Production of Bauxite Certified Reference Material (BARC-B1201) for Nine Property Values (Al2O3, Fe2O3, SiO2, TiO2, V2O5, MnO,Cr2O3, MgO and LOI) Traceable to SI Units

The National Centre for Compositional Characterisation of Materials (NCCCM) / Bhabha Atomic Research Centre (BARC) and National Aluminium Company Limited (NALCO), India have produced an Indian origin bauxite certified reference material (CRM), referred to as BARC-B1201, certified for major (Al₂O₃, Fe₂O₃, SiO₂, TiO₂, loss on ignition - LOI) and trace contents (V₂O₅, MnO, Cr₂O₃, MgO). Characterisation was undertaken by strict adherence to ISO Guides. A method previously developed and validated in our laboratory, using single step bauxite dissolution and subsequent quantitation (of Al₂O₃, Fe₂O₃, SiO₂, TiO₂, V₂O_5, MnO, Cr₂O₃ and MgO) by ICP-AES (SSBD ICP-AES) was used for homogeneity studies and an inter-laboratory comparison exercise (ILCE) of the candidate CRM. LOI was determined by thermo-gravimetric analysis. Property values were assigned after an ILCE with participation from seventeen reputed government and private sector laboratories in India. The CRM was certified for nine property values: Al₂O₃, Fe₂O₃, SiO₂, TiO₂, V₂O_5, MnO, Cr₂O₃, MgO and LOI, which are traceable to SI units.     

Seismic bearing capacity of foundations on sloping ground using power-type yield criteria

Acta Geotechnica - Experimental studies indicate that the yield parameters for soils remain generally stress dependent, in which case, the internal friction angle reduces continuously with an...     

On the interaction of mesoscale eddies and a tropical cyclone in the Bay of Bengal

Natural Hazards - Oceanic eddies span over a wide range of sizes and affect the thermodynamic properties of water column. By modifying the thermal structure of the upper ocean, these eddies...     

Estimation of site response functions for the central seismic gap of Himalaya,India

Natural Hazards - In the analysis of seismic hazards of a particular region, the site response functions play a significant role. Site response functions for the central seismic gap become more...     

Assessment of glacial lake development and downstream flood impacts of critical glacial lake

Natural Hazards - Glacial lakes are rapidly growing in response to climate change and glacier retreat which may lead to catastrophic socio-economic disasters. The failure of moraine-dammed lakes is...     

A Review on Chemical Stabilization of Peat

Geotechnical and Geological Engineering - Peat is a problematic or weak soil derived from fossilized organic material. The characteristics of peat like low shear strength (3–16 kPa),...     

Validation of SWH and SSHA from SARAL/AltiKa Using Jason-2 and In-Situ Observations

The focus of this study is the validation of significant wave height (SWH) and sea surface height anomaly (SSHA) obtained from the first Ka-band altimeter AltiKa onboard SARAL (Satellite for ARGOS and Altimeters). It is a collaborative mission of the Indian Space Research Organization and Centre National d'Etudes Spatiales (CNES). This is done using in-situ observations from buoy and Jason-2 measurements. Validation using buoy observations are at particular locations while that using Jason-2 altimeter is an attempt towards global validation of Altika products. The results clearly indicate that the SARAL/AltiKa provide high-quality data and the errors are within a predefined range of accuracy. A parallel validation of SWH from other altimeters, which monitored ocean since last decade, like EnviSAT and Jason-2 was also performed with buoy observations. The results clearly show that the accuracy of AltiKa SWH is much better than EnviSAT and comparable to reference mission Jason-2. The accuracy is quite good for the calm sea while in the rough seas the accuracy degrades some. The inter-comparison of SARAL/AltiKa SSHA with Jason-2 indicates a fair match between them. These validation exercises demonstrate the high quality of AltiKa products, usable for practical applications.     

SARAL/AltiKa Waveform Analysis to Monitor Inland Water Levels: A Case Study of Maithon Reservoir,Jharkhand, India

In the present study, behavior of the SARAL/AltiKa (Satellite with ARgos and ALtiKa) waveforms over Maithon Reservoir (～65 km² of surface area), Jharkhand, India, has been studied. The estimated water level has been compared with the in situ measurements at hydro-gauging station at the dam site. The problem of minimization of errors in the water level retrieval from AltiKa measurements has been resolved by improvement of the retracking method. A real retracking gate detection algorithm based on statistical analysis harnessing various physical parameters of the waveform has been developed, which has been applied to SARAL/AltiKa waveforms over the Maithon reservoir. Comparing the in-situ measurements with altimetry data (from cycle 1, 19 March 2013 to cycle 12, 8 April 2014) showed that it is crucial to improve the retracking method. Results showed accuracy of water level monitoring increased by nearly 76% by the newly developed waveform retracking algorithm over non-retracked water level. We also compared this new method with the existing ice-1 algorithm and found that with the new method there is improvement of ～27% over ice-1 retracked water level. The correlation coefficient values and root mean square values without retracking, with ice-1 algorithm and with newly developed retracking algorithm were 0.87, 0.91, and 0.95, and 8.12 cm, 2.08 cm, and 1.42 cm, respectively. This shows the proposed retracker performed better than ice-1. The retracking procedure helped in outliers' identification and substitution and with waveform fitting and waveform parameter extraction. This algorithm should have good performance capability for retrieving water level over inland water bodies like Maithon reservoir.     

Performance study of various spatial indexes on 3D geo-data in Geo-RDBMS

In the emerging era of information and communication technologies, geotechnology is one of the fastest growing fields. Geo-RDBMS is very important and evolving aspect for GIS, as it can manage large volume of spatial data inside RDBMS. The utilization of RDBMS for geospatial data was one of the important focuses of GIS professionals in last decades to store and manage 2D geo-data. However, the support for 3D geo-data inside RDBMS is still limited and is a challenging task for RDBMS providers. In this study, data organization and performance assessment of 3D geo-data inside RDBMS are carried out. In this process, various file-based 3D data models such as CityGML, COLLADA and KML are migrated to geo-RDBMS to bring entire 3D geo-data in common platform. Various spatial indexing techniques viz. R-Tree, B-Tree, GiST, etc. are applied on these 3D data models and best indexing techniques are studied for 3D GIS operations.     

Concentration of polybrominated diphenyl ethers (PBDEs) in sediment cores of Sundarban mangrove wetland, northeastern part of Bay of Bengal (India)

The paper presents the first comprehensive survey of congener profiles (12 congeners) of polybrominated diphenyl ethers (PBDEs) in core sediment samples (<63 microm) covering seven sites in Sundarban mangrove wetland (India). Gas-chromatographic analyses were carried out in GC-Ms/Ms for tri- to hepta- brominated congeners. Results pointed out a non-homogenous contamination of the wetland with summation operator(12) PBDE values ranging from 0.08 to 29.03 ngg(-1), reflecting moderate to low contamination closely in conformity to other Asian aquatic environments. The general order of decreasing congener contribution to the total load was: BDE 47>99>100>154, similar to the distribution pattern worldwide. Although tetrabromodiphenyl ether BDE 47 was found in all samples followed by hexabromodiphenyl ether BDE-154, they were not necessarily the dominant congeners. No uniform temporal trend on PBDE levels was recorded probably due to particular hydrological characteristics of the wetland and/on non-homologous inputs from point sources (untreated municipal wastewater and local industries, electronic wastes from the dump sites, etc.) of these compounds. Because of the propensity of PBDEs to accumulate in various compartments of wildlife and human food webs, evaluation of biological tissues should be undertaken as a high priority.