Occurrence and Distribution of Organic Contaminants in the Aquatic System in Berlin.Part II: Substituted Phenols in Berlin Surface Water

In a surface water screening, 30 representative surface water samples collected from rivers, canals, and lakes in Berlin were investigated for the presence of 22 substituted phenols. The phenols selected include the 11 phenols considered as “priority pollutants” by the US Environmental Protection Agency (US-EPA). Surface water samples were extracted applying solid-phase extraction with styrenedivinylbenzene adsorbent. The recoveries, determined in spiking experiments, were between 80 % and 103 %. After derivatization with N-(tert-butyldimethylsilyl)-N-methyl-trifluoroacetamide (MTBSTFA) the samples were analyzed by capillary gas chromatography-mass spectrometry (GC-MS). Phenol, cresols, 2-ethylphenol, 2-chlorophenol, 4-chloro-3-methylphenol, pentachlorophenol, 2-nitrophenol, and 4-nitrophenol were detected in the surface water samples at concentrations between 0.02 μg/L and 7.8 μg/L, respectively. The distribution of these residues in the Berlin surface waters showed that the phenolic residues, with the exception of pentachlorophenol and 2-ethylphenol, do not originate primarily from municipal sewage treatment plants discharges. Some of the phenols are formed naturally or occur as ubiquitous anthropogenic contaminants in the aquatic system.     

Diffusive equilibrium in thin films provides evidence of suppression of hyporheic exchange and large‐scale nitrate transformation in a groundwater‐fed river

The hyporheic zone of riverbed sediments has the potential to attenuate nitrate from upwelling, polluted groundwater. However, the coarse‐scale (5–10 cm) measurement of nitrogen biogeochemistry in the hyporheic zone can often mask fine‐scale (<1 cm) biogeochemical patterns, especially in near‐surface sediments, leading to incomplete or inaccurate representation of the capacity of the hyporheic zone to transform upwelling NO₃^?. In this study, we utilised diffusive equilibrium in thin‐films samplers to capture high resolution (cm‐scale) vertical concentration profiles of NO₃^?, SO₄^2?, Fe and Mn in the upper 15 cm of armoured and permeable riverbed sediments. The goal was to test whether nitrate attenuation was occurring in a sub‐reach characterised by strong vertical (upwelling) water fluxes. The vertical concentration profiles obtained from diffusive equilibrium in thin‐films samplers indicate considerable cm‐scale variability in NO₃^? (4.4 ± 2.9 mg N/L), SO₄^2? (9.9 ± 3.1 mg/l) and dissolved Fe (1.6 ± 2.1 mg/l) and Mn (0.2 ± 0.2 mg/l). However, the overall trend suggests the absence of substantial net chemical transformations and surface‐subsurface water mixing in the shallow sediments of our sub‐reach under baseflow conditions. The significance of this is that upwelling NO₃^?‐rich groundwater does not appear to be attenuated in the riverbed sediments at <15 cm depth as might occur where hyporheic exchange flows deliver organic matter to the sediments for metabolic processes. It would appear that the chemical patterns observed in the shallow sediments of our sub‐reach are not controlled exclusively by redox processes and/or hyporheic exchange flows. Deeper‐seated groundwater fluxes and hydro‐stratigraphy may be additional important drivers of chemical patterns in the shallow sediments of our study sub‐reach. © 2015 The Authors. Hydrological Processes Published by John Wiley & Sons Ltd.     

Thermodynamic controls on element partitioning between titanomagnetite and andesitic–dacitic silicate melts

Titanomagnetite–melt partitioning of Mg, Mn, Al, Ti, Sc, V, Co, Ni, Cu, Zn, Ga, Zr, Nb, Mo, Hf and Ta was investigated experimentally as a function of oxygen fugacity (fO₂) and temperature (T) in an andesitic–dacitic bulk-chemical compositional range. In these bulk systems, at constant T, there are strong increases in the titanomagnetite–melt partitioning of the divalent cations (Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺) and Cu²⁺/Cu⁺ with increasing fO₂ between 0.2 and 3.7 log units above the fayalite–magnetite–quartz buffer. This is attributed to a coupling between magnetite crystallisation and melt composition. Although melt structure has been invoked to explain the patterns of mineral–melt partitioning of divalent cations, a more rigorous justification of magnetite–melt partitioning can be derived from thermodynamic principles, which accounts for much of the supposed influence ascribed to melt structure. The presence of magnetite-rich spinel in equilibrium with melt over a range of fO₂ implies a reciprocal relationship between a(Fe²⁺O) and a(Fe³⁺O_1.5) in the melt. We show that this relationship accounts for the observed dependence of titanomagnetite–melt partitioning of divalent cations with fO₂ in magnetite-rich spinel. As a result of this, titanomagnetite–melt partitioning of divalent cations is indirectly sensitive to changes in fO₂ in silicic, but less so in mafic bulk systems.     

