New density measurements on carbonate liquids and the partial molar volume of the CaCO<Subscript>3</Subscript> component

Density measurements on nine liquids in the CaCO₃–Li₂CO₃–Na₂CO₃–K₂CO₃ quaternary system were performed at 1 bar between 555 and 969 °C using the double-bob Archimedean method. Our density data on the end-member alkali carbonate liquids are in excellent agreement with the NIST standards compiled by Janz (1992). The results were fitted to a volume equation that is linear in composition and temperature; this model recovers the measured volumes within experimental error (±0.18% on average, with a maximum residual of ±0.50%). Our results indicate that the density of the CaCO₃ component in natrocarbonate liquids is 2.502 (±0.014) g/cm³ at 800 °C and 1 bar, which is within the range of silicate melts; its coefficient of thermal expansion is 1.8 (±0.5)×10^–4 K^–1 at 800 °C. Although the volumes of carbonate liquids mix linearly with respect to carbonate components, they do not mix linearly with silicate liquids. Our data are used with those in the literature to estimate the value of in alkaline silicate magmas (20 cm³/mol at 1400 °C and 20 kbar), where CO₂ is dissolved as carbonate in close association with Ca. Our volume measurements are combined with sound speed data in the literature to derive the compressibility of the end-member liquids Li₂CO₃, Na₂CO₃, and K₂CO₃. These results are combined with calorimetric data to calculate the fusion curves for Li₂CO₃, Na₂CO₃, and K₂CO₃ to 5 kbar; the calculations are in excellent agreement with experimental determinations of the respective melting reactions.Editorial responsibility: I Carmichael     

Reconciling feminist theory and gendered resource management in Indonesia

Summary This paper considers the difficulties in reconciling a fluid and ambiguous conceptualization of gender difference with policy-based efforts to define women as 'target groups' in development interventions. The issue is explored with reference to gender issues in a transmigration resettlement area in Indonesia, where the instability of gender identities is particularly marked, and where gendered resource use and control are particularly blurred.     

Sea-level rise research and dialogue in North Carolina: Creating windows for policy change

Coastal areas are among the world's most vulnerable landscapes to impacts related to climate change, including inundation from sea-level rise (SLR), increased exposure to shoreline erosion, and greater frequency and intensity of storms. The status of research on the physical, ecological, and socio-economic effects of vulnerability to SLR and progress toward planning for its consequences varies from region to region worldwide. Here, we synthesize the results of three decades of SLR research and the development of coastal management policies in North Carolina, USA. We identify the major factors responsible for opening new policy ‘windows’ that address SLR, including how stakeholders have developed an increased understanding of the risks, the extent of public dialogue about potential response strategies, and advances in political receptivity to policy change. Research and policy progress in North Carolina continue to provide a model for other regions to help guide and evaluate the development of coastal policies.     

A new chronological framework for Middle and Upper Pleistocene landscape evolution in the Sussex/Hampshire Coastal Corridor, UK

The unique Middle and Late Pleistocene sedimentary record preserved along the Sussex/Hampshire Coastal Corridor between Romsey and Brighton contains a wealth of deposits including highstand marine sediments associated with a variety of different aged beaches, fluvial sediments associated with rivers crossing the coastal plain and cold stage deposits accumulating above the marine and fluvial sediments. Although quarrying activity has been extensive across much of the area it has been undertaken in flooded workings due to the high level of the watertable. Consequently little is known in detail about the sequences except where they outcrop on the foreshore around the coast. This paper examines recent work from the lower coastal plain using a multi-disciplinary approach these deposits to elucidate the age of the sequences and their associated environments of deposition.OSL dates from two of the beaches, the Aldingbourne and Brighton/Norton Beaches, place both within MIS 7. Although these OSL dates cannot differentiate between sub-stages within MIS 7, coupling these results with inferences from local geography, lithology and contained microfossils it is clear that the beaches belong to two different phases within MIS 7. These two beaches are clearly divided by a major phase of erosion and downcutting associated with a fall in sea-level. Fluvial sediments from Solent Terrace 2 and Arun Terrace 4 also date within MIS 7 and are tentatively ascribed to the downcutting event between the beaches. Together this information allows us to propose, for the first time, a robust independently dated framework for the lower parts of the coastal plain integrating for the first time the marine and terrestrial record.     

