A study of the subarctic boundary region in the Western North Pacific

During autumn 1968 an oceanographic investigation was conducted in the region of the Subarctic boundary between 155°E and 180°. The geostrophic flow of the upper 500 m was remarkably similar in direction; hence the salinity-minimum, Intermediate water must have the same path of flow as water at the surface. A water mass analysis revealed a decrease in the percentage of Subarctic water to the south and east, plus an increase in the homogeneity of water to the east, which supports Reid's conclusions that the salinity minimum results mainly from lateral mixing in the pycnocline in this region. Salinity at the minimum increases toward the south and east, and the density at this level also increases slightly from the western to the central Pacific, perhaps as a result of unequal vertical mixing above and below the minimum.     

Modelling of periodic wave transformation in the inner surf zone

In this paper, we analyse the ability of the nonlinear shallow-water (NSW) equations to predict wave distortion and energy dissipation of periodic broken waves in the inner surf zone. This analysis is based on the weak-solution theory for conservative equations. We derive a new one-way model, which applies to the transformation of non-reflective periodic broken waves on gently sloping beaches. This model can be useful to develop breaking-wave parameterizations (in particular broken-wave celerity expression) in both time-averaged wave models and time-dependent Boussinesq-type models. We also derive a new wave set-up equation which provides a simple and explicit relation between wave set-up and energy dissipation. Finally, we compare numerical simulations of both, the NSW model and the simplified one-way model, with spilling wave breaking experiments and we find a good agreement.     

Trichodesmium erythraeum (Ehrenberg) bloom along the southwest coast of India (Arabian Sea) and its impact on trace metal concentrations in seawater

The incidence of a large scale Trichodesmium erythraeum bloom along the southwest coast of India (Arabian Sea) observed in May 2005 is reported. Around 4802 filaments of T. erythraeum ml⁻¹ seawater was observed and a colony consisted of 3.6 × 10⁵ cells. The bloom was predominant off Suratkal (12° 59′N and 74° 31′E) with a depth of about 47 m, covering an area of 7 km in length and 2 km width. The concentrations of Zinc, Cadmium, Lead, Copper, Nickel and Cobalt were determined in samples collected from the bloom and non-bloom sites using stripping voltammetry. The observed hydrographical and meteorological parameters were found to be favorable for the bloom. The concentrations of Zinc, Cadmium and Nickel were found to be higher at bloom stations, while the concentrations of Lead, Copper and Cobalt were found to be very low at bloom stations. Elevated concentrations of Cadmium and Cobalt were observed at Valappad mainly due to the decomposition of detrital material produced in the bloom. Statistically significant differences (P > 0.01) in metal concentrations between the bloom and non-bloom stations were not observed except for Copper. Metals such as Lead, Copper and Cobalt were removed from the seawater at all places where bloom was observed. Cadmium was found to be slowly released during the decaying process of the bloom.     

Veil over the nets (unravelling corporate liability for IUU fishing offences)

The illegal plundering of fishing stocks worldwide is masked behind a maze of corporate structures that makes discovery of the beneficiaries of such activity, difficult, if not impossible to identify. This paper outlines the problem of illegal fishing and then develops a multi-layered response to avert the veil of corporate entity being used as a means of preventing domestic States from answering the principal thematic question—who is the true beneficiary of this illegal behaviour, and who should be held responsible.     

Combined numerical model of currents, waves, and sediment transport in Lake Donuzlav

We present a numerical model of the dynamics of Lake Donuzlav, which enables one to perform simultaneous numerical analyses of the currents, sea level, waves, and sediment transport. The model is based on the hydrodynamic block and the spectral wave model. For typical storm situations, we study the specific features of the integral circulation of waters and the three-dimensional structure of currents, investigate the wind-induced wave fields, and evaluate the flows of sediments and deformations of the bottom. The presence of intense eddy structures is revealed in the field of currents caused by the bottom topography. A significant intensification of waves in the south part of the lake is established in the case of penetration of storm waves through the strait. It is shown that the account of waves leads to qualitative changes in the structure of circulation in the lake and to the formation of well-pronounced areas of wave-induced elevations and lowerings of the sea level. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 2, pp. 43–65, March–April, 2006.     