Fractional Crystallization and Liquid Immiscibility Processes in the Alkaline-Carbonatite Complex of Juqui (So Paulo, Brazil)

The Juqui circular intrusion, which is Cretaceous in age (130–135Ma), crops out in the Precambrian gneissic basement in Brazilover an area of 14 km2. It consists of olivine clinopyroxen-itecumulates (with minor olivine gabbros) in the northeastern sector(74 vol.%), whereas ijolites-melteigites-urtites (4%) and nephelinesyenites with minor essexites and syenodiorites (21%) outlinesubannular concentric patterns with an Mg-carbonatite core (1%), in the southwestern part of the complex. Petrographical, bulk rock, and mineral compositional trendsindicate that the origin of the complex can be largely accountedfor by shallow-level fractional crystallization of a carbonatedbasanitic parental magma. Such a magma was generated deep inthe subcontinental lithosphere by low-degree partial meltingof a garnet-phlogopite peridotite source. Mass-balance calculations in agreement with field volume estimatespermit definition of several fractionation stages of the magmaticevolution under nearly closed-system conditions, with inwarddevelopment of zonally arranged side-wall cumulates. These stagesinvolved: (1) fractionation from basanite to essexite magma(liquid fraction F = 33–5%) by crystallization of olivineclinopyroxenite plus minor olivine alkali gabbro cumulates;(2) derivation of the least differentiated mafic nepheline syenite(F = 5–5 %) from essexitic magma by subtraction of a syenodioriteassemblage; (3) exsolution of a carbonatite liquid (5%) froma CO₂-enriched mafic nepheline syenite magma, which also underwentcontinuous fractionation giving rise to ijolite-melteigite-urtitecumulates. The proportion of cumulus clinopyroxene and biotiteand intercumulus nepheline and alkali feldspar in these lastrocks, as well as the absence of alkalis in carbonatite, maybe attributed, at least in part, to loss of alkali-rich hydrousfluids released during and after the unmixing formation of thetwo conjugate liquids. The KD values determined for Mg-carbonatite/nepheline syeniteare lower (1–4–2–9) for light rare earth elements(LREE) than for REE from Eu to Yb (4–6–7–8),in contrast to recent experimental results (Hamilton et al.,1989). A possible explanation is that Juquia Mg-carbonatiterepresents an alreadydifferentiated magma, which underwent extensivefractionation of LREE-enriched calcite. In this way, the highvariability of K₀ REE patterns observed in several alkaline-carbonatitecomplexes can also be accounted for. The remarkably constant initial ⁸⁷Sr/⁸⁶Sr ratios (mostly between0–7052 and 0–7057) support the interpretation ofthe intrusion as having been generated by fractrional crystallizationand liquid immiscibility from a common parental magma. Iligherisotopic ratios (0–7060–0–7078), found mainlyin dykes and in the border facies of the intrusion, may be dueto contamination by the gecissic basement.     

Application of time- and magnitude-predictable model for long-term earthquake prediction in Iran

The regional time- and magnitude-predictable model has been applied successfully in diverse regions of the world to describe the occurrence of main shocks. In the current study, the model has been calibrated against the historical and instrumental catalog of Iranian earthquakes. The Iranian plateau is divided into 15 seismogenic provinces; then, the interevent times for strong main shocks have been determined for each one. The empirical relations reported by Papazachos et al. (Tectonophysics 271:295–323, 1997a) for the Alpine–Himalayan belt (including Iran) were adopted except for the constant terms that were calculated separately for every seismotectonic area. By using the calibrated equations developed for the study area and taking into account the occurrence time and magnitude of the last main shocks in each seismogenic source, the time-dependent conditional probabilities of occurrence P(?t) of the next main shocks during next 10, 20, 30, 40 and 50 years as well as the magnitude of the expected main shocks (M _f) have been estimated. The immediate probability (within next 10 years) of a large main shock is estimated to be high and moderate (>35 %) in all regions except zones 9 (M _f = 5.8) and 15 (M _f = 6.1). However, it should be noted that the probabilities have been estimated for different M _f values in 15 regions. Comparing the model predictions with the actual earthquake occurrence rates shows the good performance of the model for Iranian plateau.     

