Evolution of fault zones in carbonates with mechanical stratigraphy – Insights from scale models using layered cohesive powder

We present analogue models of the formation of dilatant normal faults and fractures in carbonate fault zones, using cohesive hemihydrate powder (CaSO₄·½H₂O). The evolution of these dilatant fault zones involves a range of processes such as fragmentation, gravity-driven breccia transport and the formation of dilatant jogs. To allow scaling to natural prototypes, extensive material characterisation was done. This showed that tensile strength and cohesion depend on the state of compaction, whereas the friction angle remains approximately constant. In our models, tensile strength of the hemihydrate increases with depth from 9 to 50 Pa, while cohesion increases from 40 to 250 Pa. We studied homogeneous and layered material sequences, using sand as a relatively weak layer and hemihydrate/graphite mixtures as a slightly stronger layer. Deformation was analyzed by time-lapse photography and Particle Image Velocimetry (PIV) to calculate the evolution of the displacement field. With PIV the initial, predominantly elastic deformation and progressive localization of deformation are observed in detail. We observed near-vertical opening-mode fractures near the surface. With increasing depth, dilational shear faults were dominant, with releasing jogs forming at fault-dip variations. A transition to non-dilatant shear faults was observed near the bottom of the model. In models with mechanical stratigraphy, fault zones are more complex. The inferred stress states and strengths in different parts of the model agree with the observed transitions in the mode of deformation.     

The Correlation Structure of Matheron's Classical Variogram Estimator Under Elliptically Contoured Distributions

The classical variogram estimator proposed by Matheron can be written as a quadratic form of the observations. When data have an elliptically contoured distribution with constant mean, the correlation between the classical variogram estimator at two different lags is a function of the spatial design matrix, the covariance matrix, and the kurtosis. Several specific cases are studied closely. A subclass of elliptically contoured distributions with a particular family of covariance matrices is shown to possess exactly the same correlation structure for the classical variogram estimator as the multivariate independent Gaussian distribution. The consequences on variogram fitting by generalized least squares are discussed.     

Isothermal compression of an eclogite from the Western Gneiss Region (Norway)

In the Western Gneiss Region in Norway, mafic eclogites form lenses within granitoid orthogneiss and contain the best record of the pressure and temperature evolution of this ultrahigh-pressure (UHP) terrane. Their exhumation from the UHP conditions has been extensively studied, but their prograde evolution has been rarely quantified although it represents a key constraint for the tectonic history of this area. This study focused on a well-preserved phengite-bearing eclogite sample from the Nordfjord region. The sample was investigated using phase-equilibrium modelling, trace-element analyses of garnet, trace- and major-element thermobarometry and quartz-in-garnet barometry by Raman spectroscopy. Inclusions in garnet core point to crystallization conditions in the amphibolite facies at 510–600°C and 11–16 kbar, whereas chemical zoning in garnet suggests growth during isothermal compression up to the peak pressure of 28 kbar at 600°C, followed by near-isobaric heating to 660–680°C. Near-isothermal decompression to 10–14 kbar is recorded in fine-grained clinopyroxene–amphibole–plagioclase symplectites. The absence of a temperature increase during compression seems incompatible with the classic view of crystallization along a geothermal gradient in a subduction zone and may question the tectonic significance of eclogite facies metamorphism. Two end-member tectonic scenarios are proposed to explain such an isothermal compression: Either (1) the mafic rocks were originally at depth within the lower crust and were consecutively buried along the isothermal portion of the subducting slab or (2) the mafic rocks recorded up to 14 kbar of tectonic overpressure at constant depth and temperature during the collisional stage of the orogeny.     

Major and Trace Element Analysis of Silicate Rocks by XRF and Laser Ablation ICP-MS Using Lithium Borate Fused Glasses: Matrix Effects, Instrument Response and Results for International Reference Materials

