Mineralogy,geochemistry and petrogenesis of the Metters Bore No. 1 lamproite pipe,Calwynyardah Field,West Kimberley Province,Western Australia

Summary The Metters Bore No. 1 lamproite (MB1) is a small unexposed pipe located in the Calwynyardah field of the Miocene West Kimberley lamproite province. Microdiamonds have been recovered from bulk sampling of the pipe but no macrodiamonds (>0.8 mm) have been found. The pipe contains both volcaniclastic and magmatic (i.e. non-fragmental, extrusive-to-hypabyssal facies) lamproite. The latter rock is dominantly olivine-leucite-diopside lamproite and comprises phenocrysts and microphenocrysts of diopside, altered olivine ( Fo₉₁), and rare phlogopite, together with phenocrysts and glomeroporphyritic aggregates of altered leucite. These are set in an altered, fine-grained to glassy groundmass including diopside, leucite, priderite, apatite, less abundant chrome-spine', perovskite, interstitial richterite with minor calcic amphibole, ilmenite, sphene and wadeite. Mineral compositions are complex and variable: for example: five compositionally distinct fields can be recognizedamong the diopsides, and three among the phlogopites. The Ti-rich, Al-poor diopsides, Ti-F-rich, Al-poor phlogopites, and potassium titanian richterites all have apparent tetrahedral site deficiencies which can best be explained by tetrahedral substitution of Ti⁴⁺ and/or Mg²⁺; no substitution of Fe³⁺ is indicated. Three major types of spinel are recognized: olivine-included titaniferous magnesiochromite (TMC), xenocrystic aluminous magnesiochromite (AMC) and leucite-included pleonaste. Spinel-olivine-melt oxygen barometry indicates that the TMC spine's crystallized from evolving lamproite magma under low oxygen fugacity conditions (MW to IW). Manganiferous groundmass ilmenite has low calculated Fe₂O₃ (< 1 wt%), also consistent with reduced conditions. The maintenance of a low oxidation state during magmatic crystallization, a feature shared with the Argyle olivine-lamproite, is considered a significant factor in preservation of the MB1 microdiamond population. Xenocrystic minerals encountered in heavy mineral concentrates (HMC) indicate that the MB1 lamproite sampled upper mantle spinel ±garnet lherzolite from >60 km depth and crustal mafic rocks. Geochemically, MB1 is typical of West Kimberley leucite-lamproites, which are characterized by high TiO₂ (> 4 wt%), low CaO (< 5 wt%), MgO < 10wt%, and enrichment in incompatible elements (Rb, Sr, Ba, LREE, etc.). Although MB1 is an olivine-bearing lamproite, it has source-related geochemical features, e.g. mantle-normalized Sc/V and Zr/Nb ratios of < 0.75 and > 0.6, respectively, that are similar to other West Kimberley leucite-lamproites and distinct from olivine-lamproites. Petrogenetically, the bulk composition and low magmatic oxidation state of MB1 supports an origin by melting of phlogopite-bearing harzburgitic source under reduced fO₂ (< MW) conditions.

---

Mineralogie, geochemie und petrogenese der lamproit-pipe Metters Bore No. 1, Kalwynyardah Field, West Kimberley Provinz, West-Australien

