鄂尔多斯盆地姬塬西部三叠系延长组长8油层组成岩作用与致密化过程*

利用岩心、铸体薄片、扫描电镜、碳氧同位素及流体包裹体等资料,对鄂尔多斯盆地姬塬西部三叠系延长组长8油层组致密储集层特征进行了研究,重点分析了储集层成岩作用特征和储集层致密化成因机制及过程。研究区长8油层组砂岩主要为岩屑长石砂岩和长石岩屑砂岩,经历了压实—压溶、胶结、交代、溶蚀及构造破裂等成岩作用,整体处于中成岩A期晚期。典型成岩序列依次为机械压实、绿泥石黏土膜、早期(泥晶)方解石胶结、石英次生加大、长石、岩屑溶蚀、自生高岭石胶结、自生石英胶结、中期(含)铁方解石胶结。综合研究认为:(1)近物源伴随湖平面快速上升的沉积环境提供了储集层致密化的物质基础,不同沉积微相储集层物性差别较大,分流河道最好,分流间湾最差;(2)长8油层组原始孔隙度为41.35%,压实作用损孔率为50.67%,造成储集层孔隙度急剧降低,胶结作用损孔率为37.48%,导致孔隙度进一步减小,溶蚀作用仅增加了3.26%的孔隙度,难以有效改善储集层质量;(3)上述沉积与成岩因素共同导致储集层致密,致密化过程可分为压实孔隙骤减阶段、早期胶结减孔阶段、溶蚀作用增孔阶段和晚期胶结致密阶段共4个阶段;(4)油气大量充注期储集层孔隙度远低于10%,长8油层组先致密后成藏。     

安徽齐云山晚白垩世兽脚类恐龙足迹点沉积环境

安徽齐云山兽脚类足迹群是目前中国晚白垩世保存最好的恐龙足迹群之一,对其沉积环境的研究为恢复白垩纪末期恐龙动物群的生活环境提供了证据。研究区足迹全部为兽脚类凸型足迹,与无脊椎动物遗迹Palaeophycus tubularis和Scoyenia sp.保存在一起,指示陆相沉积中的浅水沉积。通过薄片鉴定,足迹层位主要为岩屑砂岩,其平均粒径、标准偏差、偏度和峰度4个粒度参数特征与典型的河相砂一致;粒级分布直方图、概率累积曲线图及散点图表明,足迹层位从下到上颗粒逐渐变细,水动力条件变弱,沉积环境由河床沉积转变为边滩沉积。综上,齐云山兽脚类足迹点沉积环境为大型曲流河沉积,足迹保存在边滩沉积的下部,是白垩纪末期干旱气候条件下兽脚类恐龙动物群的水源地。     

二元同位素测温技术及其在白云岩储层成因研究中的应用——以塔里木盆地中下寒武统为例

作为近年来新兴的实验技术,二元同位素(D47)测温技术已被应用于碳酸盐岩成岩环境的研究中。简要介绍了二元同位素测温技术的原理及应用方法,并以塔里木盆地中下寒武统白云岩为例,优选11块样品,测试其D47值和白云石的碳氧同位素,并计算出样品的成岩温度和古流体的δ~(18)O值。综合分析认为:样品中,颗粒白云岩形成于低温准同生—浅埋藏环境,成岩流体为海水;细晶白云岩为深埋藏成岩环境中原岩受到了高温重结晶作用的改造,成岩流体为地下热卤水;孔缝中的白云石胶结物是深埋藏成岩环境富镁热卤水沉淀作用的产物。研究证明二元同位素测温技术可以较好地恢复白云岩的成岩温度,减少储层成因的多解性,它为今后储层成因研究提供了一种新的手段和依据。     

Experimental study on the instability mechanism of the major-defect fractured rock

Based on calculations of rock fracture surface and angle, incremental-load creep experiments were conducted on two groups of major-defect fractured rock specimens in an RLW-2000 rheology test system. The research investigated the fracture type and the creep properties of major-defect fractured rock and analyzed the relationships between failure load and horizontal or vertical projection distance, and between each of theme and fracture area or angle. The results showed that rock fracture was divided into three types according to the distribution, including I, II, and III types. I, II, and III types were respectively an internal fracture running through neither the upper nor lower end, one through the upper or lower end and one through both upper and lower ends, and a III type was further sub-divided into III_I and III_II types. The instantaneous strain was larger than the creep strain under the same creep loading stage. As the creep loading increased on two groups of major-defect fractured rock, the instantaneous strain decreased abruptly and then increased abruptly, while the creep strain decreased rapidly at first and later increased near-linearly. When the failure angle was larger than the friction angle, failure load was positively correlated with failure angle yet was negatively correlated with vertical projection distance. Vertical projection distance and fracture angle, which decided fracture type, controlled rock failure load. Failure load increased in turn from I type to III type, and low-type fracture determined mainly failure load in multiply-fracture specimen.     

