Treatment of Malting Wastewater in a Granular Sludge Sequencing Batch Reactor (SBR)

Aerobic granular sludge was successfully cultivated in a sequencing batch reactor (SBR) treating wastewater from the malting process with a high content of particulate organic matter. At an organic loading rate of 3.2 kg/(m³ d) COD_total and an influent particle concentration of 0.95 g/L MLSS an average removal of 50% in COD_total and 80% in COD_dissolved could be achieved. A comparison of granular and flocculent sludge grown under the same operating conditions showed no significant difference in removal efficiency although granules exhibited a higher metabolic activity in terms of specific oxygen uptake rate (r_{O2, X}). Two distinct mechanisms of particle removal were observed for granular sludge: during initial granule formation, particles were incorporated into the biofilm matrix. For mature granules, a high level of protozoa growth on the granule surface accounted for the ability to remove particulate COD. Combined evaluation of the development in MLSS content and sludge bed settling rate (i.e., mean derivative of the normalized sludge volume) was found to be an adequate method for monitoring the characteristic settling properties of a granulizing sludge bed. By means of this method, a distinct substrate gradient out of several operating conditions was concluded to have the biggest impact on the formation of aerobic granular sludge.     

Sampling Fauna in Stream Sediments as well as Groundwater Using One Net Sampler

Groundwater bores act as traps. Net samplers are regularly used for sampling this type of trap for fauna. To enable direct comparisons of faunal communities in groundwater bores and stream sediments, stream sediment tubes were built similar to groundwater bores and were sampled with net samplers for fauna. These stream sediment tubes consisted of a tube anchored in the stream sediment, also called interstitial space. To test the efficacy of this trap method in stream sediments, it was compared to another type of trap, Hahn's trap. Faunal communities sampled by a net in the stream sediment tubes did not differ hugely from fauna in Hahn's trap samples. Physical and chemical factors of sampled water in both the stream sediment tubes, the surrounding interstitial sediments and the second type of traps, Hahn's traps, showed that water in both the tubes and Hahn's traps was closely related to interstitial water. The net sampler is inexpensive and easy to handle. It is suggested that sampling stream tubes with nets may be an appropriate method for long‐term monitoring studies.     

Measurement of the spatial distribution of fluvial bedload transport velocity in both sand and gravel

Maps are presented of the spatial distribution of two‐dimensional bedload transport velocity vectors. Bedload velocity data were collected using the bottom tracking feature of an acoustic Doppler current pro?ler (aDcp) in both a gravel‐bed reach and a sand‐bed reach of Fraser River, British Columbia. Block‐averaged bedload velocity vectors, and bedload velocity vectors interpolated onto a uniform grid, revealed coherent patterns in the bedload velocity distribution. Concurrent Helley‐Smith bedload sampling in the sand‐bed reach corroborated the trends observed in the bedload velocity map. Contemporaneous 2D vector maps of near‐bed water velocity (velocity in bins centered between 25 cm and 50 cm from the bottom) and depth‐averaged water velocity were also generated from the aDcp data. Using a vector correlation coef?cient, which is independent of the choice of coordinate system, the bedload velocity distribution was signi?cantly correlated to the near‐bed and depth‐averaged water velocity distributions. The bedload velocity distribution also compared favorably with variations in depth and estimates of the spatial distribution of shear stress. Published in 2004 by John Wiley & Sons, Ltd.     

Determination of SO4β1 for yttrium and the rare earth elements at I = 0.66 m and t = 25°C—implications for YREE solution speciation in sulfate-rich waters

We present a complete set of stability constants (_SO4β₁) for the monosulfato-complexes of yttrium and the rare earth elements (YREE), except Pm, at I = 0.66 m and t = 25°C, where _SO4β₁ = [MSO₄⁺] × [M³⁺]⁻¹[SO₄²⁻]⁻¹ (M ≡ YREE and brackets indicate free ion concentrations on the molal scale). Stability constants were determined by investigating the solubility of BaSO₄ in concentrated aqueous solutions of MCl₃. This is the first complete set to be published in more than 30 years.The resulting _SO4β₁ pattern is very similar in shape to one reported by de Carvalho and Choppin (1967a) (I = 2 mol/L; t = 25°C) that has been largely ignored. Stability constants vary little between La and Sm, but display a weak maximum at Eu. Between Eu and Lu, _SO4β₁ decreases by 0.2 log units, substantially exceeding the ±0.02 log unit average analytical precision. The stability constant for Y is approximately equal to that for Er. Our _SO4β₁ pattern is consequently distinctly different from the consensus pattern, based on a single data set from 1954, which is essentially flat, with a range of only 0.07 log units between the lowest and highest _SO4β₁ values within the lanthanide series (excluding Y).Values of _SO4β₁ obtained in this work, in conjunction with the ion-pairing model of Millero and Schreiber (1982), allow prediction of _SO4β₁ between 0 and 1 m ionic strength. These results are used to assess both the absolute and relative extent of YREE sulfate complexation in acidic, sulfate-rich waters.     

