Establishing constraints on groundwater ages with Cl,C, H,and noble gases: A case study in the eastern Paris basin,France

Groundwaters from the Tithonian/Kimmeridgian, Oxfordian and Upper Dogger aquifers, within the eastern part of the Paris basin (France), were characterised using ³H, ¹⁴C and ³⁶Cl, and noble gases tracers, to evaluate their residence times and determine their recharge period. This information is an important prerequisite to evaluating the confinement properties of the Callovo-Oxfordian clay formation sandwiched between the Oxfordian aquifer and the Dogger aquifer, currently being investigated by the French nuclear waste management agency (Andra) for radioactive waste disposal. Data presented in this paper are used to test 4 hypotheses.     

Decoupling between the middle and upper crust during transpression-related lateral flow: Variscan evolution of the Aston gneiss dome (Pyrenees, France)

We present a structural, AMS, microstructural and kinematic study of the Aston gneiss dome (French Pyrenees), which consists of a core made up of orthogneiss and paragneiss intruded by numerous sills of Carboniferous peraluminous granite. The orthogneiss corresponds to a former Ordovician granitic laccolith. Four Variscan events have been evidenced in this gneiss dome: (i) D1 deformation observed only as relics in the orthogneisses and their country-rocks located above the sillimanite isograd, and characterized by a NS to NE–SW non coaxial stretch associated to top to the south motions (NS convergence); (ii) D2-a deformation observed in the orthogneisses and their country-rocks, mainly migmatitic paragneisses, located below the sillimanite isograd and in the peraluminous granites whatever their structural level, and characterized by an EW to N120°E stretch associated to a top to the east flat shearing (lateral flow in the hot middle crust in a transpressive regime); (iii) D2-b deformation characterized by EW-trending megafolds corresponding to the domes in the middle crust and by EW-trending tight folds with subvertical axial planes in the metasedimentary upper crust; (iv) subvertical medium-temperature mylonitic bands developed by the end of the transpression.The Aston massif is a good example of decoupling between a cold upper crust and a hotter middle crust overheated by a thermal event originated in the upper mantle. This decoupling allowed the lateral flow of the migmatitic middle crust along a direction at high angle with respect to the more or less NS-trending direction of convergence. We suggest that the HT-LP metamorphism developed before the formation of the domes during D2-a, coevally with the emplacement of numerous sills of peraluminous granite, whereas the emplacement of the large calc-alkaline plutons in the upper crust occurred by the end of D2-b. Our data invalidate the previous geodynamical models based on either early or late extensional regime to explain the development of the HT-LP metamorphism. This new interpretation of the dynamics of the Variscan crust of the Pyrenees is consistent with recent studies conducted in Archaean and Palaeoproterozoic hot continental crusts having undergone oblique convergence, and characterized by a competition between vertical thickening and lateral flow induced by the important rheological contrast between two thermally different levels.     

Efficiency of a two-step upscaling method for permeability evaluation at Darcy and pore scales

This work presents a new subdivision method to upscale absolute permeability fields. This process, called two-step method, consists in (i) solving micro-scale equations on subdomains obtained from the full domain regular decomposition and (ii) solve a second upscaling with Darcy’s law on the permeability fields obtained in the first step. The micro-scale equations used depend on the case studied. The two-step upscaling process is validated on randomly generated Darcy-scale permeability fields by measuring the numerical error induced by upscaling. The method is then applied to real domains obtained from sandstone micro-tomographic images. The method specificities due to pore-space structure are discussed. The main advantage of the two-step upscaling method resides in the drastic reduction of computational costs (CPU time and memory usage) while maintaining a numerical error similar to that of other upscaling procedures. This new upscaling method may improve permeability predictions by the use of finer meshes or larger sample volumes.     

Microtextural investigation (SEM and TEM study) of phyllosilicates in a major thrust fault zone (Monte Perdido, southern Pyrenees): impact on fault reactivation

Thrusting fault zone in foreland basins are characterized by highly foliated zones generally enriched in phyllosilicates which can play a major role on the mechanical behaviour of the fault. In this context, investigations of synkinematic clay minerals permit to determine the origin of the fluid from which they precipitated as well as the mechanisms of deformation. Our study is focused on clay mineral assemblages (illite and chlorite) in a major thrust fault located in the Monte Perdido massif (southern Pyrenees), a shallow thrust that affects upper cretaceous-paleocene platform carbonates and lower Eocene marls and turbidites. It implied 3?km of displacement of the Monte Perdido thrust unit with respect to the underlying Gavarnie unit. In this area the cleavage development by pressure-solution is linked to the Monte Perdido and Gavarnie thrust activity. The core zone of the fault, about 6?m thick, consists of an interval of intensely deformed clay-bearing rocks bounded by major shear surfaces. The deformed sediment is markedly darker than the protolith. Calcite-quartz shear veins along the shear planes are abundant. Detailed SEM and TEM observations of highly deformed fault zone samples indicate that clay mineral enrichment in the core zone of the fault is not only related to passive increase by pressure-solution mechanism but that dissolution?Crecrystallization of phyllosilicates occurs during deformation. A mineral segregation is observed in the highly deformed zone. Newly formed 2M ₁ muscovite is present along the cleavage whereas IIb chlorite crystals fill S_V2 shear veins suggesting syntectonic growth of phyllosilicates in the presence of fluids in low-grade metamorphic conditions. These mineralogical reactions act as weakening processes and would favour Monte Perdido fault creeping.     

