The suitability of annual tree growth rings as environmental archives: Evidence from Sr,Nd, Pb and Ca isotopes in spruce growth rings from the Strengbach watershed

The combination of the Sr, Nd and Pb isotope systems, recognized as tracers of sources, with the Ca isotope system, known to reveal biology-related fractionations, allowed us to test the reliability of spruce (Picea abies) growth rings as environmental archives through time (from 1916 to 1983) in a forest ecosystem affected by acid atmospheric deposition. Sr and Pb isotopes have already been applied in former tree-ring studies, whereas the suitability of Nd and Ca isotope systems is checked in the present article. Our Sr and Nd isotope data indicate an evolution in the cation origin with a geogenic origin for the oldest rings and an atmospheric origin for the youngest rings. Ca isotopes show, for their part, an isotopic homogeneity which could be linked to the very low weathering flux of Ca. Since this flux is weak the spruces’ root systems have pumped the Ca mainly from the organic matter-rich top-soil over the past century. In contrast, the annual growth rings studied are not reliable and suitable archives of past Pb pollution.     

Sensitivity of inland decay of North Atlantic tropical cyclones to soil parameters

Using the HURDAT best track analysis of track and intensity of tropical cyclones that made landfall over the continental United States during the satellite era (1980?C2005), we analyze the role of land surface variables on the cyclone decay process. The land surface variables considered in the present study included soil parameters (soil heat capacity and its surrogate soil bulk density), roughness, topography and local gradients of topography. The sensitivity analysis was carried out using a data-adaptive genetic algorithm approach that automatically selects the most suitable variables by fitting optimum empirical functions that estimates cyclone intensity decay in terms of given observed variables. Analysis indicates that soil bulk density (soil heat capacity) has a dominant influence on cyclone decay process. The decayed inland cyclone intensities were found to be positively correlated with the cube of the soil bulk density (heat capacity). The impact of the changes in soil bulk density (heat capacity) on the decayed cyclone intensity is higher for higher intensity cyclones. Since soil bulk density is closely related to the soil heat capacity and inversely proportional to the thermal diffusivity, the observed relationship can also be viewed as the influence of cooling rate of the land surface, as well as the transfer of heat and moisture underneath a land-falling storm. The optimized prediction function obtained by statistical model processes in the present study that predicts inland intensity changes during 6-h interval showed high fitness index and small errors. The performance of the prediction function was tested on inland tracks of eighteen hurricanes and tropical storms that made landfall over the United States between 2001 and 2010. The mean error of intensity prediction for these cyclones varied from 1.3 to 15.8 knots (0.67?C8.12?m?s^?1). Results from the data-driven analysis thus indicate that soil heat flux feedback should be an important consideration for the inland decay of tropical cyclones. Experiments were also undertaken using Weather Research Forecasting (WRF) Advanced Research Version (ARW ver 3.3) to assess the sensitivity of the soil parameters (roughness, heat capacity and bulk density) on the post-landfall structure of select storms. The model was run with 1-km grid spacing, limited area single domain with boundary conditions from the North American Regional Reanalysis. Of different experiments, only the surface roughness change and soil bulk density (heat capacity) change experiments showed some sensitivity to the intensity change. The WRF results thus have a low sensitivity to the land parameters (with only the roughness length showing some impact). This calls for reassessing the land surface response on post-landfall characteristics with more detailed land surface representation within the mesoscale and hurricane modeling systems.     

Why do people not learn from flood disasters? Evidence from Vietnam’s northwestern mountains

This article explores how the causes and impacts of a flood event as perceived by local people shape immediate responses and future mitigation efforts in mountainous northwest Vietnam. Local flood perception is contrasted with scientific perspectives to determine whether a singular flood event will trigger adjustments in mitigation strategies in an otherwise rarely flood-affected area. We present findings from interdisciplinary research drawing on both socioeconomic and biophysical data. Evidence suggests that individual farmers?? willingness to engage in flood mitigation is curbed by the common perception that flooding is caused by the interplay of a bundle of external factors, with climatic factors and water management failures being the most prominent ones. Most farmers did not link the severity of flooding to existing land use systems, thus underlining the lack of a sense of personal responsibility among farmers for flood mitigation measures. We conclude that local governments cannot depend on there being a sufficient degree of intrinsic motivation among farmers to make them implement soil conservation techniques to mitigate future flooding. Policy makers will need to design measures to raise farmers?? awareness of the complex interplay between land use and hydrology and to enhance collective action in soil conservation by providing appropriate incentives and implementing coherent long-term strategies.     

Application of the fluorescence quenching titration method to the complexation of copper (II) in the Gironde Estuary (France)

Quenching of fluorescence emission by the Cu²⁺ ion is measured in five samples from the Gironde Estuary (France). Non-linear regression analysis allows us to calculate from experimental data the values of C_L (complexing capacities or total ligand concentrations), K (conditional stability constants) and I_ML (residual fluorescence at the end of the titration). The results obtained on the Gironde estuarine samples indicate that C_L values are very low (<0.1 micromolar) and K values decrease from upstream to downstream. The relatively high values of I_ML are an indication that much of the organic fluorescing matter does not bind to Cu²⁺.     

