An open source GIS‐based Planning Support System: Application to the land use plan of La Troncal,Ecuador

Planning Support Systems (PSS) comprise a wide variety of geo‐technological tools related to GIS and spatial modeling aimed at addressing land planning processes. This article describes the OpenRules system, a PSS based on a previous system called RULES. Among OpenRules new features are its architecture, based exclusively on free and open source software, and its applicability to all land use types, including rural and urban uses. In addition, OpenRules incorporates an unlimited number of land evaluation factors and a new objective in land use spatial allocation. OpenRules has been programmed in Java and implemented as a module of the free GIS software gvSIG, with full integration between the GIS and the decision support tools. Decision support tools include multicriteria evaluation, multiobjective linear programming and heuristic techniques, which support three basic stages of land use planning processes, namely land suitability evaluation, land use area optimization and land use spatial allocation. The application of OpenRules to the region of La Troncal, Ecuador, demonstrates its capability to generate alternative and coherent solutions through a scientific and justified procedure at low cost in terms of time and resources.     

Intra-plant differences in seaweed nutritional quality and chemical defenses: Importance for the feeding behavior of the intertidal amphipod Orchestoidea tuberculata

As a result of their morphological complexity, large macroalgae show intra-thallus variations in their nutritional composition and secondary metabolite content, which influences the trophic ecology of herbivorous invertebrates, and ultimately their fitness. In this study, we evaluated for the first time the variability in nutritional quality (protein content, carbohydrates, lipids, and total organic matter), secondary metabolites (phlorotannins), and structure (shape and toughness) between blades and stipes of the macroalgae Durvillaea Antarctica. Specifically, we looked at their effect on feeding preference, rate of consumption, absorption efficiency, and growth rate of the amphipod Orchestoidea tuberculata, one of the most abundant organisms on Chilean sandy beaches. Proteins, carbohydrates, total organic matter and phlorotannin contents were significantly higher in blades than in stipes. Preference experiments revealed that the amphipods preferred blades when fresh pieces of blades and stipes were offered at the same time. Similar results were found when artificial food (in which structures of both parts of the alga were standardized) was offered, suggesting that shape and toughness of the two different parts of the alga did not influence preference patterns of O. tuberculata. Absorption efficiency of O. tuberculata was higher on blades compared to stipes. When the amphipods were kept with each of the algal parts separately (i.e. no choice), they consumed a significantly higher amount of stipe, which suggests that O. tuberculata used food quantity to compensate for the lower nutritional quality of stipes. The higher nutritional values of blades compared to stipes appears to explain observed preference patterns by O. tuberculata. Phlorotannin content did not appear to inhibit blade consumption, suggesting that the nutritional quality of the food could be more important than chemical defense in determining food choice in O. tuberculata. Growth did not differ between the amphipods maintained with either blades or stipes (i.e. no choice), which is consistent with the hypothesis of compensatory feeding. To conclude, O. tuberculata can actively select specific parts of an alga and this selection appears to be based on nutritional quality. The capacity for using different feeding strategies allow O. tuberculata, in some cases, to successfully exploit food types with different nutritional qualities.     

A procedure for modelling asymptotic g‐mode pulsators: The case of γ Doradus stars

Mode identification is one of the first and main problems we encounter in trying to develop the complete potential of asteroseismology. In the particular case of g‐mode pulsators, this is still an unsolved problem, from both the observational and theoretical points of view. Nevertheless, in recent years, some observational and theoretical efforts have been made to find a solution. In this work we use the latest theoretical and computational tools to understand asymptotic g‐mode pulsators: 1) the Frequency Ratio Method, and 2) Time Dependent Convection. With these tools, a self‐consistent procedure for mode identification and modelling of these g‐mode pulsators can be constructed. This procedure is illustrated using observational information available for the γ Doradus star 9Aurigae. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hydrogeology and sustainable future groundwater abstraction from the Agua Verde aquifer in the Atacama Desert,northern Chile

The hyper-arid conditions prevailing in Agua Verde aquifer in northern Chile make this system the most important water source for nearby towns and mining industries. Due to the growing demand for water in this region, recharge is investigated along with the impact of intense pumping activity in this aquifer. A conceptual model of the hydrogeological system is developed and implemented into a two-dimensional groundwater-flow numerical model. To assess the impact of climate change and groundwater extraction, several scenarios are simulated considering variations in both aquifer recharge and withdrawals. The estimated average groundwater lateral recharge from Precordillera (pre-mountain range) is about 4,482 m³/day. The scenarios that consider an increase of water withdrawal show a non-sustainable groundwater consumption leading to an over-exploitation of the resource, because the outflows surpasses inflows, causing storage depletion. The greater the depletion, the larger the impact of recharge reduction caused by the considered future climate change. This result indicates that the combined effects of such factors may have a severe impact on groundwater availability as found in other groundwater-dependent regions located in arid environments. Furthermore, the scenarios that consider a reduction of the extraction flow rate show that it may be possible to partially alleviate the damage already caused to the aquifer by the continuous extractions since 1974, and it can partially counteract climate change impacts on future groundwater availability caused by a decrease in precipitation (and so in recharge), if the desalination plant in Taltal increases its capacity.     

