Tectonic significance of an earthquake sequence in the Zacoalco half-graben, Jalisco, Mexico

We studied a sequence of small earthquakes that occurred during the months of April and May of 1997, in Jalisco, southwestern Mexico. The earthquakes were located along a set of active faults that form the Zacoalco half-graben (La Lima fault system), west of Lake Chapala, within the rift–rift–rift triple junction. A total of 33 events were located, with magnitudes ranging from 1.5 to 3.5, recorded by a portable array of broadband seismographs. We identified two groups of events: one corresponding to a shallow normal fault, synthetic to La Lima fault system, and another group associated with a deeper fault. The events that occurred on the synthetic fault show normal faulting oriented on a NW–SE plane, dipping shallowly towards the SW. The other group of mechanisms showed either a normal fault oriented NW–SE and dipping steeply to the NE, or a very shallow-dipping normal fault, dipping to the SW. Earthquake distribution and fault plane solutions suggest that the Zacoalco half-graben developed from blocks that rotate as slip occurs on listric faults. These mechanisms could represent the type of motion expected for larger earthquakes in the area, like the one that occurred in 1568.     

Tectonic implications of the earthquake swarm of 1997 in the Michoacan Triangle, Mexico

An earthquake swarm occurred during February and March 1997 in the vicinity of the Tancitaro Volcano, in the southern part of the tectonically complex Michoacan Triangle. A study of these events provides an opportunity to map the active faults in the area and to learn if the orientation and the sense of motion on these faults are consistent with the mapped faults and the alignment of cinder cones in the region. The foci of 230 earthquakes, which could be located, are distributed between 10 and 18 km depth, and show an alignment in, roughly, a NE direction. The focal mechanisms and seismic moments of the 27 best-recorded events were determined by waveform modeling of P and S waves. These mechanisms show two distinct patterns. More than 50% of the solutions are left-lateral strike–slip mechanisms with a normal component. The preferred fault plane strikes NE. Another group of events, probably caused by triggered seismicity on the Chapala–Oaxaca fault zone, shows left-lateral strike–slip mechanisms with a large-thrust component on NW-trending faults. S wave splitting shows 1–2.5% crustal-anisotropy. The direction of the anisotropy coincides with the NE alignment of events, and the preferred nodal plane. This is also the alignment of cinder cones, suggesting that preexisting fractures and cracks are responsible for the seismicity and anisotropic behavior of the crust. The resulting stress orientation, NE compression, is the one expected for the fore-arc region. We conclude that although Michoacan Triangle lies in the Trans-Mexican Volcanic Belt, it does not form part of this stress province where the stress orientation is NS extension.     

Fragmentation, transport and deposition of a low-grade ignimbrite: The Citlaltépetl Ignimbrite, Eastern México

 The Citlaltépetl Ignimbrite records one of the largest explosive events during the Holocene activity of Citlaltépetl Volcano (Pico de Orizaba). Multiple pyroclastic flow units, a fall deposit, and some lahar units were emplaced between 8500–9000 y B.P. as a result of repetitive but discrete explosive events. The whole ignimbrite resulted from discrete fluctuations in eruptive intensity that decreased with time. The initial pyroclastic flow pulse was by far the most violent and widespread event, and its deposits show conspicuous variations in structure and texture that could be associated with different mechanisms of transport and emplacement. Subpopulation Sequential Fragmentation Transport (SFT) analyses were carried out in order to determine the physical mechanisms that selectively concentrate or remove particles in the moving flows. We suggest that lateral and temporal changes in the flow rheology, in which fluidization, yield strength, entrainment of atmospheric air, and sedimentation played a dominant role in flow propagation and emplacement, may imprint a unique signature in the grain-size spectra. The lowermost unit of the Citlaltépetl Ignimbrite can be envisaged by a model in which progressive aggradation near the vent became replaced by en masse emplacement farther outward. Received: 24 March 1998 / Accepted: 9 October 1998     

Groundwater as a geologic agent: An overview of the causes, processes, and manifestations

