain diffraction spots to define their strain‐related mosaic spread, which can then be compared with olivine mosaicity in ordinary chondrites of known shock stage. In this study, both the calculated peak shock pressures and the estimated shock stages for Dar al Gani 476 (45.6 ± 0.6 GPa), Sayh al Uhaymir 005/8 (46.1 ± 2.2 GPa), and Nakhla (18.0 ± 0.6 GPa) compare well with literature values. Formal shock assessments for North West Africa 1068/1110 (53.9 ± 2.1 GPa) and North West Africa 6234 (44.6 ± 3.1 GPa) have not been reported within the literature; however, their calculated peak shock pressures fall within the range of peak shock pressures defining their estimated shock stages. The availability of nondestructive and quantitative μXRD methods to determine shock stage and peak shock pressure from olivine crystals provides a key tool for shock metamorphism analysis.     

Seismic performance assessment of “hybrid” structures using two-level multy group GIS oriented approach: case studies

In this paper, a two-level multi-group approach to seismic performance assessment of existing building stock is presented and discussed. The first level of assessment is a simple visual screening based on the principles originally developed in FEMA (Rapid visual screening of buildings for potential seismic hazards: a handbook—FEMA 154 and 155, Applied Technology Council, Redwood City, 2002). The second level of assessment is based on an integrated approach (field survey, geotechnical investigations, experimental testing and analytical investigations) with incorporated procedures of different levels of complexity. The acceptance criteria for assessment are founded on demand versus capacity relationships, defined at element and story level. The developed approach was applied in performance assessment of the existing buildings in Karposh, which is one of the largest and oldest municipalities in Skopje, the capital of the Republic of Macedonia. Rapid visual screening (level_1 activity) was performed for 161 existing buildings. For two selected buildings, level_2 assessment was carried out. The results from the assessment were uploaded into the existing geo-referenced building inventory database on the Karposh municipality that represents a practical tool for the decision makers in enforcing decisions on design and construction of seismically resilient building environment.     

Biogeomorphology of the Mediterranean Posidonia oceanica seagrass meadows

Here we review the multiple interactions between the endemic Mediterranean seagrass, Posidonia oceanica, and coastal geomorphologic processes as an outstanding example of biogeomorphology, taking into account recent advances in the field. Seagrass meadows are among the most important elements for the functioning of marine coastal ecosystems, and represent a major focus for research and conservation. Being considered a priority habitat, P. oceanica meadows are protected by several European Union directives and national laws. In this paper we examine: the role of sedimentary features in controlling the development of the meadows; the interplay between P. oceanica leaf litter (i.e. beached necromass) cast ashore and erosional‐depositional processes on the beaches; the interactions between meadows and nearshore hydrodynamics, and; possible linkages between geomorphological features of the seafloor and the architecture of meadows. Finally, we provide perspectives for future research on P. oceanica and other Mediterranean seagrass meadows in a biogeomorphological context with specific reference to climate change. Copyright © 2016 John Wiley & Sons, Ltd.     

Lea County 001, an H5 chondrite,and Lea County 002, an ungrouped type 3 chondrite

Abstract— A search of active deflation basins near Jal, Lea County, New Mexico resulted in the discovery of two meteorites, Lea County 001 and 002. Lea County 001 has mean olivine and low-Ca pyroxene compositions of Fa₁₉ and Fs₁₇, respectively. These and all other mineralogical and petrological data collected indicate a classification of H5 for this stone. Lea County 002 has mean olivine and low-Ca pyroxene compositions of Fa₂ and Fs₄, and is unequilibrated. Although it is mineralogically most similar to Kakangari and chondritic clasts within Cumberland Falls, the high modal amount of forsterite makes Lea County a unique type 3 chondrite. Oxygen isotope data for Lea County 002 fall on an ¹⁶O-mixing line through those of the enstatite meteorites and IAB irons, a feature shared by Kakangari.