Summer to Winter Diurnal Variabilities of Temperature and Water Vapour in the Lowermost Troposphere as Observed by HAMSTRAD over Dome C, Antarctica

The HAMSTRAD (H₂O Antarctica Microwave Stratospheric and Tropospheric Radiometers) microwave radiometer operating at 60?GHz (oxygen line, thus temperature) and 183?GHz (water vapour line) has been permanently deployed at the Dome C station, Concordia, Antarctica [75°06??S, 123°21??E, 3,233?m above mean sea level] in January 2010 to study long-term trends in tropospheric absolute humidity and temperature. The great sensitivity of the instrument in the lowermost troposphere helped to characterize the diurnal cycle of temperature and H₂O from the austral summer (January 2010) to the winter (June 2010) seasons from heights of 10 to 200?m in the planetary boundary layer (PBL). The study has characterized the vertical resolution of the HAMSTRAD measurements: 10?C20?m for temperature and 25?C50?m for H₂O. A strong diurnal cycle in temperature and H₂O (although noisier) has been measured in summertime at 10 m, decreasing in amplitude with height, and phase-shifted by about 4?h above 50?m with a strong H₂O?Ctemperature correlation (>0.8) throughout the entire PBL. In autumn, whilst the diurnal cycle in temperature and H₂O is less intense, a 12-h phase shift is observed above 30?m. In wintertime, a weak diurnal signal measured between 10 to 200?m is attributed to the methodology employed, which consists of monthly averaged data, and that combines air masses from different origins (sampling effect) and not to the imprint of the null solar irradiation. In situ sensors scanning the entire 24-h period, radiosondes launched at 2000 local solar time (LST) and European Centre for Medium-Range Weather Forecasts (ECMWF) analyses at 0200, 0800, 1400 and 2000 LST agree very well with the HAMSTRAD diurnal cycles for temperature and relatively well for absolute humidity. For temperature, HAMSTRAD tends to be consistent with all the other datasets but shows a smoother vertical profile from 10 to 100?m compared to radiosondes and in-situ data, with ECMWF profiles even smoother than HAMSTRAD profiles, and particularly obvious when moving from summer to winter. For H₂O, HAMSTRAD measures a much moister atmosphere compared to all the other datasets with a much weaker diurnal cycle at 10?m. Our study has helped characterize the time variation of the PBL at Dome C with a top around 200?m in summertime decreasing to 30?m in wintertime. In summer, from 2000 to 0600 LST a stable layer is observed, followed by a well-mixed layer the remaining time, while only a nocturnal stable layer remains in winter. In autumn, a daytime convective layer shallower than the nocturnal stable layer develops.     

Geochemical and isotopic constraints on the interaction between saline lakes and groundwater in southeast Australia

Major ion and stable isotope geochemistry allow groundwater/surface-water interaction associated with saline to hypersaline lakes from the Willaura region of Australia to be understood. Ephemeral lakes lie above the water table and locally contain saline water (total dissolved solids, TDS, contents up to 119,000 mg/L). Saline lakes that lack halite crusts and which have Cl/Br ratios similar to local surface water and groundwater are throughflow lakes with high relative rates of groundwater outflows. Permanent hypersaline lakes contain brines with TDS contents of up to 280,000 mg/L and low Cl/Br ratios due to the formation of halite in evaporite crusts. These lakes are throughflow lakes with relatively low throughflow rates relative to evaporation or terminal discharge lakes. Variations in stable isotope and major ion geochemistry show that the hypersaline lakes undergo seasonal cycles of mineral dissolution and precipitation driven by the influx of surface water and evaporation. Despite the generation of highly saline brines in these lakes, leakage from the adjacent ephemeral lakes or saline throughflow lakes that lack evaporite crusts is mainly responsible for the high salinity of shallow groundwater in this region.     

The influence of paleoclimatic events on the functioning of an alpine thermal system (France): the contribution of hydrodynamic–thermal modeling

Numerical models of the Aix-les-Bains thermal aquifer (France) were used to investigate the influence of Quaternary paleoclimatic events on the current thermal state of the groundwater. Initial numerical tests were successful in that present-day fluid flows (heads and flow rates) and the resulting velocities were compatible with residence time data. Water flowing through an aquifer cools the rock mass; therefore, the rate of water flow governs the outlets temperature. For the Aix-les-Bains aquifer, applying present-day flow rates to the entire history of the aquifer leads to much more substantial cooling of the rock mass than is indicated by the outlets temperature (i.e. present-day flow rates are 10 times too high). This suggests that the aquifer may have gone through alternating functioning phases, during which the rock mass cooled, and blocked phases, during which the aquifer reheated. Other results indicate that the main parameters affecting thermal behavior during a functioning phase are the total inflow volume, rather than individual inflow rates, and the initial heat field. As phenomena linked to glaciation can lead to the blocking of infiltration zones and aquifer outlets, the findings suggest that the hypothesis of intermittent aquifer functioning related to glaciations is compatible with the current thermal field.     

