青藏高原岩石圈三维电性结构

本文报道通过综合大地电磁调查数据研究青藏高原岩石圈三维电阻率模型的初步成果.大地电磁法调查区域已经覆盖了高原大部分面积,为全区三维电阻率成像研究打下了可靠的基础.对多个测区大地电磁数据进行精细的同化处理和反演成像,取得了青藏高原可靠的岩石圈三维电阻率结构图像.成像的区域为28°N—35°N,80°E—104°E.三维反演计算时采用的网格尺寸为20km×20km,垂直方向不等间距剖分为26层.结果表明,青藏高原现今岩石圈电阻率扰动主要反映印度克拉通对亚欧大陆板块俯冲引起的热流体运动和大陆碰撞和拆离产生的构造.在岩石圈地幔,察隅地块、喜马拉雅地块和拉萨地块东部联成统一的高电阻率地块,它们反映了向北东俯冲的印度克拉通.雅鲁藏布江、班公—怒江和金沙江缝合带都有明显的低电阻率异常,表明岩石圈深处有热流体活动.雅鲁藏布江、班公—怒江和金沙江缝合带都有明显的低电阻率异常,也表明它们的岩石圈还有流体活动.青藏高原东部的低阻区沿100°E向地幔下方扩大,反映了金沙江断裂带有切穿岩石圈的趋势.地幔电阻率平面扰动的模式显示,青藏高原东西部的地体碰撞拼合形式和方向是不同的.在青藏高原西部,羌塘、拉萨和喜马拉雅等地体从北到南碰撞拼合.在青藏高原东部,羌塘—拉萨、察隅、印支、雅安和扬子等地体多方向拆离拼合,在地壳造成不正交的拆离带和压扭构造系.从高阻-低阻区的分布看,东部的地体拼合有地幔的根源,今后还会进一步发展.察隅地块岩石圈对青藏高原东部的楔入,使其北部和东部地块的岩石圈发生拆离撕裂,也造成热流体上涌的低电阻率异常.     

COSEISMIC DISPLACEMENT FIELD OF THE WENCHUAN EARTHQUAKE DERIVED FROM STRONG MOTION RECORDS AND APPLICATION IN SLIP INVERSION

The development of high-rate GNSS seismology and seismic observation methods has provided technical support for acquiring the near-field real-time displacement time series during earthquake. But in practice, the limited number of GNSS continuous stations hardly meets the requirement of near-field quasi-real-time coseismic displacement observation, while the macroseismographs could be an important complement. Compared with high-rate GNSS, macroseismograph has better sensitivity, higher resolution(100~200Hz)and larger dynamic range, and the most importantly, lower cost. However, baseline drift exists in strong-motion data, which limits its widespread use. This paper aims to prove the feasibility and reliability of strong motion data in acquiring seismic displacement sequences, as a supplement to high-rate GNSS. In this study, we have analyzed the strong-motion data of Wenchuan M_S8.0 earthquake in Longmenshan fault zone, based on the automatic scheme for empirical baseline correction proposed by Wang et al., which fits the uncorrected displacement by polynomial to obtain the fitting parameters, and then the baseline correction is completed in the velocity sequence. Through correction processing and quadratic integration, the static coseismic displacement field and displacement time series are obtained. Comparison of the displacement time series from the strong motions with the result of high-rate GPS shows a good coincidence. We have worked out the coseismic displacement field in the large area of Wenchuan earthquake using GPS data and strong motion data. The coseismic displacement fields calculated from GPS and strong motions are consistent with each other in terms of magnitude, direction and distribution patterns. High-precision coseismic deformation can provide better data constraint for fault slip inversion. To verify the influence of strong-motion data on slip distribution in Wenchuan earthquake, we used strong motion, GPS and InSAR data to estimate the stress drop, moment magnitude and coseismic slip model, and our results agreed with those of the previous studies. In addition, the inversion results of different data are different and complementary to some extent. The use of strong-motion data supplements the slip of the fault in the 180km segment and the 270~300km segment, thus making the inversion results of fault slip more comprehensive. From this result, we can draw the following conclusions:1)Based on the robust baseline correction method, the use of strong motion data, as an important complement to high-rate GNSS, can obtain reliable surface displacement after the earthquake. 2)The strong motion data provide an effective method to study the coseismic displacement sequence, the surface rupture process and quick seismogenic parameters acquisition. 3)The combination of multiple data can significantly improve the data coverage and give play to the advantages of different data. Therefore, it is suggested to combine multiple data(GPS, strong motion, InSAR, etc.)for joint inversion to improve the stability of fault slip model.     