Influence of dissolution/reprecipitation reactions on metamorphic greenschist to amphibolite facies mica 40Ar/39Ar ages in the Longmen Shan (eastern Tibet)

Linking ages to metamorphic stages in rocks that have experienced low‐ to medium‐grade metamorphism can be particularly tricky due to the rarity of index minerals and the preservation of mineral or compositional relicts. The timing of metamorphism and the Mesozoic exhumation of the metasedimentary units and crystalline basement that form the internal part of the Longmen Shan (eastern Tibet, Sichuan, China), are, for these reasons, still largely unconstrained, but crucial for understanding the regional tectonic evolution of eastern Tibet. In situ core‐rim ⁴⁰Ar/³⁹Ar biotite and U–Th/Pb allanite data show that amphibolite facies conditions (~10–11 kbar, 530°C to 6–7 kbar, 580°C) were reached at 210–180 Ma and that biotite records crystallization, rather than cooling, ages. These conditions are mainly recorded in the metasedimentary cover. The ⁴⁰Ar/³⁹Ar ages obtained from matrix muscovite that partially re‐equilibrated during the post peak‐P metamorphic history comprise a mixture of ages between that of early prograde muscovite relicts and the timing of late muscovite recrystallization at c. 140–120 Ma. This event marks a previously poorly documented greenschist facies metamorphic overprint. This latest stage is also recorded in the crystalline basement, and defines the timing of the greenschist overprint (7 ± 1 kbar, 370 ± 35°C). Numerical models of Ar diffusion show that the difference between ⁴⁰Ar/³⁹Ar biotite and muscovite ages cannot be explained by a slow and protracted cooling in an open system. The model and petrological results rather suggest that biotite and muscovite experienced different Ar retention and resetting histories. The Ar record in mica of the studied low‐ to medium‐grade rocks seems to be mainly controlled by dissolution–reprecipitation processes rather than by diffusive loss, and by different microstructural positions in the sample. Together, our data show that the metasedimentary cover was thickened and cooled independently from the basement prior to c. 140 Ma (with a relatively fast cooling at 4.5 ± 0.5°C/Ma between 185 and 140 Ma). Since the Lower Cretaceous, the metasedimentary cover and the crystalline basement experienced a coherent history during which both were partially exhumed. The Mesozoic history of the Eastern border of the Tibetan plateau is therefore complex and polyphase, and the basement was actively involved at least since the Early Cretaceous, changing our perspective on the contribution of the Cenozoic geology.     

The junction of Fensch and Moselle rivers,France; mineralogy and composition of river materials

The Moselle river flows in the north-east of France, from Vosges Mountains to neighboring countries Luxembourg and Germany. One of its tributaries, the Fensch river, drains a highly industrialized watershed, strongly impacted by mining, smelting and surfacing activities. The objective of this work, part of a general research program on Moselle watershed (Zone Atelier Moselle) was to assess the impact of the polluted Fensch river on the global quality of the Moselle river. For that purpose, water, sediments and suspended particulate matter were sampled in both rivers, upstream and downstream the junction. Four main sampling campaigns were carried out, in winter during a flood event and in spring at low water level. On a first step, mineralogical analyses (XRD and FTIR) and chemical analyses (ICP-MS, ICP-AES), were performed on sediments, suspended particulate matters and filtered waters. Major and trace elements concentrations were obtained on two different granulometric fractions (0–2 mm and 0–50 μm) revealing the enrichment in heavy metals of fine particles. From one collecting campaign to another, seasonal variations could be evidenced on suspended matter composition even though major minerals (calcite, quartz and kaolinite) were always present. Furthermore, spatial variations were evidenced for Fensch and Moselle downstream sediments. Thus, very fine-grained sediments, poorly crystallized, displaying at the same time higher metal concentrations and higher organic matter content than in Fensch river material, were collected downstream, in a low hydrodynamic conditions zone, assumed as a preferential sedimentary zone or even as a placer. Strong correlations could be revealed between iron content and contaminant concentrations, confirming the origin of polluted material.     

Deformation pattern in a heterogeneous material: Folded and cleaved sedimentary cover immediately overlying a crystalline basement (Oisans, French Alps)

Particularly well exposed structures in folded and cleaved sedimentary cover immediately overlying a crystalline basement have been studied. Chemical analysis (X.R.F. and microprobe) reveal pressure solution process and give the possibilities of measurement of mass transfer. Study of fluid inclusion veins has determined the temperature pressure conditions: thermal effect of the basement and decrease of temperature and pressure with the age of various synkinematic veins.Characteristic examples of the behaviour of a heterogeneous material during coaxial and non-coaxial deformation are shown:

1. (1) Successive different asymmetrical folds, various cleavages and fractures appear in a shear zone parallel to the main fabric with variations of thickness and rock behaviour.

2. (2) Evolution of cleavage in such a shear zone (with or without slipping) is linked to the relations between the rotation of contraction direction and the rate of the cleavage process.

3. (3) Fold axes changed from the horizontal y direction to the vertical (or E—W transversal to the crystalline massif) X direction, with increase of the (X/Z) and (X/Y) ratios (obtained by fossils and reconstructed fold shape). This strain is always heterogeneous and the most deformed zone frequently evolves to discontinuities with slip.

4. (4) Indentation exists on all scale: from hard object (100 μ, with parenthesis form of pressure solution cleavage apparent on map distribution of various element) to basement block (with variation of strain value in the indented cover).

A model of the evolution of the deformation of sedimentary cover immediately overlying a crystalline basement is given in conclusion.