The elemination of re-reflected waves by a porous medium of finite thickness

The elimination of re-reflected waves in a wave channel by installing a porous medium in front of the wavemaker is investigated. The thickness of the porous wall required to eliminate the re-reflected waves is shown to be related to th porosity, friction coefficient, and wave period, as well as to both the positions of the porous medium and the test structure. However, this study indicates that the goal of eliminating re-reflected waves can be achieved by simply varying the thickness of the porous medium according to the wave period, with all the other factors arbitrarily selected.Assuming that the oscillation amplitude of the wavemaker board is constant, the primitive wave amplitude, before reaching the porous medium, becomes smaller as the wave period is increased. In addition, the study found that the required thickness of the porous medium for eliminating the re-reflected wave becomes larger as the wave period is increased. This results in a trend which further reduces the wave amplitude after the wave passes through the porous medium. In consequence, the oscillation amplitude of a wavemaker board has to be adjusted in a larger scale if the wave period is to be increased.     

Structure and Quaternary tectonic history of the Woodlark triple junction region,Solomon Islands

The Woodlark triple junction region, a topographically and structurally complex triangular area of Quaternary age, lies east of Simbo Ridge and southwest of the New Georgia island group, Solomon Islands, at the junction of the Pacific, Australian and Solomon Sea plates. SeaMARC II side-scan imagery and bathymetry in conjunction with seismic reflection profiles, 3.5 kHz records, and petrologic, magnetic and gravity data show that the active Woodlark spreading centre does not extend into this region.South of the triple junction region, the Woodlark spreading centre reoriented at about 2 Ma into a series of short ESE-trending segments. These segments continued to spread until about 0.5 Ma, when the lithosphere on their northern sides was transferred from the Solomon Sea plate to the Australian plate. Simultaneously the Simbo transform propagated northwards along the western side of the transferred lithosphere, forming a trench-trench-transform triple junction located NNW of Simbo island and a new leaky plate boundary segment that built Simbo Ridge.As the Pacific plate approached, the area east of northern Simbo Ridge was tilted northwards, sheared by dominantly right-lateral faults, elevated, and intruded by arc-related magmas to form Ghizo Ridge. Calc-alkalic magmas sourced beneath the Pacific plate built three large strato-volcanic edifices on the subducting Australian plate: Simbo at the northern end of Simbo Ridge, and Kana Keoki and Coleman seamounts on an extensional fracture adjoining the SE end of Ghizo Ridge.A sediment drape, supplied in part from Simbo and Kana Keoki volcanoes, mantles the east-facing slopes of northern Simbo and Ghizo Ridges and passes distally into sediment ponded in the trench adjoining the Pacific plate. As a consequence of plate convergence, parts of the sediment drape and pond are presently being deformed, and faults are dismembering Kana Keoki and Coleman seamounts.The Woodlark system differs from other modern or Tertiary ridge subduction systems, which show wide variation in character and behaviour. Existing models describing the consequences of ridge subduction are likely to be predictive in only a general way, and deduced rules for the behaviour of oceanic lithosphere in ridge subduction systems may not be generally applicable.     

Bacterioplankton growth and production at the Louisiana hydrocarbon seeps

The growth rate and potential production of bacterioplankton in cold hydrocarbon seeps located along the Louisiana coast were determined using a pulse-labeling technique. Surprisingly, community doubling times are on the order of 1.1 h, which compares to laboratory-grown cultures. We also found that there are differences in growth rates on relatively small geographic scales, suggesting the influence of site-specific geological features (e.g., gas hydrate mounds). Proceeding downslope to deeper waters, methane-oxidizing bacteria appeared to play a more significant role in community productivity. These preliminary experiments indicated, quite unexpectedly, that water column microbes are growing at a more rapid rate than in any other marine system so far studied and that methane may serve as a primary nutrient (carbon) source in these seep-associated microbial assemblages.     

The Equatorial Atlantic Mid-Ocean Channel: An Ultra High-Resolution Image of Its Burial History Based on TOPAS Profiles

Multibeam bathymetric and ultra high-resolution seismic data reveal that the distal course of the Equatorial Atlantic Mid-Ocean Channel (EAMOC) extends further east and south than was previously known, and is controlled by the presence of morphologic highs related to the Fernando de Noronha Fracture Zone. Distal course of the EAMOC is buried by sediments, and does not have bathymetric expression on the seafloor. The channel fill consists of three seismic sequences, suggesting that the recent geological evolution of the channel is composed of successive phases of decreasing sedimentary activity that finally resulted in its complete burial. Tectonic and volcanic activity related to the Fernando de Noronha Fracture Zone and Ridge, together with the effect of strong pulses of the Antarctic bottom water current during the upper Pliocene are suggested to have contributed to the progressive burial and the final abandonment of the EAMOC.     