USE OF SEISMIC WAVEFORMS AND INSAR DATA FOR DETERMINATION OF THE SEISMOTECTONICS OF THE MAINLING MS6.9 EARTHQUAKE ON NOV.18, 2017

On November 18, 2017, a M_S6.9 earthquake struck Mainling County, Tibet, with a depth of 10km. The earthquake occurred at the eastern Himalaya syntaxis. The Namche Barwan moved northward relative to the Himalayan terrane and was subducted deeply beneath the Lhasa terrane, forming the eastern syntaxis after the collision of the Indian plate and Asian plates. Firstly, this paper uses the far and near field broadband seismic waveform for joint inversion (CAPJoint method)of the earthquake focal mechanism. Two groups of nodal planes are obtained after 1000 times Bootstrap test. The strike, dip and rake of the best solution are calculated to be 302°, 76° and 84° (the nodal plane Ⅰ)and 138°, 27° and 104° (the nodal plane Ⅱ), respectively. This event was captured by interferometric synthetic aperture radar (InSAR)measurements from the Sentinel-1A radar satellite, which provide the opportunity to determine the fault plane, as well as the co-seismic slip distribution, and assess the seismic hazards. The overall trend of the deformation field revealed by InSAR is consistent with the GPS displacement field released by the Gan Wei-Jun's team. Geodesy (InSAR and GPS)observation of the earthquake deformation field shows the northeastern side of the epicenter uplifting and the southwestern side sinking. According to geodetic measurements and the thrust characteristics of fault deformation field, we speculate that the nodal plane Ⅰ is the true rupture plane. Secondly, based on the focal mechanism, we use InSAR data as the constraint to invert for the fine slip distribution on the fault plane. Our best model suggests that the seismogenic fault is a NW-SE striking thrust fault with a high angle. Combined with the slip distribution and aftershocks, we suggest that the earthquake is a high-angle thrust event, which is caused by the NE-dipping thrust beneath the Namche Barwa syntaxis subducted deeply beneath the Lhasa terrane.     

潜水器在线绝缘检测方法研究

为了提高潜水器工作的安全性和可靠性,对潜水器的在线绝缘检测方法进行了研究。描述了无源检测法和有源检测法的工作原理,并基于有源检测法提出了绝缘检测对电气系统设计的要求,同时给出了绝缘故障的排查、定位和隔离方法。最后,通过在潜水器上的实际应用,验证了有源检测法的实用性和有效性。     

渔业节能减排技术推广影响因素调查分析——以大菱鲆循环水养殖技术为例

随着水产养殖业的不断发展,传统养殖技术带来的污染问题日益凸显,以工业化循环水养殖技术为代表的现代化养殖技术取代传统养殖技术将成为一种趋势。文章依托国家鲆鲽类产业技术体系产业经济岗位团队在鲆鲽类主产区养殖户的调查数据,从供求的角度对大菱鲆循环水养殖技术的推广现状进行分析,根据研究结果进一步提出相关对策。     

水环境中的信息有机物与“水域生态讯息学”的提出

信息有机物(或化感物质)系指存在于自然环境,对生物物种或生物类群生存和生长有促进或抑制作用,并能通过调控生物丰度与群落结构来影响生态系统和生态环境的微痕量有机物。目前已知的信息有机物大多是分子质量小于10~4Da的醇、酚、萜、酯、多肽等小分子物质,它们随水体迁移扩散,通过控制酶活性或光合系统等途径影响目标生物生存生长,作用强度受微生物分解和营养水平等多种因素影响。水体中信息有机物一般是通过有机溶剂萃取或固相萃取富集后用色质联用鉴定结构并测定含量。本文系统总结了近年来水环境中信息有机物及其检测方法的主要研究进展,归纳总结了高效灵敏的水体信息有机物检测方法,阐述了水环境中信息有机物种类、结构、作用机制及其对水域生态学的意义,在此基础上,提出了"水域生态讯息学"的新概念,诠释了"水域生态讯息学"的内涵,这对于拓展生态学研究内容,揭示水生生物学发生机制,持续利用水生生物资源具有重要的科学意义和实际价值。     