A methodology for locating the original quarries used for constructing historical buildings: application to Málaga Cathedral, Spain

It is often necessary to locate the original quarry which supplied the stone for a particular historical building. This stones could be used for future restoration work and for testing in the laboratory (artificial aging tests, physical properties determination, control of the efficacy of conservation treatments, etc.). Generally, reviewing historical documentation gives information about the geographical setting of quarries and location of the stones in the monument, but this information needs to be proved by field and laboratory studies. The comparative study of stone from quarries and monuments should basically include the following: (1) mineralogical and petrographical studies; (2) the chemical analysis of major, minor and trace elements; (3)stable isotopes determinations; (4) physical properties of quarry materials and unweathered building stone (water absorption, ultrasound transmission velocity, porosity and porous system, density, bulk density, compressive strength, etc.). This methodology was applied to Málaga Cathedral stones represented in the main façade, towers, and the western zone of the terrace, which, according to historical literature, came from Almayate (Miocene–Pliocene limestones) and Cerro Coronado (Permotriassic sandstone) in Málaga. The conclusion of the comparative study carried out on quarries and building stones was consistent with the information available from the historical documentation.     

Indicator Simulation Accounting for Multiple-Point Statistics

Geostatistical simulation aims at reproducing the variability of the real underlying phenomena. When nonlinear features or large-range connectivity is present, the traditional variogram-based simulation approaches do not provide good reproduction of those features. Connectivity of high and low values is often critical for grades in a mineral deposit. Multiple-point statistics can help to characterize these features. The use of multiple-point statistics in geostatistical simulation was proposed more than 10 years ago, on the basis of the use of training images to extract the statistics. This paper proposes the use of multiple-point statistics extracted from actual data. A method is developed to simulate continuous variables. The indicator kriging probabilities used in sequential indicator simulation are modified by probabilities extracted from multiple-point configurations. The correction is done under the assumption of conditional independence. The practical implementation of the method is illustrated with data from a porphyry copper mine.     

A reconstruction of the palaeohydrological conditions of a flood‐plain: a multi‐proxy study from the Grabia River valley mire,central Poland

This study investigated the Grabia River valley mire in central Poland to reconstruct its palaeoenvironmental conditions from the Younger Dryas to the present. We analysed sedimentological, biological and geochemical data from the palaeo‐oxbow lake and valley mire to identify the principal hydrological trends, especially episodes of high water level. During the Lateglacial and Holocene, the Grabia River had a meandering channel, and its hydraulic parameters and the channel dimensions changed in response to climatic oscillations and vegetation development. We identified phases of high flood intensity and high groundwater level that correlate with regional and supraregional climatic events. The frequency and timing of palaeohydroclimatic oscillations show strong similarities to records from other sites in Poland and the rest of Europe. We show that various analytical methods, namely, pollen, plant macrofossils, Cladocera, Chironomidae, sedimentological, geochemical and radiocarbon data, can be effective tools for reconstructing past hydroclimatic changes in palaeo‐oxbow lakes and investigating the effects of past climate changes on river environments. The high sensitivity of the biota, especially Cladocera, to changes in water level permits the reconstruction of palaeoecological changes, especially flood episodes that occurred in the river valley. In particular, the increase in the proportion of sediment‐associated Cladocera and pelagic taxa was closely correlated with floods. Through comparisons with the palaeobiological data, geochemical data allowed the identification of humid phases within the fen associated with a rising groundwater table, direct fluvial activity (floods) and alluvial deposition. We also discuss the limitations of palaeohydrological reconstructions based on these proxies, especially on fossil aquatic invertebrates.     

Geochemical constraints on the origin of the late Jurassic proto-Caribbean oceanic crust in Hispaniola

The nature of the oceanic crust produced through rifting and oceanic spreading between North and South America during the Late Jurassic is a key element for the Caribbean plate tectonic model reconstruction. Located in the Cordillera Central of Hispaniola, the Loma La Monja volcano-plutonic assemblage (LMA) is composed of gabbros, dolerites, basalts, and oceanic sediments, as well as metamorphic equivalents, which represent a dismembered fragment of this proto-Caribbean oceanic crust. Petrologic and geochemical data show that the LMA have a relatively broad diversity in composition, which represent the crystallization products of a typical low-pressure tholeiitic fractionation of mid-ocean ridge basalts (MORB)-type parental magmas, ranging from N- to E-MORB. Three geochemical groups have been distinguished in the volcanic sequence: LREE-flat to slightly LREE-enriched basalts of groups II and III occur interlayered in the lower stratigraphic levels; and LREE-depleted basalts of group I in the upper levels. Mantle melt modeling suggests that group III magmas are consistent by mixing within a mantle melt column of low-degree (<1%) melts of a deep garnet lherzolite source and high-degree (>15%) melts of a shallow spinel source, and groups II and I magmas are explained with moderate to high (14–18%) and very high (>20%) fractional melting degrees of a shallower spinel mantle source, respectively. Thus, upward in the volcanic sequence of the LMA, the magmas represent progressively more extensive melting of shallower sources, in a plume-influenced spreading ridge of the proto-Caribbean oceanic crust. Nb/Y versus Zr/Y systematics combined with recent plate tectonic model reconstructions reveal that Caribbean Colombian oceanic plateau fragments in Hispaniola formed through melting of heterogeneous mantle source regions related with distinct plumes during at least from Aptian–Albian (>96 Ma) to Late Campanian.