基于精细数据处理的叠前深度偏移在琼东南盆地陵水凹陷坡折区的应用

琼东南盆地陵水凹陷,受坡折区崎岖海底和复杂地质构造的影响,导致该地区速度模型构建精度不高,从而严重影响到成像品质。针对坡折区的精确速度模型构建难题,首先采用组合多次波衰减、宽频处理、叠前信噪比增强等针对性处理技术,得到宽频带高信噪比的叠前数据,在此基础上统计分析不同水深速度规律,应用断控和地质约束速度建模技术,建立初始速度模型,然后利用基于宽频数据的高分辨断控约束网格层析反演技术,经过多次迭代完成深度域各向异性速度建模,并实现了陵水凹陷坡折区的高精度叠前深度偏移成像。叠前深度偏移成像显示,基于精细速度模型的叠前深度偏移技术科明显提高坡折区信噪比,改善成像质量,同时可有效消除地层同相轴扭曲的现象,恢复了地下地层的真实构造形态,从而可为目标评价与钻探决策提供更可靠地震资料。     

南海东北部陆架边缘第四纪高分辨率层序地层和沉积体系演化及其控制因素

The northeastern shelf margin of the South China Sea(SCS) is characterized by the development of large scale foresets complexes since Quaternary. Based on integral analysis of the seismic, well logging and paleontological data, successions since ～3.0 Ma can be defined as one composite sequence, consist of a set of regional transgressive to regressive sequences. They can be further divided into six 3 rd order sequences(SQ0–SQ5) based on the Exxon sequence stratigraphic model. Since ～1.6 Ma, five sets of deltaic systems characterized by development of wedge-shaped foresets complexes or clinoforms had been identified. High-resolution seismic data and the thick foresets allowed further divided of sub-depositional sequences(4 th order) of regression to transgression, which is basically consistent with published stacked benthic foram O-isotope records. Depositional systems identified in the study area include deltaic deposits(inner-shelf deltas and shelf-edge deltas), incised valleys, and slope slumping massive deposits. Since ～1.6 Ma, clinoforms prograded from the southern Panyu Lower Uplift toward the northern Baiyun Depression, shelf slope break migrated seaward, whereas the shelf edge of SQ0 migrated landward. The development of incised valleys in the continental shelf increased upward,especially intensive on the SB3 and SB2. The slumping massive deposits increased abruptly since SB2, which corresponds to the development of incised valleys. The evolution of depositional systems of continental slope mainly controlled by the combined influence of sea level changes, tectonic movements, sediment supply and climate changes. Since ～3.0 Ma, relative sea level of the northern SCS had been experienced transgression(～3.0 Ma BP) to regression(～1.6 Ma BP). The regional regression and maximum transgressions of the composite sequences were apparently enhanced by uplift or subsidence related to tectono-thermal events. In addition,climatic variations including monsoon intensification and the mid-Pleistocene transition may have enhanced sediment supply by increasing erosion rate and have an indispensable influence on the development of the incised valleys and 5 sets of deltaic systems since ～1.6 Ma.     

基于浮标资料的中国东部海域最大波高特征分析

利用原国家海洋局2010—2015年的浮标资料,计算渤、黄、东海有效波高和最大波高的线性关系,并通过1992—2011年共20 a的数值模拟有效波高资料计算中国东部海域各月的2.5 m、4 m、6 m以上最大波高频率和最大波高月极值分布。结果发现:中国东部海域由北至南,最大波高与有效波高的比值逐渐增大;最大波高频率和最大波高月极值空间分布均由渤海、黄海至东海逐渐增大,最大波高频率的极值12月最大,4或5月最小,最大波高月极值9月最大,4月最小。其时空分布表明:受不同天气系统影响,夏秋季台风较多,容易出现极值较大的最大波高;秋冬季冷空气较强,虽然最大波高极值相对较小,但大浪持续时间长、频率大、影响范围广。     

五味安神颗粒干法制粒工艺优化研究

目的：提高五味安神颗粒的产品质量,优化制备工艺。方法：通过单因素试验优化颗粒的制备工艺,以辊压制粒后的干颗粒粒径分布为考核指标,对影响干压制粒的轧辊压力、轧辊转速和物料的传送速度进行考察。结果：优化后的干法制粒工艺中间体颗粒得率达到64%,工艺参数为螺旋转速120rpm,轧辊转速26rpm,轧辊间隙0.8mm,整粒转速150rpm,工作压力120bar,整粒孔径1.5mm。结论：干法制粒工艺制备的中间体颗粒符合质量要求。     

基于声学调制解调器的声速剖面遥测技术

声速是海洋声呐测量中最重要的声学参数之一。拖缆式声速剖面仪可提供实时测量功能,但其缆长不能满足深海测量要求;自容式声速剖面仪可满足深海测量要求,但工作效率低。如何提高野外深海声速剖面测量工作效率是深海调查一项非常有意义的工作。文中详细介绍了基于声学调制解调器的声速剖面遥测系统的主要结构和功能,揭示了水声通信技术在深海非铠装缆测量中的应用优势。     

利用南极走航观测评估卫星遥感海表面温度

利用1989-2005年间南极走航观测的海表面温度,对目前3个主要的卫星反演的SST产品AVHRR(Advanced Very High Resolution Radiometer),TMI(TRMM Microwave Imager)和AMSR-E(Advanced Microwave Scanning Radiometer for the Earth Observing System)进行了较为系统的评估,并着重检验了它们在南大洋的准确性.结果表明,AVHRR SST比观测数据偏冷,白天的偏差为-0.12℃,夜晚的偏差为-0.04℃,而且南大洋的冷偏差更为显著.TMI SST比观测数据明显偏暖,白天的偏差为0.48℃,夜晚的偏差为0.57℃,其温差ΔT受37GHz风速影响,在强风速(>6m/s)下这种影响仍然存在.AMSR-ESST比观测数据偏暖,白天的偏差为0.34℃,夜晚的偏差为0.27℃,而且南大洋的暖偏差相对较大.AMSR-E SST温差受水汽影响,并在南大洋随着水汽的增加而增加.通过进一步比较微波(AMSR-E和TMI)和红外(AVHRR)遥感的SST在2004年北半球冬季(即南半球夏季)的差别,发现微波遥感在热带(15°S-15°N)和南大洋区域(45°S以南)比红外遥感偏暖,而且在南大洋区域的偏差相对较大,相反在北半球中纬度区域(15°~40°N)偏冷.AMSR-E与AVHRR SST的温差,从白天到夜晚有减小的趋势,而TMI与AVHRR SST的温差无明显的变化.     

高频电力线信息传输的电机模型与仿真

研究在电机驱动系统中,电力线通信的建模问题,着重讨论在高频时电机输入阻抗的特性下,电机模型的建立.通过实验测量得到电机和电力线在频率100 kHz～40 MHz的输入阻抗特性曲线,并分析高频输入阻抗的谐振特点.在Matlab中,提出基于阻抗公式的分析法、最小均方值误差估计法以及最优化方法进行模型的参数识别,将得到的参数代入模型中可以得到电机的阻抗模型.电机模型的精确度可以通过仿真曲线和测量曲线的逼近程度看出,从结果看仿真得到的阻抗曲线跟实际测量的阻抗曲线走向基本一致.     

Effect of polysaccharide from Enteromorpha prolifera on maize seedlings under NaCl stress

In this study, a polysaccharide from Enteromorpha prolifera (EP) was extracted and its effect on maize seedlings under NaCl stress was investigated. Firstly, the components and structure of the EP were determined. We found that EP is a sulfated polysaccharide of high-molecular weight (Mw, 1 840 KDa) heteropolysaccharides and the main monosaccharide is rhamnose. The polysaccharide was applied to explore its effect on the growth of maize seedlings and its defense response under a salt stress. The results show that EP could promote the growth of maize seedlings under the salt stress. In addition, EP was shown able to significantly regulate membrane permeability and adjustment of osmotic substances such as soluble protein, soluble sugar, and proline, antioxidant enzymes containing superoxide dismutase, catalase, peroxidase, and ascorbate peroxidase. Therefore, EP is an effective salt-resistant substance for the growth of maize seedlings under NaCl stress.     

Comparative study of otolith and sulcus morphology for stock discrimination of yellow drum along the Chinese coast

Otolith morphology is widely used for fish stock identification. The sulcus, a structure on the medial side of the otolith, is an important feature in morphological analysis. This study was conducted to evaluate the feasibility of using sulcus morphology for stock identification and to compare its performance with commonly used otolith morphology analysis. Otoliths were collected and analyzed from three geographical groups (the Huanghe (Yellow) River estuary, HHE;the Jiaozhou Bay, JZB;and the Changjiang (Yangtze) River estuary, CJE) of yellow drum Nibea albiflora. The results show that the analysis of sulcus morphology based on shape indices (SIs), elliptic Fourier coefficients (EFc), and a combination of the two parameters identified stocks at overall classification rates of 51.0%, 72.5%, and 73.2%, respectively. These classification rates are similar to those obtained using otolith morphology analysis (57.0%, 73.8%, and 76.5% by SIs, EFc, and their combination, respectively). The findings suggest that sulcus morphology is comparable to the commonly used otolith morphology for identifying stocks of sciaenids, such as the yellow drum. For both otolith and sulcus morphology, EFc could identify the stocks more efficiently than SIs, while the combination of SIs and EFc was even better.