Upper Jurassic Radiolaria from the Vocontian basin of SE France

Two sections of the Vocontian basin (southeast France) were explored for their radiolarian content. Preservation in calcite impeded their extraction from the Châteauneuf d’Oze section, which is well dated by ammonites. Fortunately, oligospecific assemblages of pyritized radiolaria were yielded by twelve limestone beds of the Méouge section. In general, preservation worsens towards the top of the section. The extracted fauna is dominated by Nassellaria and more particularly by Archaeodictyomitridae, Pseudodictyomitridae and Williriedellidae. It is the first time that some species are reported outside their type area or from Western Tethys. Amongst the published zonations the scheme of Baumgartner et al. (1995a) is found to be the most useful and allows correlation of the studied part of the section with the mid-late Oxfordian to late Kimmeridgian-early Tithonian time interval.     

A Social Discount Rate for Climate Damage to Future Generations Based on Regulatory Law

This article examines the implications for the social discount rate for damage due to climate change if risk to future generations is handled in accordance with the laws regulating our handling of risk to contemporaries. The conclusions are the following. Under current law, neither geographic distance nor differences in wealth between risk creator and risk bearer play any part in establishing a standard of ‘reasonable care'. The concept of intergenerational justice requires these same principles to be applied in the intergenerational context too, implying a zero consumption rate of interest for climate damage. Assuming that the extent to which mitigation is at the expense of alternative investments is equal to society's marginal propensity to save, the social discount rate becomes society's marginal propensity to save times the long-term market rate of return on private investment, implying a social discount rate of around one per cent or a fraction of one per cent. This formula is exact under the assumption of average saving behaviour and by attributing consumption losses due to investment in damage prevention before damage occurs to the risk creator and after damage occurs to the risk bearer.     

Estimating bearing response in symmetric and asymmetric‐plan isolated buildings with rocking and torsion

A comprehensive approach is developed to estimate relevant design quantities—lateral deformations and axial forces—in isolation systems composed of lead–rubber bearings. The approach, applicable to symmetric and asymmetric‐plan systems, includes the effects of bidirectional excitation, rocking, and torsion; and is the culmination of previous work on this topic. The approach is based on nonlinear response history analysis of an isolated block using an advanced bearing model that incorporates the interaction between axial force and lateral response of the bearing, known as axial‐load effects. The rocking response of the system and peak axial forces are shown to depend on the isolation period, the normalized strength—or yield strength normalized by peak ground velocity, the ratios of rocking frequency about each horizontal axis to vertical frequency, and the normalized stiffness eccentricity. In an attempt to develop results widely applicable to asymmetric‐plan systems, eccentricity is introduced by varying the stiffnesses and strengths of individual bearings in an idealized, rectangular plan. This idealized system approach is shown to have limited success; when applied to actual asymmetric‐plan systems the design equations to estimate response are accurate for lateral deformations but err by up to 25% for axial forces. Copyright © 2006 John Wiley & Sons, Ltd.     

Twentieth Century Climate in the New York Hudson Highlands and the Potential Impacts on Eco-Hydrological Processes

During the 20th century the northeastern U.S.A. has undergone an annual temperature increase of 1 °C, the combined effect of winter warming and an increase in daily summer minimum temperatures. A significant cooling of spring through autumn in maximum air temperatures is also evident since 1950. Therefore, the primary objective of this study is to document these climate trends and variability over the last century. A secondary objective is to provide a preliminary analysis of how these changes may have impacted hydrologic and ecosystem processes. Specifically, with respect to ecosystem processes, we examine how the cooling of daytime maximum temperatures may have impacted plant respiration and biomass accumulation. The study site is the Black Rock Forest, an experimental forest located in Hudson Highlands of New York that has been maintained as a conservation area over the last 100 years. For the region centered about the forest, there exists a climate/weather record and an extensively maintained biomass record that extends continuously from the early part of the 20th century through present. With such an extensive physical and biological record to draw from, this forest provides a microcosm for studying how changes in 20th century local and regional climate may have impacted ecosystem processes such as species adaptation, biomass growth, and 20th century carbon sequestration. In a subsequent paper we will more extensively explore the relationship between this record of changing climate and eco-hydrological processes.     

Genesis of the Dordogne (France) high-purity silica placers

This article describes the formation of the principal French high-purity silica placer (source for electrometallurgy of silicon and ferrosilicon), the Boudeau deposit in Dordogne, and of one of its subordinate deposits, the Pays Brûlé deposit. Boudeau has always been considered to be a colluvial deposit, formed in a trap produced by extensional tectonism. The present work suggests a new genetic interpretation, based on a combined study of the deposits and their underlying rocks. It shows that the quartz gravel deposits, laid down by stream flow within braided channels, were reworked by karstic progressive sinking, and that the mechanism responsible for the increase in the thickness of the economic formations is cryptokarstic corrosion. This undercovers weathering process, which involves dissolution of karstifiable rocks (oolitic and bioclastic limestones) at their interface with a permeable, non-karstifiable cover composed of chemically pure quartz gravels in a sandy-argillaceous matrix. A typological study of the gravels provides a basis for tackling the problem of their origin and their purity. They seem to be derived mainly from the synmetamorphic quartz mobilisates of the stripped metamorphic units (the lower and upper gneiss units forming the western edge of the Massif Central). Lastly, a dynamic model is suggested for the genesis of the high-purity silica deposits of Dordogne.     

