Concerning the multiscale structure of solar convection

The discrete scale spectrum of the convective flows observed on the Sun has not yet received a convincing explanation. Here, an attempt is made to find conditions for the coexistence of convective flows on various scales in a horizontal fluid layer heated from below, where the thermal diffusivity varies with temperature in such a way that the static temperature difference across a thin sublayer near the upper surface of the layer is many times larger than the temperature variation across the remainder of the layer. The equations of two-dimensional thermal convection are solved numerically in an extended Boussinesq approximation, which admits thermal-diffusivity variations. The no-slip conditions are assumed at the lower boundary of the layer; either no-slip or free-slip conditions, at the upper boundary. In the former case, stable large-scale rolls develop, which experience small deformations under the action of small structures concentrated near the horizontal boundaries. In the latter case, the flow structure is highly variable, different flow scales dominate at different heights, the number of large rolls is not constant, and a sort of intermittency occurs: the enhancement of the small-scale flow component is frequently accompanied by the weakening of the large-scale one, and vice versa. The scale-splitting effects revealed here should manifest themselves in one way or another in the structure of solar convection.     

西格陵兰Disko湾表层沉积硅藻组合研究

本文分析了西格陵兰Disko湾的表层沉积物硅藻,发现并统计了分属于39个属的78个硅藻种及其变种。应用对应分析方法,对Disko湾表层沉积硅藻组合进行了分类:组合Ⅰ为Fragilariopsis cylindrus-Fragilariopsis oceanica组合,主要分布在西格陵兰Disko湾南部的近岸和外海处;组合Ⅱ为Detonula confervaceae休眠孢子-Thalassiosira nordenskioeldii组合,都分布在Dis-ko湾北部海域。其中,根据海流等环境要素的不同,组合Ⅰ又可进一步划分为两个亚区:组合Ⅰa为F.cylindrus-F.oceanica-Pauliella taeniata组合,主要分布于沿岸海区;组合Ⅰb为F.cy-lindrus-F.oceanica-Thalassiosira antarcticavar.borealis休眠孢子-Thalassiosiracf.antarcticavar.borealis组合,分布于外海区域。     

Magnetization properties of intrusive/extrusive rocks from East Maio (Republic of Cape Verde) and their geological implications

Summary. The remanent magnetization of intrusive/extrusive rocks of the 'basement' complex of East Maio constitutes four components that define two different axes of magnetization, at around dec. 328, inc. 12 and dec. 007, inc. 14 respectively. In general, two or more components co-exist in separate specimens or sites but both axes are present most frequently in the normal sense. The NNW-striking axis, the B-axis, fits very well with the Upper Cretaceous polar wander path for Africa. It is consequently inferred that the major phase of sheet intrusions in Maio dates from this time, probably from the interval 90–70 Myr bp. Comparisons of the directional dispersions in the folded and unfolded states suggest that this injection phase post-dates the uplift of the Central Igneous Complex of the island. The second axis of magnetization, the A -axis, agrees very well with late Teritary—Quaternary palaeomagnetic data for Africa and the Canary Islands. The A -axis is therefore regarded as of secondary origin, being the consequence of a thermal/ chemical overprint during the Miocene—Pliocene volcanism on the island. The occurrence of a 50–70 Myr long period of volcanic quiescence and erosion, between the termination of the early igneous activity (Upper Cretaceous) and the rejuvenated magmatism in Miocene/Pliocene time, is compatible with similar observations in the Canary Islands. In contrast to the palaeomagnetic conclusions, the K/Ar data only give ages around 10 Myr. The unusually young isotope dates are regarded as being due to an almost complete age resetting and are seen in conjuction with the overprinted magnetization. This explanation is further supported by the fact that K/Ar results of pillow lavas underlying Upper Jurassic limestones only give Tertiary ages.     

Conversion between solid and beam element solutions of finite element method based on meta-modeling theory: development and application to a ramp tunnel structure

In this study, a new method for conversion of solid finite element solution to beam finite element solution is developed based on the meta-modeling theory which constructs a model consistent with continuum mechanics. The proposed method is rigorous and efficient compared to a typical conversion method which merely computes surface integration of solid element nodal stresses to obtain cross-sectional forces. The meta-modeling theory ensures the rigorousness of proposed method by defining a proper distance between beam element and solid element solutions in a function space of continuum mechanics. Results of numerical verification test that is conducted with a simple cantilever beam are used to find the proper distance function for this conversion. Time history analysis of the main tunnel structure of a real ramp tunnel is considered as a numerical example for the proposed conversion method. It is shown that cross-sectional forces are readily computed for solid element solution of the main tunnel structure when it is converted to a beam element solution using the proposed method. Further, envelopes of resultant forces which are of primary importance for the purpose of design, are developed for a given ground motion at the end.     

Regional setting of Håkon Mosby Mud Volcano, SW Barents Sea margin

The Håkon Mosby Mud Volcano (HMMV) is a seafloor mud volcano, having a 1-km-diameter circular shape and a relief of 8–10?m. HMMV is located within a slide scar on the Bjørnøya glacial submarine fan on the SW Barents Sea slope, and is underlain by a >6-km-thick Cenozoic sequence. Multichannel seismic data reveal a 1- to 2-km-wide disturbed zone, which extends to a depth of >3?km below the HMMV. We relate the zone to the presence of free gas. The seismic data are compatible with an intrasedimentary sourced mud volcano related to the glacial sedimentation history and mass movements.     

Evaluation of a multi-model approach to estimate leaf wetness duration: an essential input for disease alert systems

Theoretical and Applied Climatology - Disease alert systems (DAS) of the AgroClimate platform are intended to facilitate grower decision-making when planning fungicide applications. These DAS...     

Holocene environmental change and the accumulation–erosion balance of sheltered river-mouth sediments, Göteborg, SW Sweden

Holocene sedimentological change was investigated in 15 sediment piston cores (250 cm long) from the mouth of the Göta älv River, outside of Göteborg, which is sheltered by an archipelago. The main objective was to interpret recent, natural and human-induced influences upon the accumulation–erosion balance and the sedimentary environment from Holocene sediment units. The five main units are: consolidated glaciomarine clay (Facies gC) lowermost, consolidated estuarine clay (Facies dC), soft sub-recent sediment (Facies omC and Facies C) uppermost and dumped sediment (Facies D) in some parts of the study area. The sediment facies are divided by two major hiatuses: (a) the early Holocene hiatus between Facies gC and dC involves a time gap of at least 7000 years, ending at ca. 4000 BP and (b) the late Holocene hiatus between the consolidated clays (Facies gC and dC) and Facies omC spans 1000 years and ends ca. 50 BP (i.e. 100 years ago). Both hiatuses probably relate to the effects of isostatic land uplift. Surface sediments consist mainly of an organic-matter-rich clay facies, suggesting changes in the trophic state of the estuary during the last 100 years. Together with human-induced increased river erosion and loss of accommodation space in the estuary, this caused the onset of sedimentation in the estuary. The recent sediments are contaminated with heavy metals (Cu, Zn, Pb, Hg), with highest concentrations in the lower part of Facies omC.     

Land-derived pollutant hydrocarbons

Evidence is given for the derivation of oil pollution from on-shore sources and for a possible relation between its concentration in estuarine sediment and in the lipids of the sediment biomass.     

A system for large volume aerosol sampling in the stratosphere using electrostatic precipitation

Summary An instrumental system for securing aerosol samples in the stratosphere by electrostatic precipitation has been developed. The system is designed to be balloon borne to altitudes between 30 km and 45 km and to collect with high efficiency the aerosol content of the stratosphere at these altitudes. Volumetric sampling rates of one meter³ sec^–1 ambient air are obtained with the sampling configuration with collection efficiency in excess of 95 percent for particles between .01 microns (mmd) and 2 microns (mmd).Specially developed associated instrumentation for altitude and air flow measurement points to an important versatility in the application of gas discharges for low-pressure (or high altitude) altimetry and anemometry over a very wide range of air densities and tempertures.The theory, operation, and performance of the aerosol sampling system and associated subsytems are described. Certain new observations of low-density corona physics phenomena are reported and potential applications to other areas of research and technology are indicated.

---

Zusammenfassung Es wurde ein Instrument entwickelt, mit dem man Aerosolproben aus der Stratosphäre durch elektrostatischen Niederschlag erhalten kann. Das System wird von einem Ballon in Höhen zwischen 30 und 45 km getragen und sammelt mit hoher Wirksamkeit Proben des Aerosolgehalts in diesen Höhen. Mit dem Instrument wird eine Sammelgeschwindigkeit von 1 m³/sek erreicht bei einer Sammelwirksamkeit von mehr als 95% für Partikel von Größen zwischen 0,01 und 2 Mikron.Besonders entwickelte angeschlossene Instrumente zur Messung der Höhe und der Luftströmungen zeigen die wesentliche Vielseitigkeit der Anwendung von Gasentladungen für die Höhenmessung und Windmessung bei niedrigem Druck (oder in großen Höhen) in einem großen Bereich der Luftdichte und der Temperatur.Es werden die Theorie, die Arbeitsweise und die Ausführung des Aerosolprobeninstrumentes und der angeschlossenen Hilfssysteme beschrieben. Es wird über einige neue Beobachtungen aus dem Bereich der Phänomene der Gasentladungen bei niedriger Dichte berichtet und neue mögliche Anwendungen in anderen Zweigen der Forschung und Technologie werden angegeben.

---

Résumé On a construit un instrument au moyen duquel on peut obtenir des échantillons d'aérosole stratosphérique par précipitation électrostatique. Le système est emporté par un ballon à des altitudes de 30 à 45 km et rassemble avec efficacité des echantillons du contenu de l'aérosole à ces altitudes. Avec cet appareil, on obtient une vitesse de prise de 1 m³/sec avec une efficacité de plus de 95% pour les particules comprises entre 0,01 et 2 microns.Des appareils spéciaux annexes permettent de mesurer la hauteur et les courants d'air. Ils démontrent les possibilités multiples de l'utilisation de la décharge dans un gaz pour la mesure de l'altitude et des vents par pression très faible (ou à très haute altitude) dans un domaine étendu tant de la densité de l'air que de la température.On décrit dans ce mémoire la théorie, le mode de travail et l'exécution de cet instrument de prise d'échantillons d'aérosoles ainsi que des systèmes auxiliaires annexes. On rapporte sur quelques nouvelles observations faites dans le domaine des phénomènes connexes à la décharge dans un gaz par faible densité. On indique en outre de nouvelles possibilités d'utilisation du système dans d'autres branches de la recherche ou de la technologie.

---

---

With 16 Figures

---

This work has been supported by the Division of Biology and Medicine, U. S. Atomic Energy Commission, under contract at (30-1)-2363 with Del Electronics.     

Boundary skin friction and sediment transport about an animal-tube mimic

ABSTRACT
A flume study was made of fluid flow, boundary skin friction, and sediment transport about an animal-tube mimic. The effect of a tube on momentum transfer depends most strongly on its height. A tube increases the net boundary skin friction locally and tends to promote sediment entrainment near its base. Flow in this region appears to be governed by the same similarity laws that apply to cylinders with much larger body Reynolds number. Particles travelling as suspended load may be deposited immediately downstream of the tube. The net sedimentological effect of any tube (i.e. deposition or scour) will depend both on its height and on the boundary shear stress imposed by the external flow. The near-wake region of a tube is dominated by a strong cross-stream exchange of momentum. Wake perturbations decay downstream seemingly in accordance with similarity laws which also govern mounted, two-dimensional structures.