Trace Metals in Selected Benthic Invertebrates from Belgian Coastal Waters (1981–1996)

Mercury, cadmium, lead, copper, zinc and chromium were assessed in brown shrimp (Crangon crangon), swimming crab (Liocarcinus holsatus), hermit crab (Pagurus bernhardus), starfish (Asterias rubens) and cut trough shell (Spisula subtruncata) from ten sampling stations off the Belgian coast, including three dredge spoils disposal sites. Calculations of time trends indicated that on the whole concentrations of trace metals had significantly decreased since 1981, also on dredged material dumping sites. Starfish and hermit crab were found to be the most promising benthic indicator species for metal contamination. Globally, the location of the sites, including the dredge spoils disposal zones, showed to be of little influence on the concentrations of trace metals.     

A novel mathematical morphology based algorithm for shoreline extraction from satellite images

Abstract

Shoreline extraction is fundamental and inevitable for several studies. Ascertaining the precise spatial location of the shoreline is crucial. Recently, the need for using remote sensing data to accomplish the complex task of automatic extraction of features, such as shoreline, has considerably increased. Automated feature extraction can drastically minimize the time and cost of data acquisition and database updating. Effective and fast approaches are essential to monitor coastline retreat and update shoreline maps. Here, we present a flexible mathematical morphology-driven approach for shoreline extraction algorithm from satellite imageries. The salient features of this work are the preservation of actual size and shape of the shorelines, run-time structuring element definition, semi-automation, faster processing, and single band adaptability. The proposed approach is tested with various sensor-driven images with low to high resolutions. Accuracy of the developed methodology has been assessed with manually prepared ground truths of the study area and compared with an existing shoreline classification approach. The proposed approach is found successful in shoreline extraction from the wide variety of satellite images based on the results drawn from visual and quantitative assessments.     

Nocturnal urban heat island in Lisbon (Portugal): main features and modelling attempts

Summary In recent years, several studies have examined the Lisbon urban climate. A central conclusion is the existence of a nocturnal urban heat island (mean ΔT_u−r = 2.5 °C). The aim of this paper is to summarise several attempts carried out in the last decade to interpolate nocturnal air temperatures across Lisbon, in order to be able to draw thermal maps as accurately as possible. This study refers only to clear nights. Stepwise multiple regression and a Geographic Information System were used to model the relation between air temperature and parameters related to land-use and topography. The different regression models (coefficients of determination between 0.68 and 0.92) show that canopy layer air temperature depends on sky-view factor, building height and percentage of built-up area, but also to a great extend on mesoclimatic geographic factors such as altitude, topography and distance from the Tagus River. Examples of four frequently encountered nocturnal air temperature patterns are presented, each corresponds to a different weather type. This method employed could prove useful in drawing climatic maps that may be of use in master plans of urban municipalities.     

A comparison of methods to assess long-term changes in Sonoran Desert vegetation

Knowledge about the condition of vegetation cover and composition is critical for assessing the structure and function of ecosystems. To effectively quantify the impacts of a rapidly changing environment, methods to track long-term trends of vegetation must be precise, repeatable, and time- and cost-efficient. Measuring vegetation cover and composition in arid and semiarid regions is especially challenging because vegetation is typically sparse, discontinuous, and individual plants are widely spaced. To meet the goal of long-term vegetation monitoring in the Sonoran Desert and other arid and semiarid regions, we determined how estimates of plant species, total vegetation, and soil cover obtained using a widely-implemented monitoring protocol compared to a more time- and resource-intensive plant census. We also assessed how well this protocol tracked changes in cover through 82 years compared to the plant census. Results from the monitoring protocol were comparable to those from the plant census, despite low and variable plant species cover. Importantly, this monitoring protocol could be used as a rapid, “off-the shelf” tool for assessing land degradation (or desertification) in arid and semiarid ecosystems.     

Investigation of ammonia removal from polluted waters by Clinoptilolite zeolite

Ammonia nitrogen compounds in the wastewaters and effluents have harmful effects on water resources. Ion exchange with zeolites is a separation process for ammonia removal from effluents. The objective of this research was to study the efficiency of an ammonia removal and the factor affecting to this process. The Clinoptilolite was obtained from Semnan mines at the north part of Iran. The samples were grounded and sieved based on the U.S. standard mesh number 20, 30, 40 and conditioned by ammonia sulfate and sodium chloride solutions. The characteristics of samples for ammonia removal and the selectivity sequence for adsorbing interfering cations were then determined. Results shown that the average ion exchange capacity of zeolite in batch and continuous systems were 6.65–16 and 16.31–19.5 mg NH₄ ⁺ /g zeolite weight, respectively. In study on the zeolite for selective cations showed the ranking of K⁺, NH₄ ⁺, Na⁺, Ca²⁺ and Mg²⁺ respectively. Results indicated that high level of regeneration (95–98%) might be achieved with NaCl solution. Based on the results, Clinoptilolite may be effective applied in wastewater treatment, both from technical and economical aspects.