内蒙古大兴安岭东南部土城子组的发现及其意义

通过对研究区地层剖面、接触关系、区域地层对比及同位素测年等资料的研究,将发育于大兴安岭地区原满克头鄂博组下部的一套杂色复成分砾岩、含砾粗砂岩夹火山岩组合的地层厘定为上侏罗统土城子组,与燕辽地区之土城子组有较好的可比性.研究区土城子组的发现,一是填补了研究区土城子组的空白;二是通过对该组形成时代的讨论以及与上覆地层的接触关系研究,为该区与燕辽地区中生代地层划分与对比研究提供了依据,同时为兴安岭地区中生代地质演化研究提供参考.     

浅谈内蒙古大兴安岭地区中南部侏罗系与白垩系之界线

通过对大兴安岭地区侏罗系与白垩系之间不整合面的讨论,以地层区域对比及同位素测年数据等信息确定其界线,达到本区侏罗系与白垩系界线的可识别性、客观性和稳定性之目的.同时,对该区主要地层形成的大地构造环境的研究,认为土城子组是碰撞造山后伸展阶段形成的一套陆相红层,也是侏罗纪结束的标准层;而满克头鄂博组、玛尼吐组和白音高老组则是碰撞造山后垮塌阶段形成的火山地层.以大规模火山爆发为特征,本区开始了白垩纪地壳演化阶段.侏罗系与白垩系界线位于土城子组与满克头鄂博组之间,二者界线以区域不整合（假整合）为特征,不整合面形成于碰撞造山后伸展与垮塌的转换时期.     

基于InSAR和GPS观测数据的尼泊尔地震发震断层特征参数联合反演研究

利用日本ALOS-2和欧空局Sentinel-1A卫星获得的尼泊尔地震同震形变场,结合GPS同震位移数据,联合反演了断层滑动分布特征和空间展布.结果表明:尼泊尔地震的同震形变场主要集中在150km×100km的范围内,且分为南北两个相邻的形变中心,南形变中心的视线向抬升量约为1.2m,北形变中心的视线向沉降量约为0.8m,均位于发震断层上盘.位于形变抬升区的KKN4和NAST两个GPS站,抬升量和南向运动量均达到了m级,而远离震区的其他GPS台水平和垂直观测量均在1cm以内.联合反演得到的断层位错分布主要集中在沿走向150km,沿倾向70km的范围内,最大滑动量为5.59m,平均滑动量为0.94m.断层面倾角在浅部约为7°,随着深度增加,倾角逐渐变大,到垂直深度20km时倾角接近12°;5月12日MW7.2级余震位于主震破裂区的"凹"型滑动缺损区域;主震破裂区的上边界与MBT空间位置十分吻合,主震破裂区主要集中的MBT以北50~60km处,垂直深度为8~9km,倾角为9°,继续向北时主震破裂面以10°~12°的倾角向深延伸,在18~20km可能与MHT交汇.因此,初步判定MBT为此次地震的发震断层.     

遥感聚合图像的快速拓扑矢量化方法

鉴于当前遥感图像矢量化效率普遍不高,提出了一种遥感聚合图像的快速拓扑矢量化方法。该方法对聚合图像中的聚合对象进行唯一性标号,并将这个标号作为属性赋予生成的矢量多边形,通过矢量多边形的标号间映射关系便可以快速建立复杂岛屿多边形的拓扑包含关系。试验表明,该方法能够精确地完成斑块对象边界追踪及复杂岛屿多边形处理,并显著提高矢量化的速度。