Effect of salt of various concentrations on liquid limit,and hydraulic conductivity of different soil-bentonite mixtures

Effect of the various concentrations of NaCl and CaCl₂ on the four different soil-bentonite mixtures has been evaluated. The results show that the liquid limit of the mixtures decreases with an increase in the salt concentration. Liquid limit decreased significantly with an increase in CaCl₂ concentration from 0 to 0.1 N. However, a further increase in the concentration did not produce any significant decrease in liquid limit. A quite opposite trend was observed for the NaCl solution. An increase in NaCl concentration from 0 to 0.1 N did not produce any major decrease in the liquid limit, but a further increase in concentration from 0.1 to 1 N decreased the liquid limit significantly. Consolidation tests were carried out on the mixtures to evaluate the effect of mineralogical composition of the bentonite on the hydraulic conductivity (k) of the mixture in the presence of various salts concentrations. The k for any mixtures was found to be decreasing with decrease in the salt concentration. At relatively low concentration, Ca²⁺ had more effect on the k in comparison to the same concentration of Na⁺. However, at 1 N of NaCl and CaCl₂ almost an equal value of k was observed. A comparison of the performance of four bentonites showed that the mixture with bentonite having highest exchangeable sodium percentage (ESP) exhibited the lowest k when permeated with de-ionized (DI) water, however, k increased with an increase in the salt concentration. Similarly, mixture with a bentonite of lower ESP exhibited a higher k with DI water but with the increase in the salt concentration alteration in the k, compared to all other mixtures, was relatively less.     

Hydrothermal jarosite and hematite in a pyroxene-hosted melt inclusion in martian meteorite Miller Range (MIL) 03346: Implications for magmatic-hydrothermal fluids on Mars

Low-temperature aqueous processes have been implicated in the generation of jarosite and hematite on the martian surface, but little is known regarding the role that high-temperature magmatic fluids may have played in producing similar assemblages on Mars. We have identified jarosite and hematite in a clinopyroxene-hosted melt inclusion in martian meteorite MIL 03346 that shows evidence of having been hydrothermally precipitated. In addition to jarosite and hematite, the melt inclusion contains titanomagnetite, pyrrhotite, potassic-chlorohastingsite, an iron-rich silicate glass and possibly goethite. These phases were identified and characterized using scanning electron microscopy (SEM), con-focal Raman-spectroscopy and electron probe microanalysis (EPMA).Based on observed textural relationships and the compositions of the hosted phases, we report that the jarosite-bearing melt inclusion in MIL 03346 has recorded a fluid-rich history that began in the magmatic stage and continued to low-temperatures. This history begins at entrapment of a volatile-rich silicate melt that likely reached fluid-saturation after only minor crystallization within the melt inclusion. This fluid, rich in chlorine, reacted with surrounding silicate material to produce the potassic-chlorohastingsite. As cooling proceeded, the liquid phase eventually became more oxidized and reacted with the pyrrhotite. Sulfide oxidation resulted in SO₄²⁻ formation and concomitant acid production, setting the stage for jarosite formation once the fluid cooled beyond the upper thermal stability of jarosite (∼200 °C). As the fluid cooled below 200 °C, jarosite continued to precipitate with hematite and/or goethite until equilibrium was established or reactions became kinetically unfavorable.This work suggests an additional jarosite-hematite formation pathway on Mars; one that may be important wherever magmatic-hydrothermal fluids come into contact with primary sulfide grains at the martian surface or subsurface. Moreover, hydrothermal fluids rich in chlorine, sulfur, and iron are important for ore-forming processes on Earth, and their indirect identification on Mars may have important implications for ore-formation on Mars.     

