安徽铜陵地区幔源镁铁质团块研究及其地质意义

幔源岩石包体研究,是认识上地幔岩石圈物质组成、幔源岩浆演化及壳幔动力学过程的重要手段。铜陵地区小铜官山石英二长闪长岩中发育有微粒闪长质包体,并且这些微粒闪长质包体中不均匀地分布着镁铁质团块,三者的形成过程可视为铜陵地区岩浆演化的缩影,为了解本区深部岩浆作用过程提供了有力的证据。在前人研究的基础上,笔者借助电子探针、扫描电镜、电镜能谱和二次飞行时间离子探针(Tof-SIMS)对产于铜陵地区微粒闪长质包体中的镁铁质团块进行了详细的研究,首次获得了一套精确的矿物化学资料和元素分布图,总结了镁铁质团块的特征,并讨论了本区的深部岩浆作用过程。矿物学研究表明,镁铁质团块中的角闪石和辉石均已发生了不同程度的透闪石化和阳起石化蚀变,蚀变过程中,从镁钙闪石到镁角闪石,再到透闪石,随着Si的增加,角闪石呈现出Mg的富集和Ti、Al贫化的特点。团块中的富Cr磁铁矿、Ti磁铁矿和少量的铝直闪石指示了其具有深源性。Tof-SIMS元素分布图显示,透闪石主要由Al、Si、Ca、Sc、V、Cr、Mn、Cu和Sr元素组成,透辉石主要由Si、Mg、Ca、Cu和Rb组成。在铜陵地区,上地幔部分熔融形成一套玄武岩浆,受岩浆底侵作用影响,玄武岩浆上侵,进入下地壳深位岩浆房,与下地壳硅镁层发生同化混染作用,形成一套轻度演化的中基性(辉长质)玄武岩浆,镁铁质团块就是这类中基性玄武岩浆直接结晶形成的。后受构造作用影响,这类中基性玄武岩浆上侵到中地壳岩浆房(12~16 km),与中地壳的变质岩系发生同化混染和结晶分异作用形成一套中性闪长质岩浆,微粒闪长质包体就是这套闪长质岩浆发生结晶分异作用而形成的。镁铁质团块和微粒闪长质包体清楚地解释了铜陵地区深部岩浆作用过程,并有力地证明了铜陵地区中地壳的闪长质岩浆来源于下地壳的壳幔混源岩浆。     

An information systems approach to the preservation of biological diversity

Abstract

Although biological diversity has emerged in the 1980s as a major scientific and political issue, efforts at scientific assessment have been hampered by the lack of cohesive sets of data. We describe, in concept, a comprehensive national diversity information system, using geographical information system (GIS) techniques to organize existing data and improve spatial aspects of the assessment. One potential GIS analysis, to identify gaps in the network of nature reserves for California, is discussed in greater detail. By employing an information systems approach, available data can be used more effectively and better management strategies can be formulated.     

Curricula,Course Outlines and Laboratory Exercises

Many modern hydrological models require data inputs provided by automated digital terrain analysis functions incorporated into GIS. These inputs include fields representing surface flow directions, up-slope contributing areas, and sub-catchment partitions. Existing raster-based terrain analysis tools, including both those in off-the-shelf GIS packages and those in the recent literature, were designed to work with digital elevation data in mountainous topography. For highly variable topography, which may include large flood plains, lakes, wetlands, and other relatively flat areas, existing tools cannot accommodate the variable signal-to-noise in the source elevation data without significant human intervention to handle special cases. A general model for calculating flow directions, up-slope contributing areas, and sub-catchment partitions that automatically adapts to the variable information content of grid-based elevation data sets is presented here. The model uses a combination of breadth-first search and global optimization to extract the maximum amount of signal from any location within the data. The model is demonstrated to work well in handling topography dominated by large flood plains, lakes and other flat areas without the need for a large number of empirical rules. An important contribution of the approach is the handling of explicit hydrologic features, which makes the spatial representation closely related to hydrological processes. The results have important implications for developing hydrological models that are tractable in large, heterogeneous watersheds using moderate resolution data.     

温度和光照对3种雀麦属(Bromus)植物种子萌发的影响

旱雀麦(Bromus tectorum)原产于欧亚大陆,18世纪传入北美,并成为该地区的入侵植物。然而,同为雀麦属的扁穗雀麦(Bromus catharticus)和无芒雀麦(Bromus inermis)并不具有旱雀麦的入侵性。本研究设置高温、低温和黑暗等处理,探讨温度和光照对3种植物种子萌发的影响,旨在从种子萌发的角度揭示旱雀麦的入侵性。结果表明：温度和光照对旱雀麦和扁穗雀麦种子的发芽率均无明显影响(p>0.05);高温和黑暗处理显著提高了无芒雀麦种子的发芽率(p<0.05),对旱雀麦、扁穗雀麦和无芒雀麦种子的发芽势、发芽指数、日均发芽率、发芽系数、发芽峰值和发芽值有一定的促进作用,而低温处理则表现出相反的效应;高温和黑暗处理对3种植物种子的平均发芽天数和萌发持续时间有一定降低的作用,而低温处理则表现出相反的效应。同一处理下旱雀麦种子萌发各项指标均优于另两种植物,这可能是旱雀麦具有较强入侵性的重要原因。     

Circuits of scrap: closed loop industrial ecosystems and the geography of US international recyclable material flows 1995–2005

The recycling of scrap material has been identified as an important strategy in the larger theory of industrial ecology. Industrial ecology argues that the traditional model of industrial activity needs to be transformed into a 'closed loop' industrial ecosystem where used materials (scrap) and by-products would substitute for virgin materials during production processes. The recycling of scrap material forms part of this larger effort to reduce the overall environmental impact of production and consumption. A key, but as yet, unresolved question in this process is the geographic scale (local, regional, national, global) at which loop closing should take place. This preliminary empirical research examines the export and import geography of the seven largest (by weight) US scrap commodities (iron and steel, paper, plastics, aluminium, copper, nickel and zinc) between 1995 and 2005 to ascertain the extent to which US scrap flows overseas and how that might affect our understanding of how material loops can close. Other than an integrated export and import relationship with Canada, the results suggest that there are two distinct circuits of scrap flows in the USA. The USA exports a substantial portion of the recyclable scrap generated each year to rapidly developing countries, while importing smaller quantities of scrap from the EU. With the major exception of exporting higher value iron and steel scrap to China, the US tends to export lower value scrap and import higher value scrap. In part this reflects imbalances in the supply and demand for scrap between the USA and the developing world, the lack of potentially available scrap and the absence of a robust recycling infrastructure in the developing world. Although such scrap circuits are probably not ideal, the use of US scrap in the developing world is both a realistic and preferable alternative in the short to medium term than virgin production.     

Sulphur cycling in organic-rich marine sediments from a Scottish fjord

In this study, the biogeochemical transformations of sulphur in organic‐rich marine sediments in a Scottish fjord are investigated by a combination of pore water and sediment geochemistry with sulphide diffusive gradient thin‐film probes and sulphate isotopic data (δ³⁴S and δ¹⁸O). Particular attention is paid to sulphur cycling in the upper sediment profile where sulphate reduction occurs but free sulphide is below the detection limits of conventional pore water geochemical analysis but quantifiable by sulphide diffusive gradient thin film. In the uppermost part of the sediment core, δ¹⁸O sulphate decreased from near‐sea water values to +7‰, indicating that anoxic sulphide oxidation dominated during this interval. Sulphate δ³⁴S remained unchanged as there was no net sulphate reduction (i.e. reduction was balanced by re‐oxidation). Below 4 cm depth, there was a slight increase in sulphate δ³⁴S from 20‰ to 23‰ associated with minor accumulation of iron sulphide. The δ¹⁸O of the sulphate also increased, to around +10‰ at 10 cm depth, as a result of the isotopic exchange of sulphate–oxygen with pore water and/or sulphur disproportionation reactions mediated during sulphur cycling. These processes continued to increase the δ¹⁸O of the sulphate to 14‰ at 20 cm depth with no further change in the δ³⁴S of the sulphate. Below 20 cm depth, free sulphide is detectable in pore waters and both the δ³⁴S of the sulphate and sulphide increase with depth with an offset controlled by kinetic fractionation during bacterial sulphate reduction. The δ³⁴S of the sedimentary organic fraction shifted towards lower, more bacteriogenic, values with depth in the profile, without any increase in the size of this sulphur pool. Thus, the organic sulphur fraction was open to interaction with bacteriogenic sulphide without the occurrence of net addition. Therefore, caution should be exercised when using sulphur isotopic compositions to infer simple net addition of bacteriogenic sulphide to the organic sulphur fraction.     

Biolaminated sedimentation in a High Arctic freshwater lake

A laminated sequence of lacustrine sediment from an Arctic coastal lake was examined for potential chronological and successional information. The laminae are microbially induced sedimentary structures, the unlithified precursor of stromatolites and are previously unreported in the Arctic. The inferred annual sequence was interpreted to contain a basal clastic unit, overlain with successive cyanobacterial and extracellular polymeric substance units. The complex succession of laminae and inconclusive dating provide a challenge for identifying the chronological nature of the sedimentary structures. Markov chain and time series analyses suggest that a plausible, quasi-annual sequence can be identified to provide a context for palaeo-environmental reconstruction. Recognition of sedimentary structure in recent biolaminated sediments offers a first step towards the palaeo-environmental evaluation of the geomicrobiological sequence.     

Calibration of the Albian/Cenomanian Boundary by Ammonite Biostratigraphy: U.S. Western Interior

Calibration of numerical ages to the geological time scale is a long scientific pursuit that requires the integration of multiple data sets. A case study of the Albian/Cenomanian stage boundary, also the Lower/Upper Cretaceous series boundary, illustrates the calibration process. The numerical age of this boundary has shifted from 96 Ma to 99 Ma over a time span of nearly fifty years. Re-calibration resulted first from improvements in radiometric dating, and later from inferences about ammonite phylogeny, and most recently from radiometric dates of newly discovered volcanic beds interbedded with diagnostic guide fossils. However, the calibration process continues with study of cosmopolitan dinoflagellates.     

The Cocos and Carnegie Aseismic Ridges: a Trace Element Record of Long-term Plume-Spreading Center Interaction

The aseismic Cocos and Carnegie Ridges, two prominent bathymetricfeatures in the eastern Pacific, record 20 Myr of interactionbetween the Galápagos hotspot and the adjacent GalápagosSpreading Center. Trace element data determined by inductivelycoupled plasma-mass spectrometry in >90 dredged seamountlavas are used to estimate melt generation conditions and mantlesource compositions along the ridges. Lavas from seamount provinceson the Cocos Ridge are alkalic and more enriched in incompatibletrace elements than any in the Galápagos archipelagotoday. The seamount lavas are effectively modeled as small degreemelts of a Galápagos plume source. Their eruption immediatelyfollows the failure of a rift zone at each seamount province'slocation. Thus the anomalously young alkalic lavas of the CocosRidge, including Cocos Island, are probably caused by post-abandonmentvolcanism following either a ridge jump or rift failure, andnot the direct activity of the Galápagos plume. The seamountshave plume-like signatures because they tap underlying mantlepreviously infused with Galápagos plume material. Whereasplume heterogeneities appear to be long-lived, tectonic rearrangementsof the ridge plate boundary may be the dominant factor in controllingregional eruptive behavior and compositional variations. KEY WORDS: mantle plume; mid-ocean ridge; Galápagos; abandoned rift; partial melting of the mantle