Identifying impact events within the lunar cataclysm from Ar–Ar ages and compositions of Apollo 16 impact melt rocks

Lunar impact melt breccias provide a unique record of the timing and frequency of collisional events during the early history of the inner Solar System prior to the development of a significant rock record on Earth. The predominance of ages clustering between 3.8 and 4.0 Ga was a major, unexpected discovery obtained from geochronological studies of lunar impact melts, and is the basis of the concept that a cataclysmic bombardment of large planetesimals struck the Earth and Moon, and possibly the entire inner Solar System, about 3.85 ± 0.10 billion years ago. As a test of the cataclysm hypothesis, we measured high-resolution (20–50 steps) ⁴⁰Ar–³⁹Ar age spectra on 25 samples of Apollo 16 impact melt breccias using a continuous laser heating system on sub-milligram fragments. Twenty-one of these 25 breccias produced multi-step plateaus that we interpret as crystallization ages, with 20 of these ages falling in the range 3.75–3.96 Ga. We propose that at least four different melt-producing impact events can be distinguished based on the ages, bulk compositions, and petrographic characteristics of Apollo 16 melt breccias. The recognition of multiple impact events within the Apollo 16 melt breccia suite shows that numerous impact events occurred on the lunar surface within a relatively narrow time interval, providing additional evidence of a heavy bombardment of the Moon during the early Archean.     

Deformation of two welded elastic half-spaces due to a long inclined tensile fault

The calculation of the deformation caused by shear and tensile faults is necessary for the investigation of seismic and volcanic sources. The solution of the two-dimensional problem of a long inclined shear fault in two welded half-spaces is well known. The purpose of this note is to present the corresponding solution for a tensile fault. Closed-form analytical expressions for the Airy stress function for a tensile line source in two welded half-spaces are first obtained. These expressions are then integrated analytically to derive the Airy stress function for a long tensile fault of arbitrary dip and finite width. Closed-form analytical expressions for the displacements and stresses follow immediately from the Airy stress function. These expressions are suitable for computing the displacement and stress fields around a long inclined tensile fault near an internal boundary.     

Flood Forecasting and Flood Warning in the Firth of Clyde, UK

Coastal flooding has caused significant damage to a number of communities around the Firth of Clyde in south-west Scotland, UK. The Firth of Clyde is an enclosed embayment affected by storm surge generated in the Northern Atlantic and propagated through the Irish Channel. In recent years, the worst flooding occurred on 5th January 1991 with the estimated damage of approximately £7M. On average, some £0.5M damage is caused each year by coastal flooding. With the latest climate change predictions suggesting increased storm activity and the expected increase in mean sea levels, these damages are likely to increase. In line with the expansion of flood warning provision in Scotland, the Scottish Environment Protection Agency (SEPA) has developed a flood warning system to provide local authorities and emergency services with up to 24 h warning of coastal flooding within the Firth of Clyde and River Clyde Estuary up to Glasgow City Centre. The Firth of Clyde flood warning system consists of linked 1-D and 2-D mathematical models of the Firth of Clyde and Clyde Estuary, and other software tools for data processing, viewing and generating warning messages. The general methodology adopted in its implementation was developed following extensive consultation with the relevant authorities, including local councils and police. The warning system was launched in October 1999 and has performed well during four winter flood seasons. The system currently makes forecasts four times a day and is the only operational coastal flood warning system in Scotland.This paper summarises the development of the warning system, gives a review of its operation since its launch in 1999 and discusses future developments in flood warning in Scotland.     

A composition-independent quantitative determination of the water content in silicate glasses and silicate melt inclusions by confocal Raman spectroscopy

A new approach was developed to measure the water content of silicate glasses using Raman spectroscopy, which is independent of the glass matrix composition and structure. Contrary to previous studies, the compositional range of our studied silicate glasses was not restricted to rhyolites, but included andesitic, basaltic and phonolitic glasses. We used 21 glasses with known water contents for calibration. To reduce the uncertainties caused by the baseline removal and correct for the influence of the glass composition on the spectra, we developed the following strategy: (1) application of a frequency-dependent intensity correction of the Raman spectra; (2) normalization of the water peak using the broad T–O and T–O–T vibration band at 850–1250 cm⁻¹ wavenumbers (instead of the low wavenumber T–O–T broad band, which appeared to be highly sensitive to the FeO content and the degree of polymerization of the melt); (3) normalization of the integrated Si-O band area by the total number of tetrahedral cations and the position of the band maximum. The calibration line shows a ±0.4 wt% uncertainty at one relative standard deviation in the range of 0.8–9.5 wt% water and a wide range of natural melt compositions. This method provides a simple, quick, broadly available and cost-effective way for a quantitative determination of the water content of silicate glasses. Application to silicate melt inclusions yielded data in good agreement with SIMS data.