Failure Process after Peak Strength of Artificial Joints by Fractal Dimension

Because lack of information when the joints exhibit strain softening behavior, the transition from peak to residual values is assumed to decrease either linearly or exponentially. Also, displacement of slide side after peak is much larger than the peak displacement and the stress approaches the residual state, thus studying failure process after peak strength is very important. In this research, three types of artificial joints with tooth-shaped asperity under repeated direct-shear were tested. Continuously movement of slide side after peak strength was monitored during shearing test. Reduction of shear parameters was examined according to two failure criteria (Barton and Patton). JRC value (Joint Roughness Coefficient) for a given profile was estimated by fractal dimension. One of the results of this study is that Barton’s criterion predicts a good estimation of residual strength and the second result is when the amount of fractal dimension of a joint surface increases, the JRC amount also increases, and with having value of h (height average) and l (base average) of a tooth-shaped asperity can determine the JRC of joint surface. M. Askari is a M.Sc Student of Engineering Faculty, Mining Engineering Department, Tarbiat Modares University, Tehran.     

Floor response spectra for base-isolated multi-storey structures

A study of floor response spectra for a base-isolated multi-storey structure under sinusoidal and seismic ground excitations is carried out. Several base isolation systems including the laminated rubber bearing, the pure-friction, the resilient-friction, the Électricité de France and the sliding resilient-friction systems are considered. A sinusoidal ground acceleration and several earthquake accelerograms (including those of El Centro 1940, Pacoima Dam 1971 and Mexico City 1985) are used to evaluate the floor response spectra. The characteristics of the spectra generated by different base isolation systems are studied, and the results are compared with those for the fixed-base structure. It is shown that the structural contents can be protected against earthquakes by the use of properly designed base isolation systems. In particular, the laminated rubber bearing system appears to be remarkably effective in protecting the secondary systems under a variety of conditions.     

Improved Minimum Miscibility Pressure Prediction for Gas Injection Process in Petroleum Reservoir

Determination of gas–oil minimum miscibility conditions is one of the important design parameters to improve the displacement efficiency of the hydrocarbon reservoir during enhanced oil recovery with gas injection. In this work, a support vector regression (SVR) model is developed using experimental data to estimate the minimum miscibility pressure (MMP) for various reservoir fluids and injection gases. Experimental MMP data taken from the reliable literature were used as input. Each data point input includes methane and intermediate components mole percent, plus fraction properties and reservoir temperature related to reservoir fluid and CO₂, H₂S, N₂ and intermediate mole fractions, and intermediate properties of the injected gas. Experimental MMP is regarded as the model output. The database contains 135 datasets, from which 125 datasets were used for model development, and the rest were used for model evaluation. Genetic algorithm was implemented to optimize the SVR model parameters. The proposed data-driven model was verified by statistical validation data. The model results illustrate a correlation coefficient (R²) of 0.999. In addition, the SVR results demonstrate the proposed model to be a fast tool and a robust approach to map input space to output features. The SVR model was compared to popular data-driven MMP estimation models as well. This comparison presents an acceptable accuracy relative to this estimation model. Finally, the presented model was evaluated against a comprehensive theoretical model of slim tube compositional simulation on a trusted literature dataset.     

Unified bounding surface model for monotonic and cyclic behaviour of clay and sand

Acta Geotechnica - This paper presents a constitutive model enabled to simulate monotonic and cyclic behaviour of clay and sand in a unified framework. The bounding surface concept has been...     

Large-scale replenishment of groundwater depletion by long-lived extreme rainstorms in arid regions: case study of the 2019 floods in Iran

The Dena rainstorm in Iran in March and April 2019 caused about US$ 8.3?×?10⁹ damage in the country; however, it resulted in the replenishment of half of the dam reservoirs and 35% of ponds and lakes. Also, it increased the volume of groundwater stored in aquifers by 3.6?×?10⁹ m³. In arid and semiarid regions such as most parts of Iran, which usually face water scarcity, getting water from rainstorms is essential for replenishing water resources. This research aims to quantify the direct and indirect effects of the Dena rainstorm on the replenishment of Iran’s groundwater storage using the groundwater balance method and water-table fluctuation method. Studies showed that the main mechanisms for replenishment of groundwater storage due to the rainstorm included increases in precipitation recharge, surface runoff recharge, and artificial recharge, and reductions in irrigation withdrawal and evapotranspiration, while the contribution of each factor is estimated to be about 23, 28, 2, 15, and 32%, respectively.

