Geology and activity around volcanoes on Io from the analysis of NIMS spectral images

The last two successful flybys of Io by Galileo in 2001 (orbits I31, I32) allowed the Near Infrared Mapping Spectrometer to enrich its collection of IR spectral image cubes of the satellite. These data cover hemispheric portions of Io, several volcanic centers as well as their surroundings with a spatial resolution ranging from 2 to 93 km pixel⁻¹. They map thermal emission from the hot-spots and the distribution of solid SO₂ in the 1.0-4.7 μm spectral range. We obtain maps of SO₂ abundance and granularity from the NIMS data using the method of Douté et al. (2002, Icarus 158, 460-482). The maps are correlated to distinguish four different physical units that indicate zones of SO₂ condensation, metamorphism and sublimation. We relate these information with visible images from Galileo's Solid State Imaging System and with detailed mapping of the thermal emission produced by Io's surface. Our principal goal is to understand the mechanisms controlling how lava, pyroclastics and gas are emitted by different types of volcanoes and how these products evolve. The 800 km diameter white ring of fallout created by a violent “Pillanian” eruption during summer of 2001 is at least partly composed of solid SO₂ and has enriched preexisting regional deposits. Orange materials have been recently or are currently emplaced 240 km south from the main eruption site, possibly as sulfur flows. A similar event may have taken place in the past at Ababinili Patera (12.5° N, 142° W). Carefull study of SO₂ maps covering the Emakong region also suggests that sulfur forms the bright channel-fed flow emerging from the south eastern side of the caldera. Within the main caldera of Tvashtar Catena completely cooled patches of crust exist. Elsewhere, the caldera is still cooling from previous episodes of flooding. We confirm that Amirani emits constantly large amount of SO₂ gas by interaction of fresh lava with the volatiles of the underlying plains. Nevertheless SO₂ frost is not the major component of the bright white ring seen in the SSI images. Over the whole Gish Bar region, SO₂ frost seems barely stable and is constantly regenerated. The stability increases along gray filamentary structures which could be faults filled with materials having peculiar thermal properties. Northwest of Gish Bar Patera, a localized bright deposit shows an unusual spectral signature potentially indicative of H₂O molecules forming ice crystals or being trapped in a nonidentified matrix. The Chaac region may present a thickened old crust reducing the geothermal flux to levels lower than 0.5 W m⁻² and thus creating a cold trap for SO₂. Looking at the abundance and degree of metamorphose of SO₂, we establish the relative age of different flows and ejecta for the Sobo Fluctus. Finally the assumption that the white patches in visible images indicate SO₂ rich deposits is once again challenged. In the Camaxtli region we identify a topographically controlled compact white deposit showing only moderate SO₂ abundance. In contrast, we detect two spots of quite pure SO₂ ice on the gray flanks of Emakong. Furthermore, the close association of fumarolic SO₂ and red S₂ already noted for several volcanic centers is observed at Tupan.     

Numerical Modeling of the Observed Wiechert Seismograph Magnification

—The paper presents results of experiments designed to measure the actual dynamic magnification of the Wiechert 1000 kg horizontal seismometer when excited by seismic waves. This is accomplished by comparing 51 digital records of seismic events recorded by the Wiechert and a well calibrated reference seismometer. The results obtained indicate that the magnification of the Wiechert seismometer is influenced by the interaction of its mass and frame, especially for high frequencies. This interaction has been modeled by considering a system of two coupled pendulums, yielding a theoretical dynamic magnification curve which exhibits main features of the observed magnification. The dis crepancy between the nominal and the actual response of the Wiechert seismograph may lead to errors in studies involving spectral analyses of recorded seismograms, and to overestimation of local earth quake magnitudes.     

Geotechnical assessment of the bearing capacity of coal mine floors

Summary This investigation concerns 3 longwall faces having variable strata and mining conditions, but supported by 202 tonnes hydraulic 6-leg chocks. Bearing capacity tests along the faces were conducted to evaluate the factors influencing floor deformation and failure. The effect of size, shape and perimeter of the base plates, thickness of the floor layer, time and moisture on the ultimate bearing capacity of the floor was measured and discussed. Application of this work is the prediction of stability and support performance of face ends, as well as the design of support systems and ground control on production faces.     

Climatic response of thick leaf spruce (Picea crassifolia) tree-ring width at different elevations over Qilian Mountains, northwestern China

Tree-ring cores of thick leaf spruce (Picea crassifolia) taken from four sites at different elevations, in the middle of the Qilian Mountains, in the arid and semi-arid region of northwestern China, were used to develop four tree-ring width chronologies using standard dendrochronological methods. Results indicate that with increasing altitude the chronologies’ year-to-year variations decreased. Hence, the sensitivity of the tree-ring chronologies to climate decreases with altitude. Further analysis showed that the significant limiting factor on tree growth is spring precipitation. Measurements of stomata density and leaf dry weight suggest the species’ ecological adaptation strategy changes with elevation. At high elevation the metabolic rate of thick leaf spruce decreases, thus showing the effect of the climate.     

Chemical denudation rates in Kärkevagge, Swedish Lapland

This study examines the spatial and temporal variability of chemical denudation rates in Kärkevagge, northern Sweden. The chemical flux rates within the valley are strongly influenced by the local geology. Chemical denudation rates determined for the study period are more than double those previously reported in the literature for this valley. Rates of greater than 46t km⁻² a⁻¹ were measured at the valley mouth over the course of the melt season. This difference is likely due to differences in measurement technique compared to that used by past researchers. This rate is also much higher than for other arctic and alpine watersheds. Chemical denudation in Kärkevagge is comparable to larger temperate rivers. The rapid chemical denudation in Kärkevagge is likely due to sulfide weathering creating acid solutions.     

