Rates of rockwall slope erosion in the upper Bhagirathi catchment,Garhwal Himalaya

Rockwall slope erosion is defined for the upper Bhagirathi catchment using cosmogenic Beryllium-10 (¹⁰Be) concentrations in sediment from medial moraines on Gangotri glacier. Beryllium-10 concentrations range from 1.1 ± 0.2 to 2.7 ± 0.3 × 10⁴ at/g SiO₂, yielding rockwall slope erosion rates from 2.4 ± 0.4 to 6.9 ± 1.9 mm/a. Slope erosion rates are likely to have varied over space and time and responded to shifts in climate, geomorphic and/or tectonic regime throughout the late Quaternary. Geomorphic and sedimentological analyses confirm that the moraines are predominately composed of rockfall and avalanche debris mobilized from steep relief rockwall slopes via periglacial weathering processes. The glacial rockwall slope erosion affects sediment flux and storage of snow and ice at the catchment head on diurnal to millennial timescales, and more broadly influences catchment configuration and relief, glacier dynamics and microclimates. The slope erosion rates exceed the averaged catchment-wide and exhumation rates of Bhagirathi and the Garhwal region on geomorphic timescales (10³−10⁵ years), supporting the view that erosion at the headwaters can outpace the wider catchment. The ¹⁰Be concentrations of medial moraine sediment for the upper Bhagirathi catchment and the catchments of Chhota Shigri in Lahul, northern India and Baltoro glacier in Central Karakoram, Pakistan show a tentative relationship between ¹⁰Be concentration and precipitation. As such there is more rapid glacial rockwall slope erosion in the monsoon-influenced Lesser and Greater Himalaya compared to the semi-arid interior of the orogen. Rockwall slope erosion in the three study areas, and more broadly across the northwest Himalaya is likely governed by individual catchment dynamics that vary across space and time. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons, Ltd.     

南北地震带北段深部构造特征

本文利用重力资料,采用单层地壳模式反演南北地震带北段的地壳厚度.根据艾利均衡假设,进行均衡补偿归算.编制莫氏界面图和11均衡异常图.根据地壳构造特征,划分六个地壳构造区.对天水-文县间立交构造格架进行初步的探讨.结合历史地震资料,讨论了地壳构造、均衡异常与地震的关系.     

Utilization of a multicriteria least cost path model in an aquatic environment

A critical component of maintaining biodiversity in fragmented habitats is maintaining connectivity among the usable fragments. Least cost path (LCP) analysis is a tool that can be used for predicting the ability of an organism to move from one habitat patch to another, based on geographical features of the landscape and life history traits of the organism. While this analysis has been utilized for terrestrial habitats, it is rarely applied to aquatic environments. Aquatic hypoxic conditions occur when dissolved oxygen falls below 2 mg/L. These conditions can create barriers in the water column that can either force fish to leave a habitat, or avoid that habitat altogether. Using the lower St. Johns River (LSJR) estuary in Florida, USA, as a study system, the ability of an adult silver perch, Bairdiella chrysoura, to escape a large-scale hypoxic event was modeled using a multicriteria LCP approach. Criteria-specific cost grids were constructed based upon current speed, risk of predation, and whether oxygen levels in the habitat area were normoxic (>5.5 mg/L), or hypoxic (<2.0–1.5 mg/L) as a function of water depth for the LSJR. The criteria cost grids were combined using relative weighting to produce the multicriteria cost grid used to implement the LCP analysis. Three origin and destination point locations within the LSJR study area were selected for modeling whether or not a silver perch would be able to escape a hypoxic zone. Since the LCP model will always determine a LCP from the specified origin point location, ecologically relevant swimming capacities for silver perch under normoxic and hypoxic conditions were then applied to assess the model, and to determine whether the fish would be able to reach areas unimpacted by hypoxia. The LCP model and the swimming capacity results for this study predict that under normoxic conditions, fish movement was unimpeded. During the rapidly developing hypoxic event that was modeled, the results from the LCP model indicate that the fish could move outside the hypoxic zone, but when swimming capacities were applied to the model, the silver perch could not escape. Ecologically, the results of this study suggest that silver perch would experience high mortality under a rapidly developing hypoxic event. Additionally, the results of this study indicate that a LCP model can be applied to an aquatic habitat, as long as the cost grids incorporate relevant abiotic and biotic factors.     

Vibration of hydraulic vessels

Summary The present paper is a continuation of a previous study by the author(1), dealing with expansion waves in fluids. Relating to hydro-dynamic effects due to harmonic vibrations, with special reference to earthquakes, it contains solutions for some rigid-walled vessels of geometrically determined shape. A salient feature of the problem is that the motion is assumed discontinuous in the sense that it starts from the initial condition of rest.     

Glacial mass balance changes in the Karakoram and Himalaya based on CMIP5 multi-model climate projections

The impact of future climate change on the glaciers in the Karakoram and Himalaya (KH) is investigated using CMIP5 multi-model temperature and precipitation projections, and a relationship between glacial accumulation-area ratio and mass balance developed for the region based on the last 30 to 40 years of observational data. We estimate that the current glacial mass balance (year 2000) for the entire KH region is -6.6?±?1 Gta^?1, which decreases about sixfold to -35?±?2 Gta^?1 by the 2080s under the high emission scenario of RCP8.5. However, under the low emission scenario of RCP2.6 the glacial mass loss only doubles to -12?±?2 Gta^?1 by the 2080s. We also find that 10.6 and 27 % of the glaciers could face ‘eventual disappearance’ by the end of the century under RCP2.6 and RCP8.5 respectively, underscoring the threat to water resources under high emission scenarios.     

