Temporal variation of soil radon and thoron concentrations in Mizoram (India), associated with earthquakes

Continuous soil-gas radon and thoron measurements were carried out at 15 days interval along Mat fault in Mizoram (India), which lies in the seismic zone V of the seismic zonation map of India. The study was carried out from March 2012 to February 2013 using LR-115 Type II detectors, manufactured by Kodak Pathe, France. The effect of meteorological parameters on radon and thoron data was taken into consideration. The annual average value of radon and thoron concentration was found to be 621.21 and 590.18 Bq/m³ with a standard deviation of 377.60 and 301.34 Bq/m³, respectively. Inverse correlation coefficient was obtained between radon/thoron concentration and the meteorological parameters except in one case (thoron and relative humidity) which showed a weak positive correlation. Standard deviation method was employed in order to differentiate those anomalies which are solely caused by seismic events and not by meteorological parameters. The data obtained have been correlated with the seismic activities that occurred around the measuring site. Positive correlations were found between radon/thoron data and the earthquakes.     

Impact of the 2004 Indian Ocean tsunami along the Tamil Nadu coastline: field survey review and numerical simulations

The 2004 Indian Ocean tsunami had a significant impact on the Tamil Nadu coast in India. In this paper, a range of field survey data collected by different survey teams available in literature have been analyzed and compiled to serve as a basis for validation of numerical tsunami simulations. The individual field surveys reveal a significant scatter in the run-up data between the different teams, which point out that the uncertainty in these data must be taken into account when using them for validation. The inundation of the 2004 Indian Ocean tsunami is simulated for the coastlines of Chennai and Nagapattinam based on high-resolution topography. Different spatially uniform Manning friction as well as heterogeneous friction maps is used. Overall, the simulation results showed a good agreement with the field observations, but there are also some observed spatial variability in the goodness of the fit between the data and simulations. In some areas, clear discrepancies are found. The results obtained using detailed land use maps including spatially variable friction are not significantly more accurate than those employing spatially constant values. For most areas, parameters indicating relatively low friction provided best match with the observations. This may also suggest that the inundation is often strongly governed by local variations in topography.     

Cyclic Thermo-Mechanical Analysis of Wellbore in Underground Compressed Air Energy Storage Cavern

The compressed air energy storage (CAES) method is a viable method of storing surplus energy underground when there is a mismatch between energy generation and demand. Wellbores embedded in rock are an integral part of energy storage structures, and are used for injecting and extracting the compressed air. During injection and production cycles, the storage reservoir and wellbore are subjected to cyclic change in external pressure and temperature, which may cause failure of the wellbore. In this paper, cyclic thermo-mechanical analysis of a horizontal wellbore in an underground CAES cavern is performed using finite element analysis. The rock behavior is simulated using the Mohr-Coulomb constitutive law. The reduction in the yield strength of rock with increase in the number of loading cycles is taken into account in the analysis. Parametric sensitivity studies are carried out to study the effects of dilation and friction angles of rock, the ratio of in situ horizontal and vertical stresses, loading frequency, and the magnitude of the temperature cycles in the cavern on the wellbore performance for different types of rock. The thermo-mechanical cyclic behavior leads to plastic strains that are greater than those obtained by performing mechanical analysis only. Significantly large deformation is generated in rock for large dilation angle and high loading frequencies.     

A Review of Coastal Fog Microphysics During C-FOG

Boundary-Layer Meteorology - Our goal is to provide an overview of the microphysical measurements made during the C-FOG (Toward Improving Coastal Fog Prediction) field project. In addition, we...     

Spatial and temporal variability in maximum,minimum and mean air temperatures at Madhya Pradesh in central India

In the present study, an investigation has been made to study the spatial and temporal variability in the maximum, the minimum and the mean air temperatures at Madhya Pradesh (MP), in central India on monthly, annual and seasonal time scale from 1901 to 2002. Further, impact of urbanization and cloud cover on air temperature has been studied. The annual mean, maximum and minimum temperatures are increased by 0.60, 0.60 and 0.62 °C over the past 102 years, respectively. Seasonally, the warming is more pronounced during winter than summer. The temperature decreased during the less urbanized period (from 1901 to 1951) and increased during the more urbanized period (1961 to 2001). It is also found that the minimum temperature increased at higher rate (0.42 °C) followed by the mean (0.36 °C) and the maximum (0.32 °C) temperature during the more urbanized period. Furthermore, cloud cover is significantly negatively related with air temperature in monsoon season and as a whole of the year.     

Arsenic mobilization in alluvial soils of Punjab, North–West India under flood irrigation practices