First assessment of the Caulerpa racemosa (Caulerpales, Chlorophyta) invasion along the French Mediterranean coast

The introduced green alga Caulerpa racemosa var. cylindracea has been rapidly spreading in the Mediterranean Sea since 1990. It was first observed in France in 1997 (Marseilles). In early 2004, the stretch of the French Mediterranean coastline and the surface area affected by the invasion were estimated at about 83 km and 4014 ha, respectively. The depth range of colonized areas was usually 10-35 m depth. Shallow (0-10 m) and deep (down to 40 m) dense meadows were rarely observed. In contrast to the dead matte of Posidonia oceanica, which constituted the most widely colonized substratum, dense P. oceanica meadows and fine sand with large ripple-marks were not invaded. Few rocky areas were colonized and coarse sand bottoms were usually colonized below 20 m depth. All the colonized areas were exposed to human activities and more than 40% were fishing areas. Mild climate, suitable substrata, presence of vectors of dispersal and absence of efficient biological control make the French Mediterranean coast particularly vulnerable to the further spread of the alga.     

The effect of bulk composition on the solidus of carbonated eclogite from partial melting experiments at 3 GPa

To explore the effect of bulk composition on the solidus of carbonated eclogite, we determined near-solidus phase relations at 3 GPa for four different nominally anhydrous, carbonated eclogites. Starting materials (SLEC1, SLEC2, SLEC3, and SLEC4) were prepared by adding variable proportions and compositions of carbonate to a natural eclogite xenolith (66039B) from Salt Lake crater, Hawaii. Near-solidus partial melts for all bulk compositions are Fe–Na calcio-dolomitic and coexist with garnet + clinopyroxene + ilmenite ± calcio-dolomitic solid solution. The solidus for SLEC1 (Ca#=100 × molar Ca/(Ca + Mg + Fe_T)=32, 1.63 wt% Na₂O, and 5 wt% CO₂) is bracketed between 1,050°C and 1,075°C (Dasgupta et al. in Earth Planet Sci Lett 227:73–85, 2004), whereas initial melting for SLEC3 (Ca# 41, 1.4 wt% Na₂O, and 4.4 wt% CO₂) is between 1,175°C and 1,200°C. The solidus for SLEC2 (Ca# 33, 1.75 wt% Na₂O, and 15 wt% CO₂) is estimated to be near 1,100°C and the solidus for SLEC3 (Ca# 37, 1.47 wt% Na₂O, and 2.2 wt% CO₂) is between 1,100°C and 1,125°C. Solidus temperatures increase with increasing Ca# of the bulk, owing to the strong influence of the calcite–magnesite binary solidus-minimum on the solidus of carbonate bearing eclogite. Bulk compositions that produce near-solidus crystalline carbonate closer in composition to the minimum along the CaCO₃-MgCO₃ join have lower solidus temperatures. Variations in total CO₂ have significant effect on the solidus if CO₂ is added as CaCO₃, but not if CO₂ is added as a complex mixture that maintains the cationic ratios of the bulk-rock. Thus, as partial melting experiments necessarily have more CO₂ than that likely to be found in natural carbonated eclogites, care must be taken to assure that the compositional shifts associated with excess CO₂ do not unduly influence melting behavior. Near-solidus dolomite and calcite solid solutions have higher Ca/(Ca + Mg) than bulk eclogite compositions, owing to Ca–Mg exchange equilibrium between carbonates and silicates. Carbonates in natural mantle eclogite, which have low bulk CO₂ concentration, will have Ca/Mg buffered by reactions with silicates. Consequently, experiments with high bulk CO₂ may not mimic natural carbonated eclogite phase equilibria unless care is taken to ensure that CO₂ enrichment does not result in inappropriate equilibrium carbonate compositions. Compositions of eclogite-derived carbonate melt span the range of natural carbonatites from oceanic and continental settings. Ca#s of carbonatitic partial melts of eclogite vary significantly and overlap those of partial melts of carbonated lherzolite, however, for a constant Ca-content, Mg# of carbonatites derived from eclogitic sources are likely to be lower than the Mg# of those generated from peridotite.     

Connexion porphyre cuprifère–épithermaux de type low-sulfidation : analyse structurale et représentation 3D du secteur de Bolcana,monts Apuseni,Roumanie

The AuPbZn low-sulfidation epithermal ore deposits of Troita, Trestia, and Magura (Apuseni Mountains, Romania) are spatially related to the Bolcana Cu-porphyry. In an attempt to demonstrate the connection between these mineralizations, a geometric study was made based on structural measurements and GOCAD^© geomodeller 3D representation of deposits. This study indicates that a specific spatial distribution of the different Au and PbZn veins of the epithermal deposits occurs around the Cu-porphyry, which cannot result from telescoped systems. To cite this article: O. Cardon et al., C. R. Geoscience 337 (2005).     

