A data-driven approach to local gravity field modelling using spherical radial basis functions

We propose a methodology for local gravity field modelling from gravity data using spherical radial basis functions. The methodology comprises two steps: in step 1, gravity data (gravity anomalies and/or gravity disturbances) are used to estimate the disturbing potential using least-squares techniques. The latter is represented as a linear combination of spherical radial basis functions (SRBFs). A data-adaptive strategy is used to select the optimal number, location, and depths of the SRBFs using generalized cross validation. Variance component estimation is used to determine the optimal regularization parameter and to properly weight the different data sets. In the second step, the gravimetric height anomalies are combined with observed differences between global positioning system (GPS) ellipsoidal heights and normal heights. The data combination is written as the solution of a Cauchy boundary-value problem for the Laplace equation. This allows removal of the non-uniqueness of the problem of local gravity field modelling from terrestrial gravity data. At the same time, existing systematic distortions in the gravimetric and geometric height anomalies are also absorbed into the combination. The approach is used to compute a height reference surface for the Netherlands. The solution is compared with NLGEO2004, the official Dutch height reference surface, which has been computed using the same data but a Stokes-based approach with kernel modification and a geometric six-parameter “corrector surface” to fit the gravimetric solution to the GPS-levelling points. A direct comparison of both height reference surfaces shows an RMS difference of 0.6 cm; the maximum difference is 2.1 cm. A test at independent GPS-levelling control points, confirms that our solution is in no way inferior to NLGEO2004.     

Inter sensor comparison between RESOURCESAT LISS III, LISS IV and AWiFS with reference to coastal landuse/landcover studies

Coastal zone assumes importance due to high productivity of ecosystems, man-made developmental activities, natural hazards and dynamic nature of the coast. As costal ecosystems are unique and fragile, understanding the impact of developmental activities on the sustainability of the coastal zone is very important. Remote sensing, because of repetitive and synoptic nature is an ideal tool for studying this. Time series data analyses for monitoring coastal zone require different type of sensors. Present study deals with atmospheric correction of satellite data, reflectance, selection of coastal features like, mudflat, mangroves, vegetated dune, coastal water, etc. and their inter-comparison using different sensor data of RESOURCESAT sensors. Reflectance values give better separateability for various coastal features in comparison to DN values. LISS IV can be used in place of LISS III or merged (LISS III + PAN) for long-term coastal zone studies.     

Effect of Look Angle on the Accuracy Performance of Fixed-Baseline Interferometric SAR

The effect of look angle on the accuracy performance of fixed-baseline interferometric synthetic aperture radar is studied. It is shown that there exists an optimal look angle that minimizes the variance of the surface height estimate for a resolution cell, and it depends upon the system as well as surface parameters. Numerical analysis confirming the existence of the optimal look angle is presented     

Feature Extraction in Remote Sensing High-Dimensional Image Data

High-dimensional image data open new possibilities in remote sensing digital image classification, particularly when dealing with classes that are spectrally very similar. The main problem refers to the estimation of a large number of classifier's parameters. One possible solution to this problem consists in reducing the dimensionality of the original data without a significant loss of information. In this letter, a new approach to reduce data dimensionality is proposed. In the proposed methodology, each pixel's curve of spectral response is initially segmented, and the digital numbers (DNs) at each segment are replaced by a smaller number of statistics. In this letter, the proposed statistics are the mean and variance of the segment's DNs, which are supposed to carry information about the segment's position and shape, respectively. Tests were performed by using Airborne Visible/Infrared Imaging Spectrometer hyperspectral image data. The experiments have shown that this methodology is capable of providing very acceptable results, in addition of being computationally efficient     

Comparison of Deep Underwater Measurements and Radar Observations of Rainfall

Deep-water acoustical measurements of rainfall are compared to high-resolution ground radar observations for the first time. The measurements of underwater ambient sound were made from a subsurface mooring near Methoni, Greece, in 2004. The acoustical measurements were at 60-, 200-, 1000-, and 2000-m depths. Simultaneous ground-based polarimetric -band radar observations were made over the acoustic mooring. Comparisons show acoustic detection of rain events and storm structure that are in agreement with the radar observations. Results from a comparison between the underwater sound pressure level at different depths and the observed radar reflectivities are presented.     

