The Bengal Fan: Some preliminary results from ODP drilling

Three deep holes, with a maximum penetration of 960 m below sea floor, were drilled into the distal Bengal Fan just south of the equator during ODP Leg 116. The entire section recovered is dominated by sandy silt and mud turbidites derived from the Ganges Delta and from the continental margin of the western Bay of Bengal, interbedded with thin pelagic clays and with biogenic turbidites probably from a local sea mount source. The effects of Hi-Malayan uplift, sea level fluctuations, local tectonics, and fan channel/lobe processes have closely interacted to produce the observed sedimentary record of the past 17 million years since the early Miocene.Coauthors include: James R. Cochran, Lamont-Doherty Geological Observatory (Co-chief scientist); Dorrik A. V. Stow, Nottingham University, England (Co-chief scientist); Christian A. Auroux, Texas A & M University, USA (ODP staff scientist); Kazou Amano, Ibaraki University, Japan; Peter S. Balson, British Geological Survey, Keyworth, Notts, England; Jacques Boulegue, Pierre & Marie Curie University, Paris, France; Garrett W. Brass, University of Miami, Florida, USA; Jeffrey Corrigan, University of Texas, Austin, USA; Stefan Gartner, Texas A & M University, USA; Stuart A. Hall, University of Houston, Texas, USA; Silvia Iaccarino, University of Parma, Italy; Toshio Ishizuka, University of Tokyo, Japan; trena Kacmarska, Mount Allison University, New Brunswick, Canada; Heidemarie Kassens, Kiel University, West Germany; Gregory Leger, Dalhousie University, Halifax, Nova Scotia, Canada; Franca Proto Decima, University of Padova, Italy; C. V. Raman, Andhra University, Visakhapatnam, India; William W. Sager, Texas A & M University, USA; Kozo Takahashi, Woods Hole Oceanographic Institution, USA; Thomas Thompson, 580 Euclid Ave, Boulder, Colo, USA; Jean-Jacques Tiercelin, University of Bretagne, Brest, France; Mark Townsend, University of Nottingham, England; Andreas Wetzel, Tubingen University, West Germany; N. P. Wijayananda, National Aquatatic Resource Agency, Colombo, Sri Lanka; and Colin Williams, Lamont-Doherty Geological Observatory.     

Descriptive Analysis and Classification of Benthic Communities in Some Mediterranean Coastal Lagoons (Central Italy)

Abstract. Benthic samples were taken seasonally at 32 stations in five coastal lagoons of Central Italy (Fogliano, Monaci, Caprolace, Fondi, and Lungo) during a two-year period (1982–1984). Composition and distribution of benthic populations in each lagoon as well as seasonal trends of species richness, density, diversity, and redundancy are presented and discussed.
The faunal differentiation appeared to be mainly due to the different degree of water exchange, both with marine and continental systems.     

AN ECOSYSTEM MODEL ANALYSIS OF THE EFFECT OF MINE TAILINGS ON THE EUPHOTIC ZONE OF A PELAGIC ECOSYSTEM

A computer analysis was performed on experimental results obtained when mine tailings were added to seawater. The Mixed Upper-Layer Ecotrophie Simulation (MULES) model was tested by changing the extinction coefficient and the abundance of heterotrophic zooflagellates. Increasing the extinction coefficient resulted in a delay of phytoplankton growth, an increase in zooplankton standing stock and better growth of autotrophic flagellates compared with diatoms. Zooflagellates in the ecosystem influence the growth of zooplankton; secondary production by zooplankton was markedly depressed at low levels of zooflagellates. These results are believed to be of general significance for the diagnosis of suspended sediment effects on planktonic ecosystems.     

A new methodology developed by cetena to assess the seakeeping behaviour of marine vessels

The paper describes an analytical method to determine an operability index for a marine vehicle when its geometric characteristics, the geographical area in which the vessel is supposed to operate, and the limiting criteria for operations are known. The computer program based on strip theory provides reliable results not only for conventional hullforms, but also for catamarans, offshore vehicles, etc. The results are presented in the form of figures for different vessels, namely, crane barge, naval vessels and SWATH type catamarans. The authors are of the opinion that the proposed method would provide the designer with a valid tool to improve the seakeeping qualities of a vessel, while taking into account the limiting conditions imposed due to seaway operations.     

Effects of taxonomic uncertainty on species diversity indices

As a result of taxonomic uncertainty, generic and higher taxonomic ranks (family, order, class or phylum) are often treated as units in calculating diversity indices, instead of species. In this paper, the errors introduced by such practices are examined for various diversity indices (Shannon - Wiener Index, Maximum Information Index, Evenness, Margalef's Species Richness Index and Hurlbert's Probability of Interspecific Encounter). The use of higher taxonomic ranks may invalidate comparison of diversity indices. In a single study, substantial error and erroneous conclusion may arise, even if consistent practices are adopted.     

Comparison of polycyclic aromatic hydrocarbon distributions and sedimentary organic matter characteristics in contaminated, coastal sediments from Pensacola Bay, Florida

In this study, we examined the distribution of polycyclic aromatic hydrocarbons (PAHs) in a contaminated coastal area and the characteristics of the natural organic matter in tandem. We present a detailed study of PAH concentration, distribution, and organic matter characteristics of three core samples from Pensacola Bay, Florida. Solid-state 13C Nuclear Magnetic Resonance (NMR), pyrolysis gas chromatography coupled with mass spectrometry (GC-MS), and tetramethyl ammonium hydroxide (TMAH) thermochemolysis GC-MS were applied to obtain structural details about the sedimentary organic matter. Elemental compositions (carbon and nitrogen) and estimates of black carbon contents are also reported. These coastal sediments were found to contain more PAHs in the upper 15 cm layers than in the bottom 15-25 cm samples. The samples that contained the most PAHs also contained the least amount of aromatic carbon and contained a significant amount of paraffinic carbon. Lignin-derived pyrolysis and TMAH thermochemolysis products were abundant and generally higher in all of the samples in comparison to those reported for modern coastal sediments, indicating a large flux of terrestrial carbon. The black carbon contents were found to range from 4.3% to 6.8%, which are significantly lower than other reports of black carbon in sediments, which represent as much as 65% of the total organic carbon content. The low black carbon content suggests that this type of refractory carbon may not be as responsible for regulating PAH distribution as indicated by other researchers.     

Measuring and modelling temporal trends of 226Ra in waters of a Spanish estuary affected by the phosphate industry

The presence and temporal evolution (1990-2001) of (226)Ra in a tidal estuary affected by the phosphate industry has been investigated. Water samples collected in the course of four separate sampling campaigns were analysed for (226)Ra content using a gas flow proportional counter following Ba coprecipitation. Two (226)Ra sources have been identified: direct discharges from the industrial complex and run-off from a phosphogypsum pile. Although activity levels are similar, or even higher, than those found in other environments affected by the phosphate industry, there has been a general decrease in contamination since direct discharges ceased in 1998 due to new regulations from the EU. However, sediments are now acting as a source of Ra to the water column due to redissolution processes. A numerical model of the estuary has been developed to describe quantitatively the experimental results. The model solves the hydrodynamics and the dispersion equation of (226)Ra including interactions with sediments. Model results are, in general, in good agreement with observations.     

Using ocean ambient noise for array self-localization and self-synchronization

Estimates of the travel times between the elements of a bottom hydrophone array can be extracted from the time-averaged ambient noise cross-correlation function (NCF). This is confirmed using 11-min-long data blocks of ambient noise recordings that were collected in May 1995 near the southern California coast at an average depth of 21 m in the 150-700 Hz frequency range. Coherent horizontal wavefronts emerging from the time derivative of the NCF are obtained across the array's aperture and are related to the direct arrival time of the time-domain Green's function (TDGF). These coherent wavefronts are used for array element self-localization (AESL) and array element self-synchronization (AESS). The estimated array element locations are used to beamform on a towed source.     

Estuary/ocean exchange and tidal mixing in a Gulf of Maine Estuary: A Lagrangian modeling study

A Lagrangian particle method embedded within a 2-D finite element code, is used to study the transport and ocean–estuary exchange processes in the well-mixed Great Bay Estuarine System in New Hampshire, USA. The 2-D finite element model, driven by residual, semi-diurnal and diurnal tidal constituents, includes the effects of wetting and drying of estuarine mud flats through the use of a porous medium transport module. The particle method includes tidal advection, plus a random walk model in the horizontal that simulates sub-grid scale turbulent transport processes. Our approach involves instantaneous, massive [O(500,000)] particle releases that enable the quantification of ocean–estuary and inter-bay exchanges in a Markovian framework. The effects of the release time, spring–neap cycle, riverine discharge and diffusion strength on the intra-estuary and estuary–ocean exchange are also investigated.The results show a rather dynamic interaction between the ocean and the estuary with a fraction of the exiting particles being caught up in the Gulf of Maine Coastal Current and swept away. Three somewhat different estimates of estuarine residence time are calculated to provide complementary views of estuary flushing. Maps of residence time versus release location uncover a strong spatial dependency of residence time within the estuary that has very important ramifications for local water quality. Simulations with and without the turbulent random walk show that the combined effect of advective shear and turbulent diffusion is very effective at spreading particles throughout the estuary relatively quickly, even at low (1 m²/s) diffusivity. The results presented here show that a first-order Markov Chain approach has applicability and a high potential for improving our understanding of the mixing processes in estuaries.     

Degradation in Cemented Marine Clay Subjected to Cyclic Compressive Loading

The influence of cyclic loading on the strength and deformation behavior of cemented marine clay has been studied. This marine clay is of recent Pleistocene origin and deposited in a shallow water marine environment. Open pits were dug in sheeted enclosures and from these pits, undisturbed samples were taken for strength testing. A series of standard triaxial shear tests and stress controlled one-way cyclic load tests were conducted at consolidation stress ranges below and above the preconsolidation pressure. For the stress levels below the preconsolidation pressure, the cyclic loading has brought about the collapse of the cementation bond through an increase in strains, and at higher pressure ranges, the soil behaves like typical soft clay. This experiment studied the rate of development of strain and pore water pressure and shows that rate is a function of number of cycles, applied stress, and stress history. In addition, soil degradation during cyclic loading is studied in terms of Degradation Index. Attempt has been made to predict stain, pore water pressure, and degradation index through an empirical model.