Diel fluctuations in dissolved free amino acids and monosaccharides in Chesapeake Bay dinoflagellate blooms

The accumulation of phytoplankton biomass in recurring summer dinoflagellate blooms of Chesapeake Bay is accompanied by large pools of dissolved organic matter (DOM). Two fractions of the DOM, free amino acids (DFAA) and monosaccharides (MONO), were measured at 3 h intervals in mixed species dinoflagellate blooms (Katodinium rotundatum, Gymnodinium spp.) and related to productivity, biomass and photoperiod. Peak chlorophyll levels for the three blooms were 28, 65 and 938 μg1⁻¹. In general, DFAA and MONO concentrations increased with increasing biomass of bloom-forming species, reaching 203 and 844 μg1⁻¹. MONO appeared to accumulate during the day while there was no consistent pattern for DFAA. The accumulations of DFAA and MONO in blooms indicate that bloom production might stimulate microheterotrophy, thereby enhancing carbon and nutrient cycling in bloom-impacted regions.     

Distribution of As, Cr and V species in the Po-Adriatic mixing area, (Italy)

The distribution of dissolved and participate concentrations of As, Cr and V was investigated in the mixing area of the Po river in five surveys over the period March 1992-March 1995. The data obtained indicate noticeable contamination of coastal waters of the northern Adriatic with Cr but not As or V. Total dissolved concentrations for As and V were comparable with oceanic levels but were higher by a factor of 4 for Cr. These results suggest either low anthropogenic inputs of As and V, from terrigenous and atmospheric sources, or efficient removal mechanisms. The investigated metals had low reactivity during freshwater-seawater mixing and the distribution of concentrations in the dissolved and solid phases suggests that the dilution process is the main factor controlling the transport of these metals to the sea in low-to-medium solid transport conditions. Further investigations are required to elucidate the behavior of these metals during high solid transport conditions. Significant changes in the speciation of As occurred during the transition between the two end-member matrices. In the coastal waters of the northern Adriatic, the arsenite fraction in winter, and the arsenite and dimethylarsinate fractions in summer increased with respect to riverine waters. Changes in the speciation of chromium were minor, but also showed a small increase in reduced species in marine waters.     

Sio Guyot: A complex volcanic edifice in the western Mid-Pacific Mountains

Sio Guyot, in the westernmost edge of the Mid-Pacific Mountains, is a large, complex volcanic edifice rising to more than 1200 m below sea level. The summit is divided into two flat-topped areas by a WNW-trending sediment-filled trough. Seismic reflection profiles reveal three acoustic units: an upper transparent layer (pelagic cap), a lower opaque layer (reef- and lagoon-derived sediments), and an acoustic (volcanic) basement. Free-air gravity anomalies indicate three eruptive centers or conduits within the main edifice, which apparently was constructed during late Cretaceous time on a broad basement swell or plateau that today is more than 3400 m below sea level (1500 m above regional abyssal depths).     

Chemical oceanography, vol. 8: Edited by J.P. Riley and R. Chester. Academic Press, London, 1983, xvi + 398 pp., £45.00/US $75.00 (hardcover)

Representative profiles of inorganic nitrogenous species dissolved in interstitial waters of coral reef sands are presented. Ammonium is the dominant nitrogenous species in these pore waters with concentrations of up to 40 μm. Nitrate is present but in lower concentrations. Nitrite is found only occasionally in trace amounts. Computations of diffusive fluxes and inferences concerning microbial activity are derived from the profile structures. Computed flux rates of nitrogenous species from the sediment to the water column range between 0.75 and 1.37 μM m^?1 h^?1. These inputs may represent a significant source of recycled nitrogen to the primary producers of the coral reef ecosystem.     

A time-dependent radiation condition for transient wave-structure interactions

An extrapolated version of a time-dependent nonreflecting boundary condition is developed for use at artificial boundaries to truncate infinite/semi-infinite domains for transient water wave problems. Test examples include single- and multiple-frequency flap wavemaker problems and free vibrations of a floating circular cylinder. The finite element results compare favorably to analytical solutions. It is shown that with the proposed boundary condition the numerical simulations have little reflections from the artificial boundaries.     

Sea-level, sediment supply and coastal changes: Examples from the coast of Ireland

Sediment supply and pre-existing shoreline morphology are crucial factors in controlling coastal changes due to sea-level rise. Using examples from both southeast and northeast Ireland, it can be shown that sea-level change may trigger a sequence of events which leads to both static and dynamic shoreline equilibrium. Cliff erosion and longshore sediment movement in east Co. Wexford has led to injection of sediment onto the shelf, and the growth, under both wave and tide regimes, of linear offshore shoals. These shoals now control the pattern of shoreline erosion and provide a template for possible stepwise evolution of the coast under any future sea-level rise. In contrast, the nearby coast of south Co. Wexford comprises a series of coarse clastic barriers moving monotonously onshore, via overwash processes. Here the behavior of the barrier is conditioned by the antecedent morphology of both the beach face and stream outlet bedforms. Finally, the rock platform coast of Co. Antrim presents a far more resistant shoreline to incident marine processes, yet even here there is strong evidence of present process control over so-called ‘raised’ platforms and embayments. It is concluded that coastal sediment supply and dynamics, together with coastal morphology and its interaction with waves, present a far more complex variety of sea-level indicators than is normally acknowledged.