Changes to the drivers of fire weather with a warming climate – a case study of southeast Tasmania

Projected changes to the global climate system have great implications for the incidence of large infrequent fires in many regions. Here we examine the synoptic-scale and local-scale influences on the incidence of extreme fire weather days and consider projections of the large-scale mean climate to explore future fire weather projections. We focus on a case study region with periodic extreme fire dangers; southeast Tasmania, Australia. We compare the performance of a dynamically downscaled regional climate model with Global Climate Model outputs as a tool for examining the local-scale influences while accounting for high regional variability. Many of the worst fires in Tasmania and the southeast Australian region are associated with deep cold fronts and strong prefrontal winds. The downscaled simulations reproduce this synoptic type with greater fidelity than a typical global climate model. The incidence of systems in this category is projected to increase through the century under a high emission scenario, driven mainly by an increase in the temperature of air masses, with little change in the strength of the systems. The regional climate model projected increase in frequency is smaller than for the global climate models used as input, with a large model range and natural variability. We also demonstrate how a blocking Foehn effect and topographic channelling contributed to the extreme conditions during an extreme fire weather day in Tasmania in January 2013. Effects such as these are likely to contribute to high fire danger throughout the century. Regional climate models are useful tools that enable various meteorological drivers of fire danger to be considered in projections of future fire danger.     

Direct measurements of latent heat during crystallization and melting of a ugandite and an olivine basalt

Step-scanning calorimetric measurements using a Setaram HT1500 calorimeter were performed between 800 and 1400°C on two natural samples: a ugandite from the East African rift and an olivine basalt from the western Mexican arc. Our measurements provide the first in-situ quantitative assessment of enthalpy during melting of initially crystalline natural samples. The distribution of latent heat across the liquidus-solidus intervals of the two samples is distinctly different, reflecting significant variation in the sequence and abundance of mineral phases during melting (clinopyroxene and leucite in the ugandite; olivine, clinopyroxene, and plagioclase in the basalt). Our data further indicate that the common assumption of a uniform distribution of latent heat across the liquidus-solidus interval of a magma is a reasonable approximation for the olivine basalt, but is grossly in error for the ugandite. This is due to cotectic precipitation of leucite and clinopyroxene, leading to a large, disproportionate release of latent heat early in the crystallization sequence. The implication for the thermal history of a crystallizing ugandite magma is that therate of heat loss during conductive cooling will unitially be more rapid than the average rate. The net result will be to produce lower magmatic temperatures after a given cooling interval relative to models assuming a uniform release of latent heat. An additional series of scanning calorimetric experiments were performed at variable rates (1,2 and 3°/min) to evaluate the role of kinetics on the distribution of enthalpy during both melting and crystallization of the ugandite and olivine basalt. The results indicate that clinopyroxene is the most important mineral phase in controlling the shapes of the enthalpy profiles during cooling; this is due to its large enthalpy of fusion and its tendency for sluggish nucleation, followed by rapid crystallization at temperatures that vary with cooling rate. The resolution of the calorimeter (in terms of heat detected per unit time) is also important in determining the shapes of theobserved enthalpy profiles during these rapid scans. Estimates based on the observed calorimetric signal associated with melting of olivine, and the lack of a calorimetric signal during melting of leucite, combined with known enthalpies of fusion for the two phases, indicate detection limits of approximately 0.6–1.2 kJ per 5 min increments.     

Equatorial ozone profiles from the solar maximum mission—a comparison with theory

The u.v. spectrometer polarimeter on the Solar Maximum Mission has been utilized to measure mesospheric ozone vs altitude profiles by the technique of solar occultation. Sunset data are presented for 1980, during the fall equinoctal period within ± 20° of the geographic equator. Mean O₃, concentrations are 4.0 × 10¹⁰ cm^?3at 50 km, 1.6 × 10¹⁰ cm^?3 at 55 km. 5.5 × 10⁹ cm^?3 at 60 km and 1.5 × 10⁹ cm^?3 at 65 km. Som profiles exhibit altitude structure which is wavelike. The mean ozone profile is fit best with the results of a time-dependent model if the assumed water vapor mixing ratio employed varies from 6 ppm at 50 km to 2–4 ppm at 65 km.     

The ECOMAN project: A novel approach to defining sustainable ecosystem function

The ECOMAN was initiated in 2001 by the University of Plymouth, UK, Plymouth Marine Laboratory and the Department of the Environment, Fisheries and Rural Affairs (DEFRA) to address the need for more pragmatic assessment techniques linking environmental degradation with its causes. The primary aim of the project was to develop an evidence-based approach in which suites of easy-to-use, cost-effective and environmentally valid biological responses (biomarkers) could be used together to assess the health of coastal systems through the general condition of individuals. A range of sub-lethal endpoints, chosen to reflect successive levels of biological organisation (molecular, cellular, physiological), was evaluated in common coastal organisms showing different feeding types (filter feeding, grazing, predation) and habitat requirements (estuary, rocky shore). Initially, the suite of biomarkers was used in laboratory studies to determine the relative sensitivities of key species within different functional groups to common contaminants. These results were then validated in field studies performed in a range of ecosystems exhibiting different degrees/signatures of contamination. Here, an example is provided of a field study in the Humber Estuary, UK, which illustrates how multivariate statistical analysis can be used to identify patterns of response to discriminate between contaminated and clean sites. The use of a holistic, integrated approach of this kind is advocated as a practical means of assessing the impact of chemical contamination on organismal health and of ranking the status of marine ecosystems.