     

Geochemistry of garnet in pegmatites from the Boroujerd Intrusive Complex,Sanandaj-Sirjan Zone,western Iran: implications for the origin of pegmatite melts

Mineralogy and Petrology - Pegmatite-hosted garnets from four localities in the Boroujerd region, Lorestan (Western Iran), have been analysed for major and selected trace element compositions. The...     

On the seismic behavior of cylindrical base-isolated liquid storage tanks excited by long-period ground motions

A common effective method to reduce the seismic response of liquid storage tanks is to isolate them at base using base-isolation systems. It has been observed that in many earthquakes, the foregoing systems significantly affect on the whole system response reduction. However, in exceptional cases of excitation by long-period shaking, the base-isolation systems could have adverse effects. Such earthquakes could cause tank damage due to excessive liquid sloshing. Therefore, the numerical seismic response of liquid storage tanks isolated by bilinear hysteretic bearing elements is investigated under long-period ground motions in this research. For this purpose, finite shell elements for the tank structure and boundary elements for the liquid region are employed. Subsequently, fluid–structure equations of motion are coupled with governing equation of base-isolation system, to represent the whole system behavior. The governing equations of motion of the whole system are solved by an iterative and step-by-step algorithm to evaluate the response of the whole system to the horizontal component of three ground motions. The variations of seismic shear forces, liquid sloshing heights, and tank wall radial displacements are plotted under various system parameters such as the tank geometry aspect ratio (height to radius), and the flexibility of the isolation system, to critically examine the effects of various system parameters on the effectiveness of the base-isolation systems against long-period ground motions. From these analyses, it may be concluded that with the installation of this type of base-isolation system in liquid tanks, the dynamic response of tanks during seismic ground motions can be considerably reduced. Moreover, in the special case of long-period ground motions, the seismic response of base-isolated tanks may be controlled by the isolation system only at particular conditions of slender and broad tanks. For the case of medium tanks, remarkable attentions would be required to be devoted to the design of base-isolation systems expected to experience long-period ground motions.     

Simplified dynamic analysis to evaluate liquefaction-induced lateral deformation of earth slopes: a computational fluid dynamics approach

Lateral deformation of liquefiable soil is a cause of much damage during earthquakes, reportedly more than other forms of liquefaction-induced ground failures. Researchers have presented studies in which the liquefied soil is considered as viscous fluid. In this manner, the liquefied soil behaves as non-Newtonian fluid, whose viscosity decreases as the shear strain rate increases. The current study incorporates computational fluid dynamics to propose a simplified dynamic analysis for the liquefaction-induced lateral deformation of earth slopes. The numerical procedure involves a quasi-linear elastic model for small to moderate strains and a Bingham fluid model for large strain states during liquefaction. An iterative procedure is considered to estimate the strain-compatible shear stiffness of soil. The post-liquefaction residual strength of soil is considered as the initial Bingham viscosity. Performance of the numerical procedure is examined by using the results of centrifuge model and shaking table tests together with some field observations of lateral ground deformation. The results demonstrate that the proposed procedure predicts the time history of lateral ground deformation with a reasonable degree of precision.     

A parametric study on the axial behaviour of elastomeric isolators in multi-span bridges subjected to horizontal seismic excitations

This paper investigates the potential tensile loads and buckling effects on rubber-steel laminated bearings on bridges. These isolation bearings are typically used to support the deck on the piers and the abutments and reduce the effects of seismic loads and thermal effects on bridges. When positive means of fixing of the bearings to the deck and substructures are provided using bolts, the isolators are exposed to the possibility of tensile loads that may not meet the code limits. The uplift potential is increased when the bearings are placed eccentrically with respect to the pier axis such as in multi-span simply supported bridge decks. This particular isolator configuration may also result in excessive compressive loads, leading to bearing buckling or in the attainment of other unfavourable limit states for the bearings. In this paper, an extended computer-aided study is conducted on typical isolated bridge systems with multi-span simply-supported deck spans, showing that elastomeric bearings might undergo tensile stresses or exhibit buckling effects under certain design situations. It is shown that these unfavourable conditions can be avoided with the rational design of the bearing properties and in particular of the shape factor, which is the geometrical parameter controlling the axial bearing stiffness and capacity for a given shear stiffness. Alternatively, the unfavourable conditions could be reduced by reducing the flexural stiffness of the continuity slab.