Characteristics of Scour and Deposition in Front of Breakwaters Under Irregular Broken Clapotis

First the scour and deposition patterns of the sandy seabed in front of a vertical breakwater under the action of irregular broken clapotis are investigated experimentally and classified into five types: scour type Ⅰ , scour type Ⅱ, scour type Ⅲ, deposition type Ⅰ, and deposition type Ⅱ . Secondly, the processes of formation of scour and deposition patterns are probed in comparison with those induced by regular broken clapotis and standing waves. Thirdly, the criteria for distinguishing scour and deposition patterns under irregular broken clapotis are presented.     

Longitudinal strength of a high-speed ferry

The longitudinal strength of the high-speed ferry was investigated by subjecting the ship's hull girder to long-term loads obtained from a frequency-domain panel code. Prior to the statistical analysis, linearly computed transfer functions were corrected for nonlinear effects, yielding two sets of transfer functions valid for different wave amplitudes. One set corresponded to the hogging condition; the other set, to the sagging condition. Two regular equivalent design waves were specified that resulted in loads representing the most severe global design load conditions. The still-water loading condition, yielding a still-water vertical bending moment in hogging, was superimposed on the wave-induced loads to obtain the total (design) loads in hogging. For the sagging condition only, additional impact-related loads were superimposed to obtain the total (design) loads in sagging. A finite element model of the ship's structure was subjected to pressure distributions according to the two regular design waves. For comparison with classification society rule values, a simple beam theory strength analysis of the ship's midship section was performed first, and then another finite element analysis was carried out, whereby the imposed loads were tuned to the rule values of vertical bending moments. Rule-based magnitudes of nominal maximum longitudinal stress deviated significantly (25–39%) from comparable stresses obtained by the panel code based finite element analysis. However, stresses obtained from the rule-based finite element analysis agreed more favorably, especially in hogging. In the uppermost deck, for example, the panel code based compressive stress was only 9% larger than the comparable stress from the rule-based finite element analysis.     

Development of two novel CYP-antibodies and their use in a PCB exposure experiment with Mytilus edulis

In an attempt to learn more about the cytochrome P450 (CYP) system of mussels, we used protein databases and alignment software to extract highly conserved CYP sequences. From these alignments synthetic peptides were produced and used for rabbit immunisation, which yielded polyclonal antibodies against the CYP families 2 and 4. The antibodies were evaluated with Western Blot and ELISA assays, using digestive gland microsomal samples from the mussel Mytilus edulis. Western Blots revealed immunoreactions for both antibodies. The anti-CYP2 sequence rendered one major immunopositive protein of ≈49 kDa size, and weak signals for proteins of ≈41 and 56 kDa size. The anti-CYP4 sequence rendered two major bands of ≈56 and 59 kDa size, and also a weak immunoreaction with a protein of ≈43 kDa size. ELISA rendered only weak signals even with a 1:50 dilution of IgG-purified serum. A 10-day exposure to Aroclor 1254 did not appear to affect any of the immunopositive proteins, while total PCBs in soft bodies increased from 14–40 ng/g DW in controls to 373–638 ng/g DW in exposed mussels.     

Simulating a heavy metal spill under estuarine conditions: Effects on the clam Scrobicularia plana

We describe the effect of heavy metals Zn, Cd, Pb and Cu on the induction of methallothioneins on the clam Scrobicularia plana along a salinity gradient simulated under laboratory conditions. The clams were exposed to constant heavy metal concentrations in a dynamic estuary simulator during a 15-day assay to investigate possible induction of metal-binding proteins in them. The concentration of heavy metals in water was analysed. Clams were analysed for methallothionein concentrations. The speciation of Zn, Cd, Pb and Cu along the salinity gradient was modelled. Zn showed the highest concentrations and its prevalent species was the free ion. Intersite differences have been observed in methallothionein concentration and related to the salinity gradient. It seems that synthesis of methallothioneins is the result of physiological forces acting in concert with the changes in the chemical speciation of metals, owing to the trace metals uptake is controlled by means of an interaction of physiology and physicochemistry.     

热带大西洋年际和年代际变率的时空结构模拟

使用美国夏威夷大学发展的中等复杂程度海洋模式(IOM)在给定表面强迫条件下模拟了热带大西洋上层海洋年际和年代际变率的时空结构.利用NCEP的41a(1958～1998年)逐月平均表面资料作为强迫场,积分海洋模式41a作为控制试验,并利用模式分别做动量(风应力)通量和热量通量无异常变化的平行试验,与控制试验作比较.对3组试验模拟上层海洋变率状况的比较,并按年际和年代际时间尺度分别分析,揭示表面风应力和热通量异常对海表面温度和温跃层深度变化的影响,并比较了其影响的相对重要性.结果表明模式成功地模拟出了热带大西洋上层海洋的变率.模式模拟的海表面温度年际变化主要表现为弱ENSO型,年代际变化表现为南、北大西洋变化相反的偶极子型.在年际时间尺度上,热力强迫和动力强迫对海表温度变化都有贡献,其中赤道外海表面温度异常(SSTA)变化主要由热通量异常引起,而近赤道SSTA的变化主要由动量异常强迫引起.在年代际时间尺度上,热通量强迫的作用远比动量强迫重要.模式不仅能够模拟SST在年际和年代际时间尺度上的变率,还能够模拟温跃层深度在年际和年代际时间尺度上的变率.年际和年代际时间尺度上,温跃层深度的变率主要由动量异常决定,热通量异常强迫的贡献很小.     