 The objective of the present paper is to show that groundwater is a general geologic agent. This perception could not, and did not, evolve until the system nature of basinal groundwater flow and its properties, geometries, and controlling factors became recognized and understood through the 1960s and 1970s. The two fundamental causes for groundwater's active role in nature are its ability to interact with the ambient environment and the systematized spatial distribution of its flow. Interaction and flow occur simultaneously at all scales of space and time, although at correspondingly varying rates and intensities. Thus, effects of groundwater flow are created from the land surface to the greatest depths of the porous parts of the Earth's crust, and from a day's length through geologic times. Three main types of interaction between groundwater and environment are identified in this paper, with several special processes for each one, namely: (1) Chemical interaction, with processes of dissolution, hydration, hydrolysis, oxidation-reduction, attack by acids, chemical precipitation, base exchange, sulfate reduction, concentration, and ultrafiltration or osmosis; (2) Physical interaction, with processes of lubrication and pore-pressure modification; and (3) Kinetic interaction, with the transport processes of water, aqueous and nonaqueous matter, and heat. Owing to the transporting ability and spatial patterns of basinal flow, the effects of interaction are cumulative and distributed according to the geometries of the flow systems. The number and diversity of natural phenomena that are generated by groundwater flow are almost unlimited, due to the fact that the relatively few basic types are modified by some or all of the three components of the hydrogeologic environment: topography, geology, and climate. The six basic groups into which manifestations of groundwater flow have been divided are: (1) Hydrology and hydraulics; (2) Chemistry and mineralogy; (3) Vegetation; (4) Soil and rock mechanics; (5) Geomorphology; and (6) Transport and accumulation. Based on such a diversity of effects and manifestations, it is concluded that groundwater is a general geologic agent. Received, December 1998 · Revised, January 1999 · Accepted, January 1999     

Structural and kinematic analysis of the Corredoiras detachment: evidence for early Variscan synconvergent extension in the Ordenes Complex, NW Spain

 An important detachment is described in the allochthonous Ordenes Complex, in the NW Iberian Massif, and its meaning is related to the kinematics of contemporaneous convergent structures. The Corredoiras Detachment (CD) separates a hangingwall unit, characterised by a medium-pressure metamorphic gradient, from a footwall high-pressure and high-temperature unit and an underlying ophiolitic unit. An associated ductile shear zone, nearly 2000 m thick, developed in the lower part of the hangingwall unit, where the Corredoiras Orthogneiss, a Lower Ordovician metagranite, was progressively transformed into augengneisses, mylonitic and ultramylonitic gneisses. The attitude of the stretching and mineral lineation in the mylonites varies due to late refolding at map scale, but the sense of movement can be estimated, being roughly top to the SE. According to crosscutting relationships, the CD developed subsequent to the thrusting of the high-pressure/high-temperature unit onto the ophiolitic unit, and prior to younger extensional detachments, upright folding and strike-slip tectonics. The geometric relationships of the CD with the previous structures in the footwall unit, the subtractive character of the metamorphic gap between its hangingwall and footwall, and the available isotopic data suggest that the CD is an early Variscan, ductile extensional detachment, the movement of which was roughly simultaneous with the onset of thrusting of the allochthonous complexes over their relative autochthon. Received: 17 November 1998 / Accepted: 4 April 1999     

Crustal structure of the Alpine–Pannonian transition zone: a combined seismic and gravity study

 The crustal structure of the transition zone between the Eastern Alps and the western part of the Pannonian depression (Danube basin) is traditionally interpreted in terms of subvertical Tertiary strike-slip and normal faults separating different Alpine tectonic units. Reevaluation of approximately 4000-km-long hydrocarbon exploration reflection seismic sections and a few deep seismic profiles, together with data from approximately 300 wells, suggests a different structural model. It implies that extensional collapse of the Alpine orogene in the Middle Miocene was controlled by listric normal faults, which usually crosscut Alpine nappes at shallow levels, but at depth merge with overthrust planes separating the different Alpine units. The alternative structural model was tested along a transect across the Danube basin by gravity model calculations, and the results show that the model of low-angle extensional faulting is indeed viable. Regarding the whole lithosphere of the western Pannonian basin, gravity modelling indicates a remarkable asymmetry in the thickness minima of the attenuated crust and upper mantle. The approximately 160 km lateral offset between the two minima suggests that during the Miocene extension of the Pannonian basin detachment of the upper crust from the mantle lithosphere took place along a rheologically weak lower crust. Received: 13 July 1998 / Accepted: 18 March 1999     