Major and trace element compositions of fifteen silicate rock reference materials have been determined by a combined XRF and laser ablation ICP‐MS (LA‐ICP‐MS) technique on glasses prepared by fusing the sample with a lithium borate flux (sample:flux = 1:3). Advantages of this technique include the ability to measure major and trace element abundances on a single sample using a quick and simple preparation that attacks resistant phases such as zircon without the need for acid dissolution. The method is suitable for a wide variety of bulk compositions including mafic, intermediate and silicic rocks. Abundance‐normalized mass response patterns (the ratio of signal intensity to element concentration) of the LA‐ICP‐MS analyses vary systematically with major element composition, demonstrating the presence of a matrix effect that cannot be compensated by normalisation to a single internal standard element. Increasing the sampling distance between the ICP‐MS cone and the torch reduces the magnitude of this effect, suggesting that a mechanism related to residence time of ablated particles in the plasma may be at least partially responsible for the observed variations in mass response patterns. When using a matrix‐matched calibration, agreement of the LA‐ICP‐MS results with published reference values or those obtained by solution ICP‐MS is 10% relative. Analytical precision based on replicate analyses is typically 5% RSD. Procedural detection limits that include contributions from gas background and flux are 0.01‐0.1 μg g‐¹ for the heavy mass trace elements (Rb‐U). Major element analyses by XRF show excellent agreement with results obtained using a conventional heavy element absorbing flux. High quality major and trace element data for silicate rocks can be achieved by a combined XRF and LA‐ICP‐MS analysis of Li₂B₄O₇/LiBO₂ fused glasses provided an appropriate matrix‐matched calibration is adopted.     

Microscale oxygen isotope variations in 1.9 Ga Gunflint cherts: Assessments of diagenesis effects and implications for oceanic paleotemperature reconstructions

Variations in the oxygen isotope composition (δ¹⁸O) of five cherts from the 1.9 Ga Gunflint iron formation (Canada) were studied at the micrometer scale by ion microprobe to try to better understand the processes that control δ¹⁸O values in cherts and to improve seawater paleotemperature reconstructions. Gunflint cherts show clearly different δ¹⁸O values for different types of silica with for instance a difference of ≈15‰ between detrital quartz and microquartz. Microquartz in the five samples is characterized by large intra sample variations in δ¹⁸O values, (δ¹⁸O of quartz varies from 4.6‰ to 6.6‰ at the 20 μm scale and from ≈12‰ to 14‰ at 2 μm scale). Isotopic profiles in microquartz adjacent to hydrothermal quartz veins demonstrate that microquartz more than ≈200 μm away from the veins has preserved its original δ¹⁸O value.At the micrometer spatial resolution of the ion probe, data reveal that microquartz has preserved a considerable δ¹⁸O heterogeneity that must be regarded as a signature inherited from its diagenetic history. Modelling of the δ¹⁸O variations produced during the diagenetic transformation of sedimentary amorphous silica precursors into microquartz allows us to calculate seawater temperature (T_sw at which the amorphous silica precipitated) and diagenesis temperature (T_diagenesis at which microquartz formed) that reproduce the δ¹⁸O distributions (mean, range and shape) measured at micrometer scale in microquartz. The two critical parameters in this modelling are the δ¹⁸O value and the mass fraction of the diagenetic fluid. Under these assumptions, the most likely ranges for T_sw and T_diagenesis are from 37 to 52 °C and from 130 to 170 °C, respectively.     

The 1946 magnitude 6.1 earthquake in the Valais: site-effects as contributor to the damage

The January 25, 1946 earthquake in the central Valais region in southwest Switzerland was the strongest for the last 150 years. It reached an epicentral intensity Io of VIII in the area of Sierre. The Swiss Earthquake Catalogue (ECOS 2002) assigns a moment magnitude of Mw = 6.1 to the event. Assessment of recordings from European stations resulted in a moment magnitude of 5.8 (Bernardi et al. 2005). The earthquake caused moderate to high damage within a circle of about a 25 kilometer radius. Slight damage occurred up to a distance of 200 kilometers from the epicenter. The goal of this study was to reconstruct the damage field and consider its possible site-effects. We used an approach combining historical research with seismo-/geological investigation including a large number of experiments measuring the fundamental frequency of resonance and the shear-wave velocities of the sedimentary layers, using the characteristics of ambient vibration. This kind of research is relevant, since a huge alpine valley characterizes the Valais region, showing ground conditions that make site-effects likely for earthquakes. While we searched for damage in an unlimited area, our investigation of site-effects was limited to the Rhone valley and to Sion and Sierre in the central Valais region in particular.     