Portales Valley: Petrology of a metallic‐melt meteorite breccia

Abstract— Portales Valley (PV) is an unusual metal‐veined meteorite that has been classified as an H6 chondrite. It has been regarded either as an annealed impact melt breccia, as a primitive achondrite, or as a meteorite with affinities to silicated iron meteorites. We studied the petrology of PV using a variety of geochemical‐mineralogical techniques. Our results suggest that PV is the first well‐documented metallic‐melt meteorite breccia. Mineral‐chemical and other data suggest that the protolith to PV was an H chondrite. The composition of FeNi metal in PV is somewhat fractionated compared to H chondrites and varies between coarse vein and silicate‐rich portions. It is best modeled as having formed by partial melting at temperatures of ?940–1150 °C, with incomplete separation of solid from liquid metal. Solid metal concentrated in the coarse vein areas and S‐bearing liquid metal concentrated in the silicate‐rich areas, possibly as a result of a surface energy effect. Both carbon and phosphorus must have been scavenged from large volumes and concentrated in metallic liquid. Graphite nodules formed by crystallization from this liquid, whereas phosphate formed by reaction between P‐bearing metal and clinopyroxene components, depleting clinopyroxene throughout much of the meteorite and growing coarse phosphate at metal‐silicate interfaces. Some phosphate probably crystallized from P‐bearing liquids, but most probably formed by solid‐state reaction at ?975‐725 °C. Phosphate‐forming and FeO‐reduction reactions were widespread in PV and entailed a change in the mineralogy of the stony portion on a large scale. Portales Valley experienced protracted annealing from supersolidus to subsolidus temperatures, probably by cooling at depth within its parent body, but the main differences between PV and H chondrites arose because maximum temperatures were higher in PV. A combination of a relatively weak shock event and elevated pre‐shock temperatures probably produced the vein‐and‐breccia texture, with endogenic heating being the main heat source for melting, and with stress waves from an impact event being an essential trigger for mobilizing metal. Portales Valley is best classified as an H7 metallic‐melt breccia of shock stage S1. The meteorite is transitional between more primitive (chondritic) and evolved (achondrite, iron) meteorite types and offers clues as to how differentiation could have occurred in some asteroidal bodies.     

Origins of compositional heterogeneity in olivine-hosted melt inclusions from the Baffin Island picrites

The Baffin Island picrites are highly magnesian (22 wt% MgO) olivine tholeiites, erupted through felsic continental crust. Plots of most major and minor element oxides against MgO for the lavas define very tight trends consistent with modification of melts parental to the erupted suite by olivine fractionation or accumulation. However, melt inclusions trapped in primitive olivine phenocrysts in these lavas have much more diverse compositions. After correction for post-entrapment modification, the inclusions are systematically slightly lower in Al₂O₃, and significantly higher in SiO₂, K₂O and P₂O₅ than the lavas fractionation trends. CaO, Na₂O and TiO₂ contents lie within the lavas fractionation trends. Similarly, most inclusions are higher in Sr/Nd, K/Nb, Rb/Ba, Rb/Sr, U/Nb and Ba/Th than the lavas. These characteristics resulted from up to 15% contamination of evolving picritic-basaltic liquids by locally-derived, broadly granitic partial melts of the quartz + feldspar-rich crust through which the picrites erupted. Contamination was minor in the bulk lavas (<1%), suggesting that the inclusions compositions partly reflect a link between wall rock reaction and precipitation of liquidus olivine. Rapid crystallisation of liquidus olivine from the picrites, along with melting of felsic crustal wall rocks of magma chambers or conduits, were likely during emplacement of hot picritic magmas into cooler felsic crust. Inclusion compositions may thus reflect mixing trends or may be constrained to phase boundaries between olivine and a phase being resorbed, for example, an olivine-plagioclase cotectic. The extent of contamination was probably a complex function of diffusion rates of components in the magmas, and phenocryst growth rates and proximity to wall rock. These results bear on the common observation that melt inclusions compositions are frequently more heterogeneous than those of the lavas that host them.     

Observations sur le mode de gisement et les conditions de mise en place des coulées volcaniques spilitisées de Peyrebrune (Région de Realmont) Tarn/France

In the district of Peyrebrune, several lava-flows are interstratified in a Cambrosilurian aged Schisto-Sandstone Series. The relationships between sediments and lavas, specified by a cut in detail, are the subject of a petrographic and sedimentologic study. According to this study each volcanic eruption is divided in two flows separated by a little amount of “mictites” (mixture of sediments which were rearranged during the eruption, and elements of volcanic origin). The upper flow is much than the lower one and is sometimes thicker cut in pillow-lavas. The mineralogical study shows that the center of the principal flow is made of albitic dolerite with preserved pyroxene and albite and that the boundaries up to one meter and also the lower flow have a spilitic composition. In one flow, taken for example, measurements of density show that the density is 2,99 in the center of the flow, and 2,81 in the boundaries. The chemical analyses indicate that the center has a hyperaluminous basaltic composition and that the more spilitified parts are considerably modified by:

• -Addition of Na (around 60 Kg by m³)
• -loss of Ca and Mg (corresponding to the possible formation of 350 Kg of magnesium calcarous by m³ of spilitified stony mass).