An expanded surface-water palaeotemperature inference model for use with fossil midges from eastern Canada

Using an expanded surface sample data set, representing lakes distributed across a transect from southernmost Canada to the Canadian High Arctic, a revised midge-palaeotemperature inference model was developed for eastern Canada. Modelling trials with weighted averaging (with classical and inverse deshrinking; with and without tolerance downweighting) and weighted averaging partial least squares (WA-PLS) regression, with and without square-root transformation of the species data, were used to identify the best model. Comparison of measured and predicted temperatures revealed that a 2 component WA-PLS model for square-root transformed percentage species data provided the model with the highest explained variance (r =0.88) and the lowest error estimate (RMSEP _jack =2.26 °C). Comparison of temperature inferences based on the new and old models indicates that the original model may have seriously under-estimated the magnitude of late-glacial temperature oscillations in Atlantic Canada. The new inferences suggest that summer surface water temperatures in Splan Pond, New Brunswick were approximately 10 to 12 °C immediately following deglaciation and during the Younger Dryas. During the Allerod and early Holocene, surface water temperatures of 20 to 24 °C were attained. The new model thus provides the basis for more accurate palaeotemperature reconstructions throughout easternmost Canada.     

Hanford tank residual waste – Contaminant source terms and release models

Residual waste is expected to be left in 177 underground storage tanks after closure at the US Department of Energy’s Hanford Site in Washington State, USA. In the long term, the residual wastes may represent a potential source of contamination to the subsurface environment. Residual materials that cannot be completely removed during the tank closure process are being studied to identify and characterize the solid phases and estimate the release of contaminants from these solids to water that might enter the closed tanks in the future. As of the end of 2009, residual waste from five tanks has been evaluated. Residual wastes from adjacent tanks C-202 and C-203 have high U concentrations of 24 and 59 wt.%, respectively, while residual wastes from nearby tanks C-103 and C-106 have low U concentrations of 0.4 and 0.03 wt.%, respectively. Aluminum concentrations are high (8.2–29.1 wt.%) in some tanks (C-103, C-106, and S-112) and relatively low (<1.5 wt.%) in other tanks (C-202 and C-203). Gibbsite is a common mineral in tanks with high Al concentrations, while non-crystalline U–Na–C–O–P ± H phases are common in the U-rich residual wastes from tanks C-202 and C-203. Iron oxides/hydroxides have been identified in all residual waste samples studied to date. Contaminant release from the residual wastes was studied by conducting batch leach tests using distilled deionized water, a Ca(OH)₂-saturated solution, or a CaCO₃-saturated water. Uranium release concentrations are highly dependent on waste and leachant compositions with dissolved U concentrations one or two orders of magnitude higher in the tests with high U residual wastes, and also higher when leached with the CaCO₃-saturated solution than with the Ca(OH)₂-saturated solution. Technetium leachability is not as strongly dependent on the concentration of Tc in the waste, and it appears to be slightly more leachable by the Ca(OH)₂-saturated solution than by the CaCO₃-saturated solution. In general, Tc is much less leachable (<10 wt.% of the available mass in the waste) than previously predicted. This may be due to the coprecipitation of trace concentrations of Tc in relatively insoluble phases such as Fe oxide/hydroxide solids.     

Analysis of mutations in the p53 tumor suppressor gene and Ki- and Ha-ras proto-oncogenes in hepatic tumors of European flounder (Platichthys flesus).

DNA from five tumors, three other-injured livers and two normal liver tissue samples from the European flounder were analyzed for mutations in exons 5-8 of the tumor suppressor gene p53 and at codons 12, 13 and 61 of Ha- and Ki-ras proto-oncogenes. No tumor-specific mutations were identified by direct sequencing and single-strand conformation polymorphism of these genes. A number of silent polymorphisms were noted in p53. In addition to a need for more extensive analyses of flounder liver tumor samples for ras or p53 mutations, other cancer-related genes should be investigated.     

Improved Resolution of Ambient Flow through Fractured Rock with Temperature Logs

In contaminant hydrogeology, investigations at fractured rock sites are typically undertaken to improve understanding of the fracture networks and associated groundwater flow that govern past and/or future contaminant transport. Conventional hydrogeologic, geophysical, and hydrophysical techniques used to develop a conceptual model are often implemented in open boreholes under conditions of cross-connected flow. A new approach using high-resolution temperature (±0.001°C) profiles measured within static water columns of boreholes sealed using continuous, water-inflated, flexible liners (FLUTe™) identifies hydraulically active fractures under ambient (natural) groundwater flow conditions. The value of this approach is assessed by comparisons of temperature profiles from holes (100 to 200 m deep) with and without liners at four contaminated sites with distinctly different hydrogeologic conditions. The results from the lined holes consistently show many more hydraulically active fractures than the open-hole profiles, in which the influence of vertical flow through the borehole between a few fractures masks important intermediary flow zones. Temperature measurements in temporarily sealed boreholes not only improve the sensitivity and accuracy of identifying hydraulically active fractures under ambient conditions but also offer new insights regarding previously unresolvable flow distributions in fractured rock systems, while leaving the borehole available for other forms of testing and monitoring device installation.