A laboratory investigation was carried out to examine the mechanism of arsenic (As) mobilization under flooded conditions (24 and 240 h) in 18 alluvial soils of Punjab, North–West India. Total dissolved As increased from a range of 3–16 μg L^?1 (mean 9 μg L^?1) to a range of 33–1,761 μg L^?1 (mean 392 μg L^?1) with the increase in flooding period from 24 to 240 h. The amount of As mobilization varied depending upon redox potential (pe) created by flooding conditions. After 24 h of flooded conditions, pe of soil water suspension ranged from ?1.75 to 0.77 (mean ?0.24). Increasing the flooding period to 240 h, pe of soil water suspension decreased in the range of ?4.49 to ?2.74 (mean ?3.29). Pourbaix diagram identified arsenate (HAsO₄ ^2?) as predominant species in most of the alluvial soil–water suspensions under oxidized conditions, after 24 h of equilibration period, which ultimately transformed to arsenite (H₃AsO₃ ⁰) after 240 h of anaerobic condition due to more reduced status. The solid phase identified was orpiment (As₂S₃). Identification of iron and manganese species in alluvial soil water suspension by Pourbaix diagram indicated decline in both soluble Fe²⁺ and SO₄ ^2? concentration due to the formation of iron sulfide mineral phase after 240 h under anaerobic conditions. In these soils, decline in soluble Fe was also due to the precipitation of vivianite [Fe₃(PO₄)₂·8H₂O]. Elevated arsenic content and low pe value were measured in aquifers located in paddy growing fields comparative to aquifers of other sites. Large degree of variability in As concentrations was recorded in aquifers located at same sites. Thus, it is better to analyze each aquifer for their As content rather than to depends on the prediction on As content of neighbouring wells. The present investigation elucidates that flood irrigation practices in Punjab for growing paddy crop could induce the geochemical conditions favorable to mobilize arsenic from surface soils which could eventually elevate its content in the underlying shallow aquifers. Water abstracted from these aquifers by hand pumps or tube wells for drinking purposes could create hazards for local population due to loading with arsenic concentration above the safe limits. Thus, to avoid further contamination of shallow aquifers with arsenic, it is advisable to shift the flooded rice cultivation to other upland crops having lesser water requirement.     

Prediction of water quality from simple field parameters

Water quality parameters like temperature, pH, total dissolved solids (TDS), total suspended solids (TSS), dissolved oxygen (DO), oil and grease, etc., are calculated from the field while parameters like biological oxygen demand (BOD) and chemical oxygen demand (COD) are interpreted through the laboratory tests. On one hand parameters like temperature, pH, DO, etc., can be accurately measured with the exceeding simplicity, whereas on the other hand calculation of BOD and COD is not only cumbersome but also inaccurate many times. A number of previous researchers have tried to use different empirical methods to predict BOD and COD but these empirical methods have their limitations due to their less versatile application. In this paper, an attempt has been made to calculate BOD and COD from simple field parameters like temperature, pH, DO, TSS, etc., using Artificial Neural Network (ANN) method. Datasets have been obtained from analysis of mine water discharge of one of the mines in Jharia coalfield, Jharkhand, India. 73 data sets were used to establish ANN architecture out of which 58 datasets were used to train the network while 15 datasets for testing the network. The results show encouraging similarity between experimental and predicted values. The RMSE values obtained for the BOD and COD are 0.114 and 0.983 %, respectively.     

Chemometric analysis to infer hydro-geochemical processes in a semi-arid region of India

Groundwater exploitation in Punjab has increased in last few decades due to rapid increase in industrialization, population, crop production, and erratic monsoon. In the present study, groundwater samples from 29 locations were collected and analyzed for almost all major anions, cations, and heavy metals. The analyzed parameters formed the attribute database for statistical analysis. The study approach included multivariate statistical analysis of hydro-chemical data to identify hydro-geochemical processes occurring in the study area and its relation to groundwater quality. The principal component analysis produced seven significant factors that explained nearly 77 % of the cumulative variance. Factor 1 explained nearly 22.05 % of dataset with variables loading indicating mineralization of geological component of soil. Trilinear plot and other graphical methods were also used to identify chemical facies of groundwater and geochemical processes occurring in study area. The water type in the study area is of Na/K–Mg–HCO₃ type. It was found that the general hydro-geochemistry of groundwater in the study area dominated is by the processes such as carbonate/silicate weathering, ion-exchange, and dissolution. Thus, statistical methods can prove to be an effective tool understanding hydro-geochemistry of a region along with conventional graphical methods.     

Fitting a simplified two-parameter gamma distribution function for synthetic sediment graph derivation from ungauged catchments

A simple procedure is proposed and demonstrated to generate synthetic sediment graphs (SSG) for ungauged catchments. The proposed procedure makes use of widely used two-parameter gamma distribution function in a simplified manner. The shape and scale parameters of the distribution are derived using simple analytical procedures given by Bhunya et al. (J Hydrol Eng 8(4):226–230, 2003) for situations where partial data is usually available as in the case with sedimentation studies. The direct sediment graphs are computed by convolution of unit sediment graph with the mobilized sediment. The suitability of the proposed procedure is tested using the temporally observed sediment graph data of seven small watersheds of Piedmont Province of the Potomac River Basin, Washington D.C., USA. The results obtained are compared with the rigorous synthetic procedure of Chen and Kuo (J Hydrol 84:35–54, 1986). The goodness-of-fit in terms of absolute relative error in peak sediment outflow rate and time-to-peak sediment outflow rate between observed and computed sediment graphs by proposed as well as Chen and Kuo method shows that the proposed procedure produces results well comparable and even better than those obtained using Chen and Kuo procedure and therefore can be successfully used for development of SSG for ungauged catchments. It is worth noting here that the proposed procedure is very simple in application as compared to the rigorous procedure of Chen and Kuo and eliminates the restriction on storm duration and incorporates the routing concept which plays an important role in sedimentation. Moreover, since the proposed procedure makes use of probability distribution function, several other suitable distributions can also be explored for derivation of synthetic sediment graphs from ungauged catchments.     

Hawking radiation of Kerr-Newman black hole in different tortoise coordinate transformations

Hawking radiation effect of Maxwell’s electromagnetic fields in the Kerr-Newman black hole space-time is investigated using two different tortoise coordinate transformations. It has been shown that the new tortoise coordinate transformation produces constant term ξ in the expression of surface gravity and Hawking temperature. If ξ is set to zero, the surface gravity and Hawking temperature will be equal to those obtained from the old tortoise coordinate transformation. This indicates that new transformation is more reliable and accurate. The black body radiant spectrum of photon displays a new spin-rotation coupling effect.