A methodology for locating the original quarries used for constructing historical buildings: application to Málaga Cathedral, Spain

It is often necessary to locate the original quarry which supplied the stone for a particular historical building. This stones could be used for future restoration work and for testing in the laboratory (artificial aging tests, physical properties determination, control of the efficacy of conservation treatments, etc.). Generally, reviewing historical documentation gives information about the geographical setting of quarries and location of the stones in the monument, but this information needs to be proved by field and laboratory studies. The comparative study of stone from quarries and monuments should basically include the following: (1) mineralogical and petrographical studies; (2) the chemical analysis of major, minor and trace elements; (3)stable isotopes determinations; (4) physical properties of quarry materials and unweathered building stone (water absorption, ultrasound transmission velocity, porosity and porous system, density, bulk density, compressive strength, etc.). This methodology was applied to Málaga Cathedral stones represented in the main façade, towers, and the western zone of the terrace, which, according to historical literature, came from Almayate (Miocene–Pliocene limestones) and Cerro Coronado (Permotriassic sandstone) in Málaga. The conclusion of the comparative study carried out on quarries and building stones was consistent with the information available from the historical documentation.     

Shortage in the midst of plenty: Labour strategies in four Central and Eastern European cities

Labour shortage was an integral feature of the communist system of economic management and one that seemed most unlikely to persist in the face of systemic transformation. A casual examination of the unemployment rates that have emerged throughout most of Central and Eastern Europe (CEE) during the course of the past decade might suggest that this early assumption was correct. However, within the region the aggregate rate of joblessness, as well as the behaviour of national output, mask the fact that certain, major urban centres appear to have weathered well the storms caused by exposure to western markets and stringent fiscal and monetary policies. In these centres transformation has meant, to a greater or lesser degree, industrial modernisation and this begs the question of whether the human capital portfolios of the inherited labour force match up to the requirements of the new environment. This paper examines the meaning of the concept of labour shortage and presents the findings from a survey of employers in four leading cities of three major CEE economies designed to elicit if, and how, manpower requirements are being met in the present climate. The results indicate that, somewhat paradoxically, labour shortage persists in the more flexible markets of the post-communist era and that firms do not expect the situation to change radically in the near future. This revised version was published online in July 2006 with corrections to the Cover Date.     

Anisotropy of ionospheric irregularities determined from the amplitude of satellite signals at a single receiver

A new method of determining the anisotropy parameters of small-scale irregularities in the ionospheric F region is presented and experimental results are shown. The method is based on observations of amplitude fluctuations of radio waves transmitted by satellites flying above the F region. In practice, Russian navigational satellites are used and both the amplitude and the phase of the signal is measured on the ground level. The method determines both the field-aligned anisotropy and the field-perpendicular anisotropy and orientation of the spatial spectrum of the irregularities, assuming that the contours of constant power have an elliptic shape. A possibility of applying the method to amplitude tomography is also discussed. Using a chain of receivers on the ground level, one could locate the regions of small-scale irregularities as well as determine their relative intensities. Then the large-scale background structures could be mapped simultaneously by means of ordinary ray tomography using the phase observations, and therefore the relations of small-scale and large-scale structures could be investigated.     