Methyl halide production and loss rates in sea water from field incubation experiments

Experiments were conducted in the field to determine the non-chemical loss rate of methyl iodide in seawater and to examine production rates of methyl halides. The loss rate of added C13 labelled methyl iodide, present at concentrations similar to those found in seawater, corrected for chemical loss due to reaction with Cl⁻ varied from < 1 to 18% day^− 1, with a mean value of 7%. This rate of loss is much lower than that which was proposed by Bell et al. [Bell, N., Hsu, L., Jacob, D. J., Schultz, M. G., Blake, D. R., Butler, J. H., King, D. B., Lobert, J. M., Maier-Reimer, E., 2002. Methyl iodide: Atmospheric budget and use as a tracer of marine convection in global models, Journal of Geophysical Research-Atmospheres 107(D17), 4340-4351.] to account for the large discrepancies between observed and predicted mid-latitude concentrations of CH₃I based on their global photochemical source model. The suitability of several types of container for seawater incubations was studied and only quartz tubes appeared to be free of experimental artifact. Collapsible polyvinyl fluoride containers showed major production of methyl halides on irradiation with simulated sunlight. Polyethylene containers caused spurious production of methyl iodide at lower rates.     

Effects of polynuclear aromatic hydrocarbons on lysosomal membranes in molluscs

Lysosomal sequestration of polynuclear aromatic hydrocarbons (PNAHs), a major class of environmental contaminant, is a well-established phenomenon;¹ considerably less is known about their pathological effects on lysosomes. Marine molluscs contain a number of lysosome-rich tissues and PNAHs are known to induce deleterious alterations in lysosomal structure and latency of lysosomal enzymes.² The latter are presumed to involve destabilisation of the lysosomal membrane, resulting in increased permeability and reduced enzyme latency. If lysosomal injury involves derangement of membrane-lipid structure due to the interaction of PNAHs then it would be expected that membrane damage would be closely linked to the structural characteristics of the intruding molecule. Our results show that the effects of the isomeric PNAHs phenanthrene and anthracene on digestive cell lysosomal stability were markedly different in the marine mussel (Mytilus edulis) over the same range of tissue concentrations. Lysosomal membrane stability was determined using a cytochemical test for enzyme latency.³     

An analysis of 3.5 kHz acoustic reflections and sediment physical properties

Near-bottom normal incidence acoustic reflection data and sediment physical property data are used to study the relationships between acoustic reflections and sediment physical properties. A pinger-hydrophone experiment was performed to obtain the necessary acoustic reflection data. In addition, a standard piston core was retrieved in the acoustic survey area for physical property analysis. The piston core was sampled and 13 properties were measured at 55 locations within the top 12 m of the core. Correlation studies amongst the sediment physical properties resulted in the following strong correlations: acoustic impedance ($\text{Z}$) and porosity ($\text{N}$), (0.96); water content ($\text{WC}$) and $\text{Z}$, (0.95); bulk density ($\text{BD}$) and $\text{Z}$, (0.99).The empirical orthonormal function (EOF) method was employed for acoustic signal analysis. This method assumes no a-priori models of the sediment or causality. The EOF method reduced the acoustic data to 8 functions that contained 97.6% of the sample variance. The EOFs were subsequently analysed by using cepstrum analysis which reveals time delay information and enhances detecting zones of reflectivity. The result of the sediment physical property and cepstrum analysis indicates that zones of reflectivity are essentially zones of relatively high acoustic impedance, low porosity, and low phi (high mean grain size).     

The statistics of second order wave forces

A starting point in the statistical analysis of the slow drift motions of moored offshore structures is the determination of the statistical distribution of the second order exciting forces. In the past^2,6 an exponential probability density function has been used, this being the limiting case as the incident seastate becomes infinitely narrow banded. In the present note the second order force distribution is found for a general seastate and a significant deviation from an exponential distribution is found for those seastates which are likely to occur in practice. The statistical theory is based on a heuristic approximation to the second order force, which is shown to be consistent with a frequently used frequency domain approximation which has been suggested by Newman.⁸ Although Roberts² has shown that for very lightly damped systems the response statistics are independent of those of the exciting force, the present results may have a significant effect on the response statistics for higher levels of damping.