Macroscale NTIMS and microscale LA-MC-ICP-MS Re-Os isotopic analysis of molybdenite: Testing spatial restrictions for reliable Re-Os age determinations, and implications for the decoupling of Re and Os within molybdenite

We present a detailed study of Re-Os age determinations for eight natural molybdenite samples of like polytype (2H), spanning a range of age, natural grain size and deposit type. The focus of the study is to critically evaluate the effects of sampling, sample preparation and aliquant size on the accuracy and reproducibility of Re-Os ages for these molybdenite samples. We find that for some molybdenite samples, analysis of small sample aliquants (<20 mg) may not yield accurate or reproducible Re-Os ages, whereas analysis of larger aliquants from the same mineral separate do yield reproducible Re-Os dates. Such an observation is best explained if Re and ¹⁸⁷Os are internally decoupled within molybdenite grains. This finding is supported from spot analyses by laser ablation MC-ICP-MS analyses presented here and is consistent with previously published observations.The degree of decoupling between Re and ¹⁸⁷Os appears to increase both as a function of increasing grain size, and increasing age of molybdenite. From detailed dating of individual molybdenite mineral separates, we provide approximate minimum aliquant amounts required for reproducible Re-Os age dating, as a function of molybdenite age and grain size. Geologically younger, naturally fine-grained molybdenite samples appear to show little Re and ¹⁸⁷Os decoupling, and reproducible ages can be determined from some samples with as little as 1 mg of aliquant. Geologically old, and coarse-grained molybdenite samples may require as much as 40 mg of aliquant from a much larger mineral separate to overcome Re and ¹⁸⁷Os decoupling. The mechanism(s) of Re and ¹⁸⁷Os decoupling within molybdenite is not constrained by this results of this study, but the observation that the degree of decoupling increases with grain size (distance) and age (time/geologic history) may suggest primary diffusive control. Assuming that Re and ¹⁸⁷Os decoupling in molybdenite results primarily from diffusion of ¹⁸⁷Os, apparent diffusion coefficients are calculated (D = x²/t). Estimates of D for Os made in this way range from 2.8 × 10⁻²⁶ to 2.1 × 10⁻²¹ m²/s, which are broadly similar to experimentally derived diffusion coefficients for Os in Fe-sulfide minerals and for Re in molybdenite at temperatures <500°C.     

Slab behaviour and its surface expression: new insights from gravity modelling in the SE-Carpathians

We use lithosphere-scale gravity models to calculate gravity anomalies resulting from oceanic subduction, continental collision, slab steepening, delamination, and break-off. Local isostasy was assumed for determining vertical movements caused by mass changes related to these tectonic processes. Our results show that subduction is accompanied by basin subsidence on the upper plate caused by the heavy lithospheric root of the subducting slab. The basin evolution goes parallel with the slab evolution and shows considerable modifications when the processes at depth change (slab steepening, delamination, break-off). Characteristic gravity anomaly curves were acquired for the different tectonic scenarios. These curves together with other data (e.g. basin evolution on the upper and the lower plate) were used for the reconstruction of the tectonic evolution of the SE-Carpathians which includes Tertiary subduction and collision followed by slab steepening and delamination.     

Experimental pressure solution compaction of synthetic halite/calcite aggregates

Experimental observations are reported of weakening of sediment-like aggregates by addition of hard particles. Sieved mixtures of calcite and halite grains are experimentally compacted in drained pressure cells in the presence of a saturated aqueous solution. The individual halite grains deform easily by pressure solution creep whereas calcite grains act as hard objects and resist compaction. The fastest rate of compaction of the mixed aggregate is not obtained for a 100% halite aggregate but for a content of halite grains between 45% and 75%. We propose that this unusual compaction behavior reflects the competition between two mechanisms at the grain scale: intergranular pressure solution at grain contacts and grain boundary healing between halite grains that prevent further compaction.     

Middle Campanian–lowermost Maastrichtian nannofossil and foraminiferal biostratigraphy of the northwestern Australian margin

The middle–late Campanian was marked by an increase in the bioprovinciality of calcareous microfossil assemblages into distinct Tethyan, Transitional, and Austral Provinces that persisted to the end of the Maastrichtian. The northwestern Australian margin belonged to the Transitional Province and the absence of key Tethyan marker species such as Radotruncana calcarata and Gansserina gansseri has led petroleum companies operating in the area to use the locally developed KCCM integrated calcareous microfossil zonation scheme. The KCCM zonation is a composite scheme comprising calcareous nannofossil (KCN), planktonic foraminiferal (KPF) and benthonic foraminiferal (KBF) zones. This paper presents the definitions and revisions of Zones KCCM8–19, from the highest occurrence (HO) of Aspidolithus parcus constrictus to the lowest occurrence (LO) of Ceratolithoides aculeus, and builds on our previous early–late Maastrichtian study. The presence of a middle–upper Campanian disconformity is confirmed by microfossil evidence from the Vulcan Sub-basin, Exmouth and Wombat plateaus, and the Southern Carnarvon Platform. In the Vulcan Sub-basin and on the Exmouth Plateau (ODP Hole 762C) the hiatus extends from slightly above the LO of common Rugoglobigerina rugosa to above the LO of Quadrum gothicum. On the Wombat Plateau (ODP Hole 761B) it spans from above the LO of Heterohelix semicostata to above the LO of Quadrum gothicum; and in the Southern Carnarvon Platform the disconformity has its longest duration from above the HO of Heterohelix semicostata to above the LO of Quadrum sissinghii. A significant revision of the events which define Zones KCCM18 and 19 was necessary owing to the observation that the LO of Ceratolithoides aculeus occurs below the HOs of Archaeoglobigerina cretacea and Stensioeina granulata incondita and the LO of common Rugoglobigerina rugosa. In the original zonation these events were considered to be coincident.     

Geography Education: The Glass Is Half Full and It's Getting Fuller

This article examines the recent progress of geography education as an academic subfield of geography and as an area of activity in K–12 education. Challenges to both endeavors are described. A restructuring of geography education's research program that focuses on spatial thinking and reasoning and merges applied and theoretical research is proposed.