Characterization of seasonal local recharge using electrical resistivity tomography and magnetic resonance sounding

A groundwater recharge process of heterogeneous hard rock aquifer in the Moole Hole experimental watershed, south India, is being studied to understand the groundwater flow behaviour. Significant seasonal variations in groundwater level are observed in boreholes located at the outlet area indicating that the recharge process is probably taking place below intermittent streams. In order to localize groundwater recharge zones and to optimize implementation of boreholes, a geophysical survey was carried out during and after the 2004 monsoon across the outlet zone. Magnetic resonance soundings (MRS) have been performed to characterize the aquifer and measure groundwater level depletion. The results of MRS are consistent with the observation in boreholes, but it suffers from degraded lateral resolution. A better resolution of the regolith/bedrock interface is achieved using electrical resistivity tomography (ERT). ERT results are confirmed by resistivity logging in the boreholes. ERT surveys have been carried out twice—before and during the monsoon—across the stream area. The major feature of recharge is revealed below the stream with a decrease by 80% of the calculated resistivity. The time‐lapse ERT also shows unexpected variations at a depth of 20 m below the slopes that could have been interpreted as a consequence of a deep seasonal water flow. However, in this area time‐lapse ERT does not match with borehole data. Numerical modelling shows that in the presence of a shallow water infiltration, an inversion artefact may take place thus limiting the reliability of time‐lapse ERT. A combination of ERT with MRS provides valuable information on structure and aquifer properties respectively, giving a clue for a conceptual model of the recharge process: infiltration takes place in the conductive fractured‐fissured part of the bedrock underlying the stream and clayey material present on both sides slows down its lateral dissipation. Copyright © 2007 John Wiley & Sons, Ltd.     

Telescope and instrument robotization at Dome C

This article reviews the situation for robotization of telescopes and instruments at the Antarctic station Concordia on Dome C. A brain‐storming meeting was held in Tenerife in March 2007 from which this review emerged.We describe and summarize the challenges for night‐time operations of various astronomical experiments at conditions “between Earth and Space” and conclude that robotization is likely a prerequisite for continuous astronomical data taking during the 2000‐hour night at Dome C. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Contrasting volcanic-tectonic processes during the past 2 Ma on the Mid-Atlantic Ridge: submersible mapping,petrological and magnetic results at lat. 34°52′ N and 33°55′ N

In August–September of 1995, 20 Nautile dives and detailed magnetic surveys (spaced every 1.8 km) were undertaken on two segments of the Mid-Atlantic Ridge between the Oceanographer and Hayes fractures zones. These two segments are only 65 km apart and show strong morphology and gravity contrasts. OH1 is shallower and has a large mantle Bouguer anomaly (MBA) bull's eye, whereas OH3 is deeper and has a smaller MBA bull's eye.Thirteen dives were devoted to segment OH1. The Median Ridge (MR) located on the central high (1700 m deep) is topped by 100 to 300 m high circular volcanoes. The volcanics consists mainly of porphyritic and/or vesicular pillows and volcaniclastics. The NVZ (2200 m deep), located in the valley floor east of the MR, consists of near aphyric fluid lava flows. A chain of off-axis volcanoes, displaying a magnetic continuity with surroundings, extends on both sides of the axis. Three volcanoes on the east side and one on the west side of the axis were explored and sampled by submersible. The off-axis increase of weathering, Fe-Mn coating and magnetic signature suggest that the volcanoes were built at or near the ridge axis. The spacing of NS elongated hills bearing circular volcanoes and separated large magnetic signature (2 to 4 km) depressions suggests that several similar volcanic events occured during the past 2 Ma. The last 1 Ma episode involves (1) the construction of an axial ridge (MR) by fissure eruptions and the formation of circular summit volcanoes by focused volcanism, and (2) the extrusion of fluid magma in the depressions formed by further fissuring and faulting of the MR.     