Depositional processes and the inferred history of ice-margin retreat associated with the deglaciation of the Cordilleran Ice Sheet: The sedimentary record from Flathead Lake,northwest Montana,USA

A series of piston cores from Flathead Lake, Montana, USA and a new radiocarbon date from the sedimentary record provide the basis for describing sedimentary processes related to deglaciation of the Flathead Lobe of the Cordilleran Ice Sheet and for interpreting the retreat history of the lobe. The oldest part of Flathead Lake sediment core records is Late Pleistocene in age and consists of cm-scale rhythmites of silt and clay, interpreted here as annual varves. Each varve contains a light-colored coarser-grained portion, inferred to represent deposition during peak annual runoff, and a darker-colored finer-grained portion interpreted to represent sediment accumulation during seasonal low-flow conditions. The coarser-grained portions, especially in the stratigraphically older sections of each core, contain sedimentary structures that reflect traction transport. Based on these sedimentary structures, their facies characteristics, and their spatial distribution within the lake, we interpret the thicker, light-colored portion of each varve to be deposited by hyperpycnal flows caused by seasonal melt events rather than more classic turbidity currents.Immediately overlying Late Pleistocene rhythmites in all Flathead Lake cores is a unique, significantly coarser-grained dm-scale silt bed with a median grain size up to 50 µm. This silt bed has a sharp, locally erosional base and fines upward but does not contain any other sedimentary structures. In contrast to the rhythmites, we interpret this silt bed to represent a single, short-lived catastrophic sedimentation event generated by a large glacial outburst flood. Overlying this distinct bed are several other cm-scale beds of mainly silt that exhibit a basal upward-coarsening followed by an upward-fining median grain size profile. We interpret these beds and their grain size trends as reflecting the rising and falling hydrograph limbs of outburst floods derived from more distal sources located in the upstream parts of the upper Flathead watershed.The sediment record from Flathead Lake, together with results from geologic and geomorphologic 1:24,000 scale mapping around the lake margins, provide a series of constraints regarding the paleogeographic evolution of the area during deglaciation. Overall upward-thinning and upward-fining of the varved portion of the sediment core records reflects northward retreat of the southern Flathead Lobe ice margin starting at latest 14,475 ± 150 cal yr BP, the depositional age of the oldest varve in any of our cores. The depositional age of silt beds overlying the varved records is constrained as between 14,150 ± 150 cal yr BP and 13,180 ± 120 cal yr BP. Within the available chronostratigraphic constraints, the outburst floods interpreted to have delivered this silt to the Flathead Lake basin also downcut a bedrock nick point below the Flathead Lake outlet, oriented a series of large boulders downstream, and deposited a series of large flood bars on the lower Flathead River floodplain.     

The Use of Rock Mass Classification Systems to Estimate the Modulus and Strength of Jointed Rock

Three-dimensional, elastic and elasto-plastic finite element (FE) programs have permitted calculation of the displacements and the factor of safety (FOS) for the excavation for a tower, 132.70 m high (above foundation) on the island of Tenerife. The tower is supported by a 2 m thick reinforced concrete slab on jointed, vesicular and weathered basalt and scoria. The installation of rod extensometers at different depths below the slab has permitted comparison between measured and calculated displacements and the estimation of in situ deformation modulus. The moduli deduced from the simple empirical equations proposed by Hoek et al. (In: NARMS-TAC, 2002) and Gokceoglu et al. (Int J Rock Mech Min Sci 40:701–710, 2003) as a function of GSI, and Nicholson and Bieniawski (Int J Min Geol Eng 8:181–202, 1990) as a function of RMR, provide an acceptable fit with the measured settlements in this type of rock. Good correlation is also obtained with the empirical equation presented by Verman et al. (Rock Mech Rock Eng 30(3):121–127, 1997) that incorporates the influence of confining stress in the deformation modulus. The FOS obtained from different correlations with geomechanical classifications is within a relatively narrow range. These results increase our confidence in the use of classification schemes to estimate the deformation and stability in jointed rock.     

Multiresolution and Multispectral Data Fusion Using Discrete Wavelet Transform with IRS Images: Cartosat-1, IRS LISS III and LISS IV

Image fusion techniques integrate complimentary information from multiple image sensor data such that the new images are more suitable for the purpose of human visual perception and computer based processing tasks for extraction of detail information. As an important part of image fusion algorithms, pixel-level image fusion can combine spectral information of coarse resolution imagery with finer spatial resolution imagery. Ideally, the method used to merge data sets with high-spatial and highspectral resolution should not distort the spectral characteristics of the high-spectral resolution data. This paper describes the Discrete Wavelet Transform (DWT) algorithm for the fusion of two images using different spectral transform methods and nearest neighbor resampling techniques. This research paper investigates the performance of fused image with high spatial resolution Cartosat-1(PAN) with LISS IV and Cartosat-1(PAN) sensor images with the LISS III sensor image of Indian Remote Sensing satellites. The visual and statistical analysis of fused images has shown that the DWT method outperforms in terms of Geometric, Radiometric, and Spectral fidelity.