水位下降卸荷诱发库岸边坡快速失稳机理分析

本文以某工程现场岩质边坡为例，采用与传统裂隙水压力分布不同的水压力分布方式和边坡裂隙中可能发生的水锤效应相耦合，分析研究了岩质边坡发生滑动的机理及稳定性。研究表明，本文所采用的水压力分布方式较为符合边坡中的水压力分布实际情况，可以给出一个较为合理的稳定系数。当考虑水锤效应时，岩质边坡的稳定系数大大降低，说明水锤效应加剧了边坡破坏失稳的过程。本文所采用的水压力分布方式与边坡裂隙中的水锤效应相耦合的计算方法，在边坡稳定性分析中具有参考意义。     

元谋干热河谷坡耕地土壤侵蚀造成的土地退化

在元谋干热河谷土壤侵蚀特征分析的基础上，对坡耕地土壤侵蚀造成的土地退化进行了模拟研究。结果表明，土壤侵蚀造成表层耕作土壤的物理性能下降、养分流失和水分入渗能力降低。表层耕作土壤的容重比下层土壤低12．7％，总孔隙度高10．9％，有机质高37．3％，120min累计入渗总量是下层土壤的1．6-2．2倍。模拟土壤侵蚀与土地生产力关系的小区试验结果显示，坡耕地每流失1cm表土，土地生产力水平平均下降4．54％。     

工业测量数据的可视化方法研究

简要介绍了测量获取离散点数据的一般手段，阐述了3维曲面重建的NURBS方法和空间Delauany三角剖分方法，简要说明了使用OpenGL进行3维开发的机制，并给出了3维空间交互和查询的实现步骤。为有效地发掘测量数据潜在的信息和规律提供了一条新的途径。     

季节指数及其在季节性监测资料分析和预报中的应用

基于灰色模型的诸多优点，作者选用GM(1，1)模型分析和预报形变监测序列。然而直接应用GM(1，1)灰色模型分析和预报具有季节性的监测序列时往往精度不高。因此，作者提出运用基于季节指数的“去季节波动”法与GM(1，1)混合建模，对监测资料进行分析与预报。基于均方差和平均绝对误差两个精度准则，作者对此方法与周期函数拟合模型进行了比较。结果表明，此方法提高了具有季节性波动监测序列的预报精度，且建模方法简便、快捷。     

西风带研究动态

本文较为详细地介绍了影响我国气候的重要因子——西风带的一些国内外最新研究动态,这些研究动态和研究成果将对山西省的气候研究起到积极作用。     

陕西省信用联社市县级计算机网络防雷工程设计分析

“山西省卫星农网”依托其省、市、县三级专门服务于农业的信息交流平台,能够及时地让农户了解国家和地方的农业政策及办事程序等,成为农户和政府间的信息桥梁,为广大农村提供准确的各类气象信息,有效地指导了农业生产,大大地减小了天气灾害损失。山西卫星农网作为山西省规模较大的农业专业网站,其影响和作用正逐步地发挥出来。     

Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.     

The influence of coupled physical swelling and chemical reactions on deformable geomaterials

Coupled thermo‐hydro‐mechanical‐chemical modelling has attracted attention in past decades due to many contemporary geotechnical engineering applications (e.g., waste disposal, carbon capture and storage). However, molecular‐scale interactions within geomaterials (e.g., swelling and dissolution/precipitation) have a significant influence on the mechanical behaviour, yet are rarely incorporated into existing Thermal‐Hydro‐Mechanical‐Chemical (THMC) frameworks. This paper presents a new coupled hydro‐mechanical‐chemical constitutive model to bridge molecular‐scale interactions with macro‐physical deformation by combining the swelling and dissolution/precipitation through an extension of the new mixture‐coupling theory. Entropy analysis of the geomaterial system provides dissipation energy, and Helmholtz free energy gives the relationship between solids and fluids. Numerical simulation is used to compare with the selected recognized models, which demonstrates that the swelling and dissolution/precipitation processes may have a significant influence on the mechanical deformation of the geomaterials.