Aerial magnetic mapping with an unmanned aerial vehicle and a fluxgate magnetometer: a new method for rapid mapping and upscaling from the field to regional scale

Magnetic measurements with an unmanned aerial vehicle are ideal for filling the gap between ground and airborne magnetic surveying. However, to obtain accurate aeromagnetic data, the compensation of magnetic effects of the unmanned aerial vehicle is a challenge. Typically, scalar magnetometers are towed several metres under the unmanned aerial vehicle to minimize its magnetic field. In this study, a fluxgate three-component magnetometer is attached 42 cm in front of the unmanned aerial vehicle at the tip of a composite pipe. Using a scalar calibration, the sensor can be calibrated, and the permanent and induced magnetic fields of the unmanned aerial vehicle can be compensated. The contributions of the magnetic measurements at different altitudes to the unmanned aerial vehicle results were tested over an area of 1 km² in the Northern Vosges Mountains. The area is located in a hamlet surrounded by a forest where few geological outcrops are observed. Three magnetic surveys of the same area are obtained at different altitudes: 100, 30 and 1 m above the ground. The unmanned aerial vehicle magnetic data are compared with a helicopter aeromagnetic survey at 300 m above the ground and a ground magnetic survey using upward continuations of the maps to compare the results. The magnetic maps (300, 100, 30 and 1 m above the ground) show very different magnetic anomaly patterns (e.g. amplitude, shape, wavelength and orientation). The magnetic data at different altitudes improve the understanding of the geology from the local to more general scales.     

On-site and off-site material preparation pavement approaches on particle emission and associated health impacts on workers

Stochastic Environmental Research and Risk Assessment - The resurfacing of urban road networks is a prevalent practice for extending their life and therefore shares an important contribution to the...     

Seismic retrofit of MRF buildings using decentralized semi‐active control for multi‐target performances

Numerous structures have been designed and built without taking earthquake ground motions or outdated seismic design codes into account. In order to improve the seismic performance of existing structures, many retrofit approaches based on performance‐based design have been developed. However, some of these approaches are inapplicable due to structural limitations or because they were developed with the assumption of single‐degree‐of‐freedom, which does not take higher modes into account. To overcome the limitations of these traditional methods, a multi‐performance‐based control design (MPBCD) methodology has been proposed by integrating a decentralized semi‐active control algorithm, magnetorheological dampers, and an advanced multi‐objective optimization method to provide various sets of retrofit control designs to satisfy multiple target performances under multiple seismic intensities without changing structural cross‐section sizes or material properties. This MPBCD method provides engineers with numerous sets of control designs (i.e., control device layouts with control design parameters) to help them select proper control designs to retrofit existing building structures and improve seismic performance. Copyright © 2016 John Wiley & Sons, Ltd.     

Shifting dynamics of nature,society and agriculture in the Hindu Kush Himalayas: Perspectives for future mountain development

Current approaches for sustainable mountain development have several persisting warning signals. Economic globalization, profitoriented market development, and infrastructure development have significantly altered traditional nature-society interactions, increased environmental pressures, and challenged agricultural sustainability in the mountains. Some of the effects of globalization could also be beneficial. Social differentiation and disintegration of mountain communities' have weakened their collective stakes on natural resources resulting in decline in initiatives such as community forestry, collective water management, domestication of rapidly disappearing herbal species, and balancing of economic and ecological concerns. Population growth, food insecurity, unemployment, and increasing economic gaps between rich and poor have led to out-migration of youth. Sustained action promoting ownership of new initiatives for rehabilitating degraded mountain landscapes through macro-level global/national initiatives, mountain specific planning and development efforts is severely lacking in many areas on the Hindu Kush Himalayan region. Therefore, there is an urgent need for widening the scope of efforts directed to help mountain areas and communities, and a future thinking approach to enhance the sustainability of mountain areas as they are a valuable natural resource for humankind. This paper discusses the issues, opportunities, and provides suggestions for the future of mountain development.