Detection of DNA damage in mussels and sea urchins exposed to crude oil using comet assay

The single-cell microgel electrophoresis assay or the comet assay was used to evaluate DNA damage of dispersed crude oil on sea urchins (Strongylocentrotus droebachiensis) and mussels (Mytilus edulis L.). Sea urchins were exposed to 0.06 and 0.25 mg/L dispersed crude oil in a continuous flow system, while the mussels were exposed to 0.015, 0.06 and 0.25 mg/L dispersed crude oil. Sea urchin coelomocytes and mussel haemocytes were sampled after 4 and 5 weeks exposure, respectively. In the sea urchin coelomocytes, there was a significant concentration-related increase in the percentage of DNA in comet tail. In mussel haemocytes, there was a significantly higher percentage of DNA in comet tail for all treatments compared to the control. The responses were concentration-related up to 0.06 mg/L oil. The two highest exposure concentrations of mussels were not significantly different from each other. These results indicate that the comet assay can be used for biomonitoring of DNA damage in marine invertebrates following oil contamination.     

Co–rich Mn crusts from the Magellan Seamount cluster: the long journey through time

The Magellan seamounts began forming as large submarine shield volcanoes south of the equator during the Cretaceous. These volcanoes formed as a cluster on the small Pacific plate in a period when tectonic stress was absent. Thermal subsidence of the seafloor led to sinking of these volcanoes and the formation of guyots as the seamounts crossed the equatorial South Pacific (10–0°S) sequentially and ocean surface temperatures became too high for calcareous organisms to survive. Guyot formation was completed between about 59 and 45 Ma and the guyots became phosphatized at about 39–34 and 27–21 Ma. Ferromanganese crusts began formation as proto-crusts on the seamounts and guyots of the Magellan Seamount cluster towards the end of the Cretaceous up to 55 Ma after the formation of the seamounts themselves. The chemical composition of these crusts evolved over time in a series of steps in response to changes in global climate and ocean circulation. The great thickness of these crusts (up to 15–20 cm) reflects their very long period of growth. The high Co contents of the outer parts of the crusts are a consequence of the increasing deep circulation of the ocean and the resulting deepening of the oxygen minimum zone with time. Growth of the Co-rich Mn crusts in the Magellan Seamount cluster can be considered to be the culmination of a long journey through time.     

滇西地区地壳上地幔电性结构与地壳构造活动的关系

本文根据滇西地区18个大地电磁测深点资料的数据处理和分析结果,对测区深部导电率在纵、横向上的变化特征进行了研究。结果表明:滇西地区深部电性为多层结构,大致可分四至五个电性结构层;深部电性结构横向变化大,明显受区域构造控制;该区上部地壳内普遍存在低阻层;上地幔高导层明显存在两个隆起区,一个以剑川—鹤庆为中心呈北北西向展布的隆起区,另一个以腾冲—潞西为轴呈南北向展布的隆起区。 本文还讨论了地壳上地幔电性结构与大地构造的关系,滇西北裂陷区盆地的形成,以及该区地震活动与深部构造的关系     

早第三纪济阳湖盆的形成和演变

在构造和气候的综合作用下,本区在早第三纪成为一个大型裂谷湖盆,并在沙四、沙三和沙一期因受古太平洋海泛影响而具有"近海"湖盆的特征,其演变经历了初始形成-强烈扩张-晚期扩张-收缩干涸四个阶段,构成一个完整的湖侵-湖退旋回和湖泊早期形成-中期扩张-晚期收缩三个亚旋回。     

长江口深水航道治理工程实施后南北槽分汊段河床演变

利用1998-2006年的水深测图和南北槽分流、分沙比测量资料,研究了长江口深水航道治理工程实施后南、北槽分流比的变化过程、原因及其与分汊口河床冲淤演变的关系。结果表明,随着长江口深水航道治理工程的实施,北槽落潮分流比总体呈减小的趋势,南槽落潮分流比呈增加的趋势。伴随着南、北槽落潮分流比的南增、北减,南槽进口段(长约18 km)的主槽发生了冲刷,北槽进口段(长约12 km)的主槽发生了淤积,南、北槽进口段河槽总过水断面面积呈下降趋势。北槽落潮分流比与北槽河槽总容积、南北槽落潮分流比与各自进口段的河槽断面平均水深之间均具有较好的相关性,据此,预测了未来南、北槽的落潮分流比和进口段河槽冲淤的平衡量值。     

SAR图像点目标检测新方法

分析了2L-IHP目标检测算法,提出了一种基于幅度和相位信息的SAR图像目标检测方法,实现了SAR图像中人工目标的有效检测.     

Study on rain-runoff process in the peripheral mountainous area of the Sichuan Basin

Studies on rain-runoff process in the peripheral mountainous area of the Sichuan Basin, which is regarded as a key ecological shelter, will contribute to flood control and environmental protection for the Upper Yangtze River Basin. In two typical catchments--the Fujiang River Catchment and the Wujiang River Catchment, rainfall simulations have been conducted to study the rain-runoff processes of yellow soil and limestone soil in three types of land use--forestland, farmland and grassland. Results showed that （1） within the same rainfall process, overland flow occurs first on farmland, then on grassland, and finally on forestland; （2） soil surface coverage has a great impact on the occurrence and amount of overland flow. The runoff amount can increase 2-4 times after the coverage is removed; （3） the infiltration before the occurrence of overland flow will decrease because of higher gravel contents of soil, but it takes no effect on infiltration once overland flow becomes stable; （4） the runoff coefficient of the limestone soil forestland is greater than that of the yellow soil forest land, but less than that of the farmland; （5） three empirical infiltration models, including Horton＇ model, Kostiakov＇ model, and modified Kostiakov＇ model, were compared by using the observed results under rainfall simulation. The results showed that the Kostiakov＇ model performed better than both the Horton＇ model and modified Kostiakov model. According to the results of this research, the Kostiakov＇s model can be used to simulate rainfall infiltration when water erosion is modeled in the peripheral mountainous area of the Sichuan Basin.     

Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.     

Regional yield estimation for winter wheat with MODIS-NDVI data in Shandong, China

The significance of crop yield estimation is well known in agricultural management and policy development at regional and national levels. The primary objective of this study was to test the suitability of the method, depending on predicted crop production, to estimate crop yield with a MODIS-NDVI-based model on a regional scale. In this paper, MODIS-NDVI data, with a 250 m resolution, was used to estimate the winter wheat (Triticum aestivum L.) yield in one of the main winter-wheat-growing regions. Our study region is located in Jining, Shandong Province. In order to improve the quality of remote sensing data and the accuracy of yield prediction, especially to eliminate the cloud-contaminated data and abnormal data in the MODIS-NDVI series, the Savitzky–Golay filter was applied to smooth the 10-day NDVI data. The spatial accumulation of NDVI at the county level was used to test its relationship with winter wheat production in the study area. A linear regressive relationship between the spatial accumulation of NDVI and the production of winter wheat was established using a stepwise regression method. The average yield was derived from predicted production divided by the growing acreage of winter wheat on a county level. Finally, the results were validated by the ground survey data, and the errors were compared with the errors of agro-climate models. The results showed that the relative errors of the predicted yield using MODIS-NDVI are between −4.62% and 5.40% and that whole RMSE was 214.16 kg ha⁻¹ lower than the RMSE (233.35 kg ha⁻¹) of agro-climate models in this study region. A good predicted yield data of winter wheat could be got about 40 days ahead of harvest time, i.e. at the booting-heading stage of winter wheat. The method suggested in this paper was good for predicting regional winter wheat production and yield estimation.