The BanskáŠtiavnica ore district: relationship between metallogenetic processes and the geological evolution of a stratovolcano

The Banská?tiavnica ore district is in the central zone of the largest stratovolcano in the Central Slovakia Neogene Volcanic Field, which is situated at the inner side of the Carpathian arc over the Hercynian basement with the Late Paleozoic and Mesozoic sedimentary cover. Volcanic rocks of the High-K orogenic suite are of the Badenian through Pannonian age (16.5–8.5?Ma). Their petrogenesis is closely related to subduction of flysch belt oceanic basement underneath the advancing Carpathian arc and to back-arc extension processes. The stratovolcano includes a large caldera 20?km in diameter and a late-stage resurgent horst in its centre, exposing a basement and extensive subvolcanic intrusive complex. The following stages have been recognized in the evolution of the stratovolcano: (1)?formation of a large pyroxene/hornblende-pyroxene andesite stratovolcano; (2)?denudation, emplacement of a diorite intrusion; (3) emplacement of a large granodiorite bell-jar pluton within the basement; (4) emplacement of granodiorite/quartz-diorite porphyry stocks and dyke clusters around the pluton; (5) caldera subsidence and its filling by biotite-hornblende andesite volcanics, emplacement of quartz-diorite porphyry sills and dykes at the subvolcanic level; (6)?renewed activity of andesites from dispersed centres on slopes of the volcano; (7) uplift of a resurgent horst accompanied by rhyolite volcanics and granite porphyry dykes. The following types of ore deposits (mineralizations) have been identified in the Banská?tiavnica ore district: 1. Quartz-pyrophyllite-pyrite high-sulphidation system at ?obov, related to the diorite intrusion. 2. Magnetite skarn deposits and occurrences?at contacts of the granodiorite pluton with Mesozoic carbonate rocks. Magnetite ores occur as lenses in the calcic skarns. 3.?Stockwork/disseminated base metal deposit along an irregular network of fractures in apical parts of the granodiorite pluton and in remnants of basement rocks. Mineral paragenesis is simple, with leading sphalerite and galena and minor chalcopyrite and pyrite. In overlying andesites the mineralization is accompanied by metasomatic quartzites and argillites with pyrophyllite, kaolinite, illite and pyrite. 4. Porphyry/skarn copper deposits and occurrences related to granodiorite/quartz-diorite porphyry dyke clusters and stocks around the granodiorite intrusion. The mineralized zone is represented by accumulations of chalcopyrite in exo- and endo-skarns, usually of the magnesian type affected by serpentinization. Besides chalcopyrite, pyrhotite, minor bornite, chalcosite, tennantite and magnetite, rare molybdenite and gold are present. The alteration pattern around productive intrusions includes an external zone of propylitization, a zone of argillitic alteration (kaolinite – illite – pyrite) and an internal zone of phyllic alteration (quartz – sericite – pyrite). Biotitization is rare and limited to porphyry intrusions. 5. Intrusion related “mesothermal” gold deposit in an andesitic environment just above the granodiorite intrusion. Gold of high fineness with base metal mineralization is contained in brecciated and/or banded quartz veins of subhorizontal orientation, parallel to the surface of granodiorite pluton. At least the first phase of mineralization is older than quartz-diorite porphyry sills, which separate granodiorite and blocks of mineralized andesite. 6. Hot spring type advanced argillic systems in the caldera filling. Silicites and opalites accompanied by kaolinite, alunite and pyrite grade downward into smectite dominated argillites. 7. Vein type epithermal precious/base metal deposits and occurrences as a result of the long lasting interaction among structural evolution of the resurgent horst and evolving hydrothermal system, extensive intrusive complex and deep seated siliceous magma chamber serving as heat and magmatic fluid source. Three types of epithermal veins occur in a zonal arrangement: (a) base metal veins ± Au with transition to Cu?±?Bi mineralization at depth in the east/central part of the horst, (b)?Ag – Au veins with minor base metal mineralization and (c) Au – Ag veins located at marginal faults of the horst. Isotopic composition of oxygen and hydrogen in hydrothermal fluids indicate mixing of magmatic and meteoric component (with generally increasing proportion of meteoric component towards younger mineralization periods?). Veins are accompanied by zones of silicification, adularization and sericitization, indicating a low sulphidation environment. 8.?Replacement base metal mineralization of a limited extent in the Mesozoic carbonate rocks next to sulphide rich epithermal base metal veins.