Algal blooms: a perspective from the coasts of India

Algal blooms have been documented along the west and east coasts of India. A review of bloom occurrences in Indian waters from 1908 to 2009 points out that a total of 101 cases have been reported. A comparison of the bloom cases reported before and after the 1950s reveals that there is an increase in the number of bloom occurrences. The reports of algal blooms indicate their predominance along the west coast of India especially the southern part. Majority of the blooms reported along the west coast of India are caused by dinoflagellates, whereas diatom blooms prevail along the east coast. There have been 39 causative species responsible for blooms, of which Noctiluca scintillans and Trichodesmium erythraeum are the most common. Reporting of massive fish mortality in Indian waters has been associated with the blooming of Cochlodinium polykrikoides, Karenia brevis, Karenia mikimotoi, N. scintillans, T. erythraeum, Trichodesmium thiebautii and Chattonella marina. Most of the blooms occurred during withdrawal of the south-west monsoon and pre-monsoon period. In Indian waters, this process is mainly influenced by seasonal upwelling and monsoonal forcing that causes high riverine discharge resulting in nutrient-enriched waters that provides a competitive edge for blooming of phytoplankton species.     

Influence of various factors on the difference in the liquid limit values determined by Casagrande’s and fall cone method

As there are many correlations linking the liquid limit directly or indirectly with various engineering properties of the soil, the accurate determination of the liquid limit is quite essential. Generally, two methods, i.e. Casagrande’s and fall cone are adopted to determine the liquid limit of soil. Research was carried out to study the influence of the properties of bentonite and the presence of the salt solution on the liquid limit values of soil-bentonite mixtures determined by the Casagrande’s and fall cone methods. The results showed that irrespective of the presence of the type of bentonite or salt solution, a higher value of the liquid limit was obtained by the Casagrande’s method as compared to the fall cone method. However, the difference between the two methods decreased with the decrease in the liquid limit, clay fraction, specific surface area and free swelling capacity of the bentonite present in the mixture. Similarly, the difference in the liquid limit values obtained by both these methods is reduced with an increase in the salt concentration.     

Preliminary investigations of 18O/16O and D/H compositions in rhyo-ignimbrites in the In Hihaou (In Zize) Magmatic Center,central Ahaggar,Algeria

The 620 M.y.-old in Hihaou (In Zize) magmatic complex located at the north-western boundary of the Archaean In Ouzzal block (western Ahaggar), is composed of massive alkaline rhyo-ignimbrites and rhyolitic domes, which are intruded by a granophyric and granitic body. The whole is preserved in a cauldron structure. Extrusive rocks are strongly ¹⁸O-depleted, with -values as low as –1.5/SMOW, while granophyres are less depleted (minimum -¹⁸O value=+2.0/SMOW. The granite has values around + 6/SMOW. D/H compositions are rather low, with D–90 to –110/SMOW. Isotopic zoning of quartz phenocrysts, ¹⁸O/¹⁶O fractionation among coexisting phases, and heterogeneity of the whole-rock -¹⁸O values, suggest that the volcanic rocks have interacted with meteoric water after the eruption. Several mechanisms of isotopic alteration are discussed. The hydrothermal alteration does not seem to have been controlled by the granitic intrusion, but rather seems to have followed the deposition of thick pyroclastic deposits on permeable arkosic sandstones and fluvio-glacial conglomerates. Pervasive circulation of water through the cooling volcanic deposits could have produced the observed ¹⁸O depletion.     

On-line fluorometry of multiple reactive and conservative tracers in streams

Performing tracer tests using artificial tracer compounds is a common practice to characterize natural streams regarding their (reactive) transport properties. Recently, the fluorescent compound resazurin was introduced as a reactive stream tracer to quantify hyporheic exchange and metabolic activity of streams. This tracer, together with its reaction product resorufin and a conservative tracer (in our case fluorescein), provides additional information about transport properties of the stream and its hyporheic zone and can therefore overcome restrictions that are commonly affiliated with the use of conservative tracers alone. However, all previously published studies using this tracer system were based on manual sampling of the water. This usually limits the number of measurements and thus the achievable temporal resolution, and potentially endangers data quality due to inadequate handling of samples. In this paper, a modified version of the GGUN-FL30 on-line fluorometer is presented in which the optics have been modified to allow measuring the concentrations of all three tracers simultaneously at intervals of 10 s. Experiments under controlled and natural conditions showed that the performance of the on-line fluorometer regarding tracer separation efficiency and practical detection limits is comparable to a high-performance laboratory spectrofluorometer. Furthermore, suggestions are given on how to correct tracer signal fluctuations caused by temporal changes in temperature and pH that might occur during a field tracer test.