厦门海域鱼体稀土元素的生态化学特征

于1995—1996年在厦门海域采集了28种鱼类样品，用ICP—MS法测定了15种稀土元素(REE)的含量，研究了鱼体稀土元素的组成和分布模式及与海水环境之间的关系。结果表明，厦门海域鱼体REE总量介于12．4—596．5ng／g，平均为(77．5l2．8)岭g。鱼体明显官集轻稀土，同时轻、重稀土之间则存在较大的分馏作用，说明轻稀土的生物学效应比重稀土更为显著。鱼类稀土元素分布模式总体上与海水REE分布模式接近，并且鱼类REE含量与近岸陆架海水REE含量之间有很好的相关性，说明海洋鱼类对稀土元素的利用遵从丰度规律。鱼类对稀土元素的富集系数在103以上。稀土元素沿厦门海域食物链的迁移传递没有表现出明显的生物放大作用。     

Modeling of Multi-Freedom Ship Motions in Irregular Waves with Fuzzy Neural Networks

1 .IntroductionAshiptravelingatseaundergoesundesirablewave inducedmotions ,namely ,surge ,sway ,heav ing ,rolling ,pitchingandyaw .Thesemotionsoftencauseproblemstothecrew ,theonboardequip mentand ,intheworstcase ,thesafetyofthevessel.Tominimizethewave inducedshipmotions ,controlsystemsmaybeapplied .Theaccuratemodelingofshipmotionsisthereforeveryimportantforshipdesignanddesignofmotioncontrolsystems .Manyresearchershavedevelopedshipmotionpredictionmethodsbasedonthepotentialflowtheo ries (Dong ,…     

A New Probability of Detection Model for Updating Crack Distribution of Offshore Structures

1 .IntroductionNondestructiveinspection (NDI)isveryimportantforensuringthereliabilityofoffshorestructuresintheirservicelives (Lauraetal.,1 996 ) .Itiswellknownthatdetectionofflawsinvolvesconsider ablestatisticaluncertainties.Asaresult,theprobabilityofdetection (POD)forallflawsofagivensizehasbeenusedintheliteraturetodefinethecapabilityofaparticularNDItechniqueinagivenen vironment.SincethedataofPODusuallyscatterlargely ,itisdifficulttodeterminewhichmodelfitstheavailabledatabest.Thismodelun…     

Neural Network-Based Active Control for Offshore Platforms

1 .IntroductionWiththedevelopmentofoceantechnology ,moreandmoreextremelylargeandlongflexibleoff shoreplatformsusedforoilexplorationanddrillingoperationarebuiltinhostileoceanenvironments .Ingeneral,thiskindofplatformsisanonlineardistributedparametersystemanditsnaturalfrequencyfallsclosertothedominantwavefrequencieswiththeincreaseofwaterdepth .Besides ,itsstructureisverycomplexandtheexternalwaveforceontheplatformisuncertain .Thus ,theseplatformsarepronetoexcessivewave inducedoscillationsunderbot…     

Calibration of JASON-1 Altimeter over Lake Erie

This article describes absolute calibration results for both JASON-1 and TOPEX Side B (TSB) altimeters obtained at the Lake Erie calibration site, Marblehead, Ohio, USA. Using 15 overflights, the estimated JASON altimeter bias at Marblehead is 58 ± 38 mm, with an uncertainty of 19 mm based on detailed error analysis. Assuming that the TSB bias is negligible, relative bias estimates using both data from the TSB-JASON formation flight period and data from 48 water level gauges around the entire Great Lakes confirmed the Marblehead results. Global analyses using both the formation flight data and dual-satellite (TSB and JASON) crossovers yield a similar relative bias estimate of 146 ± 59 mm, which agrees well with open ocean absolute calibration results obtained at Harvest, Corsica, and Bass Strait (e.g., Watson et al. 2003). We find that there is a strong dependence of bias estimates on the choice of sea state bias (SSB) models. Results indicate that the invariant JASON instrument bias estimated oceanwide is 71 mm, with additional biases of 76 mm or 28 mm contributed by the choice of Collecte Localisation Satellites (CLS) SSB or Center for Space Research (CSR) SSB model, respectively. Similar analysis in the Great Lakes yields the invariant JASON instrument bias at 19 mm, with the SSB contributed biases at 58 mm or 13 mm, respectively. The reason for the discrepancy is currently unknown and warrants further investigation. Finally, comparison of the TOPEX/POSEIDON mission (1992-2002) data with the Great Lakes water level gauge measurements yields a negligible TOPEX altimeter drift of 0.1 mm/yr.