The effects of surface area, grain size and mineralogy on organic matter sedimentation and preservation across the modern Squamish Delta, British Columbia: the potential role of sediment surface area in the formation of petroleum source rocks

Surface sediment samples were collected from the Squamish River Delta, British Columbia, in order to determine the role of sediment surface area in the preservation of organic matter (OM) in a paralic sedimentary environment. The Squamish Delta is an actively prograding delta, located at the head of Howe Sound.Bulk total organic carbon (TOC) values across the Squamish Delta are low, ranging from 0.1 to 1.0 wt.%. The carbon/total nitrogen ratio (C_org/N) ranges from 6 to 17, which is attributed to changes in OM type and facies variations. The <25-μm fraction has TOC concentrations up to 2.0 wt.%, and a C_org/N ratio that ranges from 14 to 16. The 53–106-μm fraction has higher TOC concentrations and C_org/N ratios relative to the 25–53-μm fraction. The C_org/N ratio ranges from 9 to 18 in the 53–106-μm fraction and 5.5–10.5 in the 25–53-μm fraction. Surface area values for bulk sediments are low (0.5–3.0 m²/g) due to the large proportion of silt size material. Good correlation between surface area and TOC in bulk samples suggests that OM is adsorbed to mineral surfaces. Similar relationships between surface area and TOC were observed in size-fractionated samples. Mineralogy and elemental composition did not correlate with TOC concentration.The relationships between surface area, TOC and total nitrogen (TN) can be linked to the hydrodynamic and sedimentological conditions of the Squamish Delta. As a result, the Squamish Delta is a useful modern analogue for the formation of petroleum source rocks in ancient deltaic environments, where TOC concentrations are often significantly lower than those in source rocks formed in other geological settings.     

Oxygen isotopic constraints on the origin of Mg-rich olivines from chondritic meteorites

Chondrules are the major high temperature components of chondritic meteorites which accreted a few millions years after the oldest solids of the solar system, the calcium–aluminum-rich inclusions, were condensed from the nebula gas. Chondrules formed during brief heating events by incomplete melting of solid dust precursors in the protoplanetary disk. Petrographic, compositional and isotopic arguments allowed the identification of metal-bearing Mg-rich olivine aggregates among the precursors of magnesian type I chondrules. Two very different settings can be considered for the formation of these Mg-rich olivines: either a nebular setting corresponding mostly to condensation–evaporation processes in the nebular gas or a planetary setting corresponding mostly to differentiation processes in a planetesimal. An ion microprobe survey of Mg-rich olivines of a set of type I chondrules and isolated olivines from unequilibrated ordinary chondrites and carbonaceous chondrites revealed the existence of several modes in the distribution of the ?¹⁷O values and the presence of a large range of mass fractionation (several ‰) within each mode. The chemistry and the oxygen isotopic compositions indicate that Mg-rich olivines are unlikely to be of nebular origin (i.e., solar nebula condensates) but are more likely debris of broken differentiated planetesimals (each of them being characterized by a given ?¹⁷O). Mg-rich olivines could have crystallized from magma ocean-like environments on partially molten planetesimals undergoing metal–silicate differentiation processes. Considering the very old age of chondrules, Mg-rich olivine grains or aggregates might be considered as millimeter-sized fragments from disrupted first-generation differentiated planetesimals. Finally, the finding of only a small number of discrete ?¹⁷O modes for Mg-rich olivines grains or aggregates in a given chondrite suggests that these shattered fragments have not been efficiently mixed in the disk and/or that chondrite formation occurred in the first vicinity of the breakup of these planetary bodies.     

Modelling river water temperature using deterministic,empirical, and hybrid formulations in a Mediterranean stream

River water temperature is a common target of water quality models at the watershed scale, owing to its principal role in shaping biogeochemical processes and in stream ecology. Usually, models include physically‐based, deterministic formulations to calculate water temperatures from detailed meteorological information, which usually comes from meteorological stations located far from the river reaches. However, alternative empirical approaches have been proposed, that usually depend on air temperature as master variable. This study explored the performance of a semidistributed water quality application modelling river water temperature in a Mediterranean watershed, using three different approaches. First, a deterministic approach was used accounting for the different heat exchange components usually considered in water temperature models. Second, an empirical approximation was applied using the equilibrium temperature concept, assuming a linear relationship with air temperature. And third, a hybrid approach was constructed, in which the temperature equilibrium concept and the deterministic approach were combined. Results showed that the hybrid approach gave the best results, followed by the empirical approximation. The deterministic formulation gave the worst results. The hybrid approach not only fitted daily river water temperatures, but also adequately modelled the daily temperature range (maximum–minimum daily temperature). Other river water features directly dependent on water temperature, such as river intrusion depth in lentic systems (i.e. the depth at which the river inflow plunges to equilibrate density differences with lake water), were also correctly modelled even at hourly time steps. However, results for the different heat fluxes between river and atmosphere were very unrealistic. Although direct evidence of discrepancies between meteorological drivers measured at the meteorological stations and the actual river microclimate was not found, the use of models including empirical or hybrid formulations depending mainly on air temperature is recommended if only meteorological data from locations far from the river reaches are available. Copyright © 2008 John Wiley & Sons, Ltd.