High-Resolution Forecast Models of Water Vapor Over Mountains: Comparison With MERIS and Meteosat Data

Propagation delay due to variable tropospheric water vapor (WV) is one of the most intractable problems for radar interferometry, particularly over mountains. The WV field can be simulated by an atmospheric model, and the difference between the two fields is used to correct the radar interferogram. Here, we report our use of the U.K. Met Office Unified Model in a nested mode to produce high-resolution forecast fields for the 3-km-high Mount Etna volcano. The simulated precipitable-water field is validated against that retrieved from the Medium-Resolution Imaging Spectrometer (MERIS) radiometer on the Envisat satellite, which has a resolution of 300 m. Two case studies, one from winter (November 24, 2004) and one from summer (June 25, 2005), show that the mismatch between the model and the MERIS fields ( rms = 1.1 and 1.6 mm, respectively) is small. One of the main potential sources of error in the models is the timing of the WV field simulation. We show that long-wavelength upper tropospheric troughs of low WV could be identified in both the model output and Meteosat WV imagery for the November 24, 2004 case and used to choose the best time of model output.     

Motion Analysis in SAR Images of Unfocused Objects Using Time–Frequency Methods

Synthetic aperture radar (SAR) image formation processing assumes that the scene is stationary, and to focus an object, one coherently sums a large number of independent returns. Any target motion introduces phases that distort and/or translate the target's image. Target motion produces a smear primarily in the azimuth direction of the SAR image. Time-frequency (TF) modeling is used to analyze and correct the residual phase distortions. An interactive focusing algorithm based on TF modeling demonstrates how to correct the phase and to rapidly focus the mover. This is demonstrated on two watercraft observed in a SAR image. Then, two time-frequency representations (TFRs) are applied to estimate the motion parameters of the movers or refocus them or both. The first is the short-time Fourier transform, from which a velocity profile is constructed based on the length of the smear. The second TFR is the time-frequency distribution series, which is a robust derivative of the Wigner-Ville distribution that works well in this SAR environment. The smear is a modulated chirp, from which a velocity profile is plotted and the phase corrections are integrated to focus the movers. The relationship between these two methods is discussed. Both methods show good agreement on the example.     

Testing satellite and ground thermal imaging of low-temperature fumarolic fields: The dormant Nisyros Volcano (Greece)

The Nisyros Volcano (Greece) was monitored by satellite and ground thermal imaging during the period 2000–2002. Three night-scheduled Landsat-7 ETM⁺ thermal (band 6) images of Nisyros Island were processed to obtain land surface temperature. Ground temperature data were also collected during one of the satellite overpasses. Processed results involving orthorectification and 3-D atmospheric correction clearly show the existence of a thermal anomaly inside the Nisyros Caldera. This anomaly is associated mainly with the largest hydrothermal craters and has land surface temperatures 5–10 °C warmer than its surroundings. The ground temperature generally increased by about 4 °C inside the main crater over the period 2000–2002. Ground thermal images of the hydrothermal Stephanos Crater were also collected in 2002 using a portable thermal infrared camera. These images were calibrated to ground temperature data and orthorectified. A difference of about 0–2 °C was observed between the ground thermal images and the ground temperature data. The overall study demonstrates that satellite remote sensing of low-temperature fumarolic fields within calderas can provide a reliable long-term monitoring tool of dormant volcanoes that have the potential to reactivate. Similarly, a portable thermo-imager can easily be deployed for real-time monitoring using telemetric data transfer. The operational costs for both systems are relatively low for an early warning system.     

Modeling thermal deformation of VLBI antennas with a new temperature model

Temperature variations at very long baseline interferometry (VLBI) sites cause thermal deformations of the VLBI antennas and corresponding displacements of the VLBI reference points. The thermal deformation effects typically contain seasonal and daily signatures. The amplitudes of the annual vertical motion of the antenna reference point can reach several millimeters, depending on the design of the antenna structure, on the material, and on the environmental effects such as global station position, station height and climatology effects. Simple methods to correct this effect use the difference of the environmental temperature with respect to a defined reference temperature, the antenna dimensions, the elevation of the antenna, the material of antenna structure. Applying these simple models for thermal deformation in the VLBI data analysis improves the baseline length repeatability by 3.5%. A comparison of these simple models with local thermal deformation measurements at the antennas in Onsala and Wettzell show that the local measurements and the modeled corrections agree well when the temperature of the antenna structure is used, but agree less good when the surrounding air temperatures are used. To overcome this problem we present a method to model temperature penetration into the antenna structures, that allows to model thermal deformation effects that agree with the observed vertical deformation of the Onsala and Wettzell radio telescopes with a root mean square deviation of 0.07 and 0.13 mm, respectively. Possible implementations in the VLBI analysis are presented, and the definition of an adequate reference temperature is discussed.