Multiple longshore sand bars in the upper Chesapeake Bay

In the upper Chesapeake Bay (Maryland, U.S.A.) field surveys were conducted at 18 multiple longshore sand bar sites. The multiple bar systems were found in water depths less than approximately 2 m (mean sea level), and exhibited mild bottom slopes of 0·0052 or less. The number of bars composing each system ranged from four to 17 and the spacing between the crests typically increased in the offshore direction, ranging from 12 to 70 m. Bar height also typically increased with distance offshore and ranged from 0·03 to 0·61 m. A grain size analysis of crest and trough sediment did not reveal any significant differences and the sediment was categorized as ‘fine sand’. A review of the literature data indicated that the Chesapeake Bay multiple bars possessed similar characteristics to those found in Gelding Bay (Baltic Sea); similarities in fetch, wave height and tidal range between the two bays may account for this finding. The surf-scaling parameter indicated that the multiple bar systems were extremely dissipative with regard to wave energy, and wave height appeared to be an important factor in controlling bar spacing and bar height. A multiple wave break point hypothesis was discussed as a possible mechanism for the formation of Chesapeake Bay multiple longshore bars, and limited observational evidence appeared to support such a mechanism.     

Organotemplate silica deposition in Neoproterozoic deep-marine environments: evidence from the Penganga Group, Adilabad, India

Silica in bedded cherts interstratified with manganese carbonates in a deep‐water carbonate ramp succession of the Neoproterozoic Penganga Group, India, displays film‐like, spherical to rod‐shaped, and tubular branching microstructures. The microstructures resemble mineralized extracellular polysaccharides, biofilms and bacterial morphologies. The microstructures suggest silicification by nucleation of silica on organic‐templates or indirectly as sorbed species accumulating on organic templates. Given that similar microstructures have also been documented in Archean cherts it is proposed that organotemplates might have been an important sink for the deposition of silica in Precambrian deep‐water marine environments.     

Fluid production and isograd reactions at contacts of carbonate-rich and carbonate-poor layers during progressive metamorphism

ABSTRACT With increasing temperature during prograde metamorphism reactions will occur first at the lithological contacts of mixed pelite and calcsilicate terranes. At these interfaces, a fluid of lower chemical potential of H₂O and CO₂ than that required to produce a fluid in either layer can be produced whether reaction is caused by fluid infiltration or is initially fluid absent. If the interface region does not allow fluid transport then as temperature increases, a fluid pressure greater than lithostatic can develop. At some degree of over-pressure relative to rock pressure, the fluid hydraulically fractures the rock and a gradient in fluid composition away from the contact can be produced. These phenomena occur at the compositional interfaces whenever univariant reactions in the differing layers cross on a temperature vs. mole fraction of CO₂ diagram with slopes of opposite sign. The first occurrence of these reaction products at lithological contacts delineates an isograd that defines temperature as well as the mole fraction of CO₂ at constant pressure in systems open to fluid transport. These isograds can be contrasted with fluid-producing isograds in closed systems. As an illustration of possible effects, the reactions quartz + clinozoisite + muscovite = anorthite + K-feldspar + H₂O and phlogopite + quartz + calcite = tremolite + K-feldspar + H₂O + CO₂ at 4 kbar are analysed and equations for fluid production and transport are developed.     

SHRIMP U–Pb ages of diagenetic and hydrothermal xenotime from the Archaean Witwatersrand Supergroup of South Africa

SHRIMP dating of xenotime overgrowths on detrital zircon grains can constrain maximum durations since diagenesis and therefore provide minimum dates of sediment deposition. Thus, xenotime dating has significant economic application to Precambrian sediment-hosted ore deposits, such as Witwatersrand Au–U, for which there are no precise depositional ages. The growth history of xenotime in the Witwatersrand Supergroup is texturally complex, with several phases evident. The oldest authigenic xenotime ²⁰⁷Pb/²⁰⁶Pb age obtained in sandstone underlying the Vaal Reef is 2764 ± 5 Myr (1 σ), and most likely represents a mixture of diagenetic and hydrothermal growth. Nevertheless, this represents the oldest authigenic mineral age yet recorded in the sequence and provides a minimum age of deposition. Other xenotime data record a spread of ages that correspond to numerous post-diagenetic thermotectonic events (including a Ventersdorp event at ≈ 2720 Ma) up to the ≈2020 Ma Vredefort event.     

Structurally controlled gold and sulfosalt mineralization: the Altenberg example, Salzburg Province, Austria

Summary ?In the south-eastern Altenbergkar–Silbereck area in the eastern Tauern window (Lungau, Salzburg) structurally controlled precious-metal (Au–Ag) mineralization is hosted in marbles of the Permo(?)-Mesozoic Silbereck Formation and in the underlying Variscan Central gneiss. During the Alpine otogeny both lithologies were affected by ductile deformation (shearing, D1; folding, D2/D3) and subsequent brittle deformation (tension gashes, D4; normal faulting, D5) related to the uplift and exhumation of the Tauern window. Mineralization is controlled by brittle D4 structures. NE–SW trending steeply dipping tension gashes of the “Tauerngoldgang” type occur within the Central gneiss. Three different marble-hosted ore types following fracture systems as well as foliation and bedding planes can be distinguished: 1) metasomatic replacement ores, 2) ores in tension gashes and 3) ores in talc-bearing structures, often containing high-grade gold and silver mineralization (native gold in association with Ag–Pb–Bi–sulfosalts). Four stages of mineralization can be distinguished which occur in all ore types: arsenopyrite–pyrite–pyrrhotite (first stage), Au–(Ag–Pb–Bi–sulfosalts) (second stage), base-metal sulfides and tetrahedrite–tennantite (third stage) and Ag-rich galena (fourth stage). Preliminary fluid inclusion data indicate temperatures of ore formation well above 300 °C (346 °C mean) for the second stage within the Central gneiss and temperatures between 310 and 230 °C for the second and third stages in the marble. Received October 12, 2001; revised version accepted September 5, 2002 Published online March 10, 2003     

Evidence for the loss of snow-deposited MSA to the interstitial gaseous phase in central Antarctic firn

We have examined several MSA (methanesulfonic acid) records from the upper 200 m of the Antarctic ice sheet and in particular the new Dome F profile. At all the four sites studied, concentration profiles exhibit similar patterns as a function of depth. They suggest that snow metamorphism and solid phase migration are responsible for a marked release of gaseous MSA to interstitial firn air as well as probably to the free atmosphere, in particular at extremely low accumulation sites. Snow acidity can also modify MSA concentration. It is proposed that, below the upper few metres where the communication with the free atmosphere is possible, gaseous MSA may remain in the firn layers and be entrapped later in air bubbles at pore close-off, i.e. when firn is transformed into ice. Chemical measurements on the firn core do not take into account the MSA released to the gaseous phase, but this fraction is measurable in ice samples. In spite of these alterations occurring in the firn layers, relative changes of the atmospheric MSA concentration in the past are probably still there deep within the Antarctic ice sheet. However, for glacial periods, different processes have to be considered in relation to modified aerosol properties.     

Tephrochronology and tephrostratigraphy of two Pleistocene continental fossiliferous successions from central Italy

The stratigraphical context of two Middle Pleistocene fossiliferous palaeosols from Central Italy (Abruzzo and Tuscany) have been studied. Small mammals and molluscs occur in both palaeosols, which are covered by tephra layers that were analysed using an interdisciplinary approach. Application of fission‐track dating to apatites separated from the Case Picconetto tephra (Pescara, Abruzzo), yielded an age of 0.48 ± 0.04 Ma, indistinguishable from those previously determined for the Campani Quarry (Lower Valdarno, Tuscany) (0.46 ± 0.05 Ma and 0.48 ± 0.05 Ma). Geochemical and petrographic investigations indicate that these tephra originated from different volcanoes, the Alban Hills Volcanic Complex and the Vico Volcano (Latium) respectively. Small mammal and mollusc assemblages indicate different palaeoclimatic and palaeoenvironmental conditions for the Case Picconetto and Campani Quarry palaeosols. Warm and humid conditions can be inferred for the Campani Quarry site, whereas open and cold conditions can be inferred for Case Picconetto. On the basis of faunal data, fission‐track dates and attribution of tephra to specific volcanic eruptions, we suggest a correlation of these faunas with marine oxygen isotope stage 14 (Case Picconetto) and with marine oxygen isotope stage 11 (Campani Quarry), respectively. Copyright © 2003 John Wiley & Sons, Ltd.     

Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.     

Modelling of deformation response and chemo‐mechanical coupling in chalk

A constitutive relation is derived for describing the mechanical response of chalk. The approach is based on a phenomenological framework which employs chemo‐plasticity. The properties of the material are assumed to be affected by the physico‐chemical processes that occur through the interaction between the skeleton and the pore fluid. The underlying mechanism is discussed by invoking a micromechanical analysis. The performance of the framework is illustrated by examining the evolution of mechanical characteristics in the presence of different pore fluids. Copyright © 2006 John Wiley & Sons, Ltd.