Zusammenfassung Der Lamproit Metters Bore No. 1 (MB1) ist eine kleine, nicht an der Oberfläche aufgeschlossene Pipe im Kalwynyardah Gebiet der miozänen Lamproit-Provinz von West Kimberley. Mikrodiamanten sind bei der Untersuchung von Proben aus der Pipe gefunden worden, jedoch keine Makrodiamanten (> 0.8 mm). Die Pipe enthält sowohl vulkanoklastischen wie magmatischen Lamproit (nicht-fragmentierte extrusive bis hypabyssische Fazies). Bei dem magmatischen lamproit handeltes sich um einen Olivin-Leuzit-Diopsid-Lamproit mit Kristallen und Mikrokristallen von Diopsid, umgewandeltem Olivin ( Fo₉₁), seltener Phlogopit, zusammen mit Kristallen und glomeroporphyritischen Aggregaten von umgewandeltem Leuzit. Diese sitzen in einer umgewandelten, feinkörnigen bis glasigen Grundmasse mit Diopsid, Leuzit, Priderit, Apatit, seltener Chromspinell, Perovskit, Richterit mit geringen Mengen an Kalziumamphibol, Ilmenit, Titanit und Wadeit. Die Mineralzusammensetzungen sind komplex und variabel: so können z.B. fünf der Zusammensetzung nach eindeutig definierte Felder für die Diopside nachgewiesen werden und drei solche für die Phlogopite. Die Ti-reichen Al-armen Diopside, Ti-F-reiche Al-arme Phlogopite und Kalium-Titan-Richterite haben alle reduzierte Besetzungen von Tetraederstellen, die am besten durch tetraedrische Substitution von Ti⁴⁺ und/oder Mg` erklärt werden können. Es gibt keine Hinweise für Substition von Fe³⁺. Drei Haupttypen von Spinellen kommen vor: Titan-führender Magnesiochromit (TMC) als Einschlüsse in Olivin, aluminiumführender Magnesiochromit (AMC) und Pleonast, der in Leuzit eingeschlossen ist. Sauerstoffbarometrie (Spinell-Olivin-Schmelze) zeigt, daß die TMC Spinelle von einem fraktionierten lamproitischen Magma bei niedriger Sauerstofffugazität (MW bis IW) kristallisiert sind. Manganführender Ilmenit der Grundmasse hat niedrige berechnete Fe₂O₃ Gehalte (< 1 %), und auch das entspricht reduzierenden Bedingungen. Die Erhaltung eines niedrigen Oxydationsstatus während der magmatischen Kristallisation ist eine Eigenschaft, die auch im Olivin-Lamproit der Argyle Pipe zu beobachten ist. Dies wird als ein signifikanter Faktor für den Erhalt der Mikrodiamanten in MBI gesehen. Xenokristalle die in Schwermineral-Konzentraten (HMC) vorkommen, weisen darauf hin, daß der MB1 Lamproit Material des oberen Mantels (Spinell ± Granatlherzolit) aus mehr als 60 km Tiefe, sowie mafische Gesteine der Kruste aufgenommen hat. Geochemisch gesehen ist MB1 typisch für die Leuzit-Lamproite von West Kimberley, welche durch hohe TiO₂ (> 4 wt.%), niedrige CaO (< 5 wt.%), MgO (< 10 wt.%) und Anreicherung von inkompatiblen Elementen (Rb, Sr, Ba, LSEE, etc.) charakterisiert werden. Obwohl MB1 ein Olivin-führender Lamproit ist, zeigt er geochemische Eigenschaften, wie Mantel-normalisierte Sc/V und Zr/Nb Verhältnisse von < 0.75 und > als 0.6, die ähnlich anderen Leuzit-Lamproiten von West Kimberley sind und sich von Olivin-Lamproiten unterscheiden. Petrogenetisch gesehen weisen sowohl die Gesamtzusammensetzung als auch der niedrige magmatische Oxydationsstatus von MBI auf eine genese durch Aufschmelzen von Phlogopit-führendem Harzburgit unter reduzierenden f0₂ (< MW) Bedingungen hin.

---

---

Deceased

---

With 12 Figures     

Effect of Bioremediation on the Microbial Community in Oiled Mangrove Sediments

Bioremediation was conducted in the field on a mature Rhizophora stylosa mangrove stand on land to be reclaimed near Fisherman’s Landing Wharf, Gladstone Australia. Gippsland crude oil was added to six large plots (>40 m²) and three plots were left untreated as controls. Bioremediation was used to treat three oiled plots and the remaining three were maintained as oiled only plots. The bioremediation strategy consisted of actively aerating the sediment and adding a slow-release fertilizer in order to promote oil biodegradation by indigenous micro-organisms. Oil addition stimulated the numbers of alkane-degrading bacteria slightly to levels of 10⁴–10⁵/g sediment. Bioremediation of the oiled sediment had a marked effect on the alkane-degrading population, increasing the population size by three orders of magnitude from 10⁵ to 10⁸ cells/g of sediment. An effect of bioremediation on the growth of aromatic-degraders was detected with numbers of aromatic-degraders increasing from 10⁴ to 10⁶ cells/g of sediment. Active aeration and nutrient addition significantly stimulated the growth of hydrocarbon-degraders in oiled mangrove sediment in the field.     

Millennial-scale sea-level control on avulsion events on the Amazon Fan

The Late Quaternary Amazon deep-sea fan provides a modern analogue to ancient fan systems containing coarse-grained hydrocarbon reservoirs. Sand lenses deposited within the Amazon Fan, due to abrupt shifts in channel pathways called avulsion events, were drilled as part of ODP Leg 155. The hemipelagic sediment directly on top of the avulsion sands was dated using primarily AMS radio carbon dating. This dating shows that these large sand lobes (1 km³) are triggered by relatively small, millennial scale changes in marine transgression and regression (±5–10 m). Relative sea level also controls the architecture of the Channel–levee distributive systems within the Amazon Fan. For example prior to 22 k calendar years BP there is a tripartite channel system. After 22 ka there is only one active Channel–levee system. Transitions between the multi-channel and single channel configurations are related to variations in the volume of sediment supply resulting in aggradation or erosion of channel floor and levee growth in the canyon-channel transition area. The sensitivity of the Amazon deep-sea Fan sedimentation to relatively small changes in sea level supports one of the central assumptions of the theory of Sequence Stratigraphy. In addition this study demonstrates how traps for hydrocarbons may have been formed in ancient fan systems.     

An analysis of noncylindrical and incongruous fold pattern from the eo-cambrian rocks of söröy, northern Norway: II. The significance of synfold stretching lineation in the evolution of noncylindrical folds

Many folds of both deformation phases on Söröy exhibit a prominent lineation brought out by elongate micas or spindleform-quartz grains. This lineation displays a variety of patterns, depending on ils orientation relative to the fold axis. This dependence confirms the primary nature of the axial noncy lindrism.The lineation is a product of layer-parallel extension and represents the long axis of the sectional strain ellipse (X¹), for the particular attitude of the layering. The formation of the lineation is confined to those layer orientations which cut the extension field of the strain ellipsoid. If the noncylindrical fold axes curve from normal into parallelism with the lineation, the patterns of lineation orientation developed will reveal the attitude of the major extension axis (X) and indicate the nature of the strain.The lineation developed in the earlier stages of fold growth and became a passive marker in later fold modification.The regional pattern of the lineation is similar to that for minor fold axes, and together they are held to identify the XY-plane of the bulk finite strain-field.     

The origin of biotite in archaean meta-sediments near Yellowknife,N. W. T., Canada

Data on mineral compositions, modal proportions and textural relations are used to deduce the biotite-forming reaction in Archaean meta-greywackes and meta-pelites of a low-pressure facies series. Biotite originated by reaction of chlorite, muscovite and ilmenite, producing rutile, K-feldspar and quartz as subordinate reaction products. Chlorite composition did not change as the reaction progressed but muscovite became depleted in K and (Mg+Fe+Mn) while gaining a little Ti. The composition of biotite produced in the meta-pelites is to some extent dependent on how much biotite was formed.     

Contents Volume 15

Volume Contents

Contents Volume 15     

White dwarf masses in magnetic cataclysmic variables: multi-temperature fits to Ginga data

One method of obtaining the mass of the white dwarf in magnetic cataclysmic variables (mCVs) is through their hard X-ray spectra. However, previous mass estimates using this method give lower limits because the temperature of the plasma in the post-shock region (where the hard X-rays are emitted) is lower than the temperature of the shock itself. In AM Her systems, the additional cooling of the post-shock plasma by cyclotron emission will further lower the derived mass. Here we present estimates of the masses of the white dwarf in 13 mCVs derived using Ginga data and a model in which X-rays are emitted from a multi-temperature emission region with the appropriate temperature and density profile. We include in the model reflection from the surface of the white dwarf and a partially ionized absorber. We are able to achieve good fits to the data. We compare the derived masses with previous estimates and the masses for larger samples of isolated white dwarfs and those in CVs.