Geothermal potential evaluation and development prioritization based on geochemistry of geothermal waters from Kangding area,western Sichuan,China

Kangding geothermal area is located in the western Sichuan, belonging to southeastern margin of Tibetan Plateau. Similar to world-renowned south Tibetan and western Yunnan geothermal belt, western Sichuan has intensive surface thermal manifestations including boiling and hot springs. The emerging temperature of thermal waters ranges from 47 to 79 °C with total dissolved solids lying between 899 and 2550 mg/L. δ²H–δ¹⁸O isotopes indicate a meteoric source for the thermal waters and a significant positive oxygen-18 shift in the southern region. It is suggested that southern thermal waters experienced stronger water–rock interaction and are closer to thermodynamic equilibrium, which is also proved by the water type classification. The reservoir temperature calculated by empirical and theoretical chemical thermometry is 180–225 °C for the north and 225–310 °C for the south. Evidences of hydrogeochemistry, stable isotopes, geothermometry and radiocarbon dating indicate that southern region of Kangding area shows greater geothermal potential than the northern region. In addition, based on the hydrogeochemical modeling of mineral saturation, underlying problem of scaling is likely to occur in the study area. According to the results of reservoir temperature, south Kangding sub-district has greater potential in geothermal power generation and development than northern Kangding. Therefore, further exploration and drilling work should give priority to the south Kangding area.     

Hydrological situation of a typical watershed in the Loess Tableland Area of China over the past 30 years

Due to deficient water resources in the Loess Plateau, watershed management plays a very important role, not only for ecological and environmental protection but also for the social development of the region. To better understand the hydrological and water resource variations in the typical watershed of the Loess Plateau and the Qinghe River Basin, the influences of land cover and climate change were analysed, and a SWAT model was built to simulate the response of the hydrological situation to land cover changes that have occurred over the past 30 years. The results demonstrated that the main land cover change occurring in the Qinghe River Basin was the conversion of land cover from grassland to woodland and farmland from the late 1980s to 2010. Woodland and farmland took 87.36 and 10.55%, respectively, from the overall area transferred over 20 years and more than 18% of the total watershed area. Hydrological simulation results indicated that land cover played a predominant role in the hydrological variation of the Qinghe River Basin, although the effects of climate change should not be discounted. The significant changes in land cover could be superimposed by policy orientation and economic requirements. Although it is hard to evaluate the land cover changes and the corresponding hydrological responses in a simple language, related analyses have demonstrated an increasing trend of runoff in the dry season, while there is a somewhat decreasing trend during the flood season in the river basin. There results could be significant and provide a positive influence on both future flood control and the conservation of water and soil.     

火星快车HRSC线阵影像投影轨迹法近似核线重采样

火星快车高分辫率立体相机(high resolution stereo camera, HRSC)线阵推扫式影像具有分辫率高、全球覆盖性好等特点,对火星快车HRSL影像进行摄影测量处理可获取火星全球高分辫率地形数据,而影像匹配是自动获取地形数据的关键利用核线几何约束可以将影像匹配搜索范围由二维降至一维本文在构建火星快车HRSC线阵影像严格几何模型的基础上,提出了一种近似核线重采样方法首先,利用投影轨迹法分析 HRSC线阵影像核线的直线性与平行性;然后,将原始HRSC影像进行微分纠正生成水平影像,分析投影轨迹法得出的核线在水平影像上的几何关系并确定近似核线方向,再沿核线方向进行核线重排生成近似核线影像实验结果表明,本文算法生成的近似核线影像同名点上下视差优于1个像素,且在水平影像上进行近似核线重采样减少了由外方位元素变化引起的几何畸变,更有利于影像匹配。     

基于FY3A/MERSI影像的几种常用水体提取方法的比较分析

随着遥感技术的飞速发展,利用遥感数据来进行水资源的监测、调查和分析已经成为一种必然的趋势。通过选取新疆博湖县境内中国最大的内陆淡水湖-博斯腾湖为研究区,FY3A/MERSI影像为数据源,利用监督分类法从Landsat-ETM+影像提取水体,提取结果作为FY3A/MERSI影像水体提取精度验证的底图。采用单波段阈值法、基于阈值的多波段谱间关系法和基于阈值的水体指数法从FY3A/MERSI影像提取研究区水体,基于混淆矩阵法,提取结果分别与Landsat-ETM+影像底图作对比分析,最终得出结论,基于阈值的水体指数法中的归一化差异水体指数法提取研究区水体的总体精度最高,为96.37%,Khat为0.915。     

裂隙岩体三维柔度张量的数值试验方法

在裂隙岩体二维柔度张量数值试验的基础上,建立了裂隙岩体三维柔度张量及其表征单元体积（REV）尺度研究的简化数值试验方法。首先根据岩体裂隙的统计参数及分布规律,运用蒙特卡罗方法在研究域内获得与实际岩体裂隙同分布的三维随机裂隙网络,提取位于不同方位的岩体试件,运用二维柔度张量的数值试验方法求出各个平面方向上的二维柔度张量,然后根据二维与三维柔度张量的拓扑关系,用数学方法求解裂隙岩体的三维柔度张量。对于含3组正交全贯通裂隙的岩体,通过数值试验获得的柔度张量与理论解相比,其主对角线上各参数的误差在5%以内,表明该数值试验方法较为可靠。最后将此方法运用到小湾水电站工程中,确定左岸坝区裂隙岩体的应力REV为11 m×11 m×11 m,并获得